JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Fire X4800 Server Service Manual
Oracle Technology Network
Library
PDF
Print View
Feedback
search filter icon
search icon

Document Information

Using This Documentation

Product Information Web Site

Documentation and Feedback

About This Documentation (PDF and HTML)

Contributors

Change History

Sun Fire X4800 Server Service Manual Overview

Server and Component Overview

Sun Fire X4800 Server Overview

Component Overviews

Power and Reset

Power Modes

Power Button and Power OK LED

How to Power On the Server

How to Power Off the Server

Controlling Server Power Remotely

Removing and Installing Components

Preparing for Service and Operation

Removal and Installation Procedures

Removing and Installing a Power Supply (CRU)

Removing and Installing a Hard Drive (CRU)

Removing and Installing a Hard Drive Filler

Replacing the Hard Drive Backplane (FRU)

How to Remove the Hard Drive Backplane

Hard Drive Backplane Cable Routing and Designations

How to Install the Hard Drive Backplane

Adding, Removing, and Installing a CMOD (CRU)

CPU Module (CMOD) Designation and Population Rules

Removing and Installing a CMOD Filler

How to Replace the CMOD Battery (CRU)

Removing and Installing DIMMs (CRU)

DIMM Population Rules

Removing and Installing a RAID Expansion Module (CRU)

How to Replace the RAID Expansion Module Battery (CRU)

Removing and Installing a Fabric Expansion Module (CRU)

Replacing a CPU and Heatsink Assembly (FRU)

Removing and Installing a Fan Module (CRU)

Replacing a Fan Module Controller Board (FRU)

Removing and Installing a NEM or a NEM Filler (CRU)

Removing and Installing a PCIe EM (CRU)

Removing and Installing the Service Processor Module (CRU)

Removing and Installing the Multi port Cable

Removing and Installing the Subassembly Module (FRU)

Sun Fire X4800 Server Service Procedures, and Information

Managing FRUID Information

Firmware Information and Procedures

How to Access the BIOS Setup Utility

Updating the CPLD

Component LED Locations and Meanings

Sun Fire X4800 Server Specifications

Physical Specifications

Power Specifications

Environmental Specifications

Index

How to Install the Hard Drive Backplane

Before You Begin

  1. Prepare the server for service. See How to Prepare for Service.
  2. Remove the hard drive backplane. See How to Remove the Hard Drive Backplane.
  3. Join together the backplane and the frame (1).
    image:An illustration showing how to install the HD backplane.
  4. Orient the hard drive backplane assembly with the connectors on the backplane facing toward the back of the server.
  5. Insert the hard drive backplane into the server and position it against the back wall of the drive bay (2).
  6. Hold the hard drive backplane assembly flat against the back wall of the drive bay and align the screw holes in the assembly with the captive screws.

    For ease of installation, align the center screw first.

  7. From the front of the server, use a No. 1 Phillips screwdriver to tighten the three captive screws and secure the hard drive backplane assembly (3).
  8. Connect the SAS cables and the one SAS power cable to the hard drive backplane (4).

    See Hard Drive Backplane Cable Routing and Designations for cable routing and designations.

  9. Install the hard drives into their original slots. See How to Install a Hard Drive.
  10. Install the CMODs and filler modules into their original slots. See How to Install a CPU Module (CMOD).
  11. Install the AC power cables. See How to Remove and Install AC Power Cables.
  12. Prepare the server for operation. See How to Prepare for Operation.
Copyright © 2010, 2012, Oracle and/or its affiliates. All rights reserved. Legal Notices
Previous Next