This chapter describes how to install the Windows Vista Ultimate operating system onto a Sun Ultra 27 workstation.
Before beginning the operating system installation, make sure that you have:
Downloaded the latest software for your workstation. See Chapter 2, Downloading Driver Packages.
Configured the system BIOS and prepared disks as described in Chapter 3, Preparing Disks for the Operating System.
The complete Microsoft Windows Vista Ultimate installation process is not documented in this section. This section documents only the steps that are specific for installing Windows Vista Ultimate on your Sun workstation.
The Windows installation formats the drive you designate as the boot disk. Any pre-existing data on that disk will be lost.
Make sure that you have completed all of the requirements listed in Installation Requirements.
Power cycle your workstation.
The BIOS POST process begins.
Press F8 when the Press F8 for BBS POPUP prompt appears on the BIOS POST screen (see Figure 4–1).
The BBS POPUP menu allows you to select a boot device.
Once the BIOS POST process is complete, the Boot Device menu appears (see Figure 4–2).
Insert the Windows media CD in the server’s DVD drive now.
Select the DVD/CD-ROM drive or the CD image from the Boot Device menu and press Enter.
If prompted with Press any key to boot from CD, quickly press any key.
The Windows installation wizard starts.
Proceed through the installation wizard until you see the Installation Type page displayed (see Figure 4–3), and then click Custom (advanced).
At the Where Do You Want to Install Windows page (see Figure 4–4), do one of the following:
If you do not want to override the Windows Default partition information, click Next and skip to Step 9.
If you do want to override the Windows default partition information, click the Driver Options (advanced) option and proceed to the next step.
Formatting or repartitioning a pre-existing partition destroys all data on the partition.
At the Where Do You Want to Install Windows page with driver options (see Figure 4–4), do the following.
The Windows installation begins.
The system will reboot multiple times during the installation process.
When Windows installation is complete, Windows starts and prompts you to change the user password. Click OK and proceed to setup the initial user login account.
Once the initial user account is created, the Windows Vista Ultimate desktop is displayed.
When done, proceed to Chapter 7, Updating the Critical Drivers and Software.