With asadmin, use the following command to list the monitoring parameters available:
list --user admin --port 4848 -m server-instance-name.http-service.*
where server-instance-name is the name of the server instance.
Use the following command to get the values:
get --user admin --port 4848 -m server.http-service.parameter-name.*
where parameter-name is the name of the parameter to monitor.
Statistics collection is enabled by default. Disable it by adding the following property to domain.xml and restart the server:
<property name="statsProfilingEnabled" value="false" />
Disabling statistics collection will increase performance.
You can also view monitoring statistics with the Admin Console. The information is divided into the following categories:
The DNS cache caches IP addresses and DNS names. Your server’s DNS cache is disabled by default. In the DNS Statistics for Process ID All page under Monitor in the web-based Administration interface the following statistics are displayed:
If the DNS cache is disabled, the rest of this section is not displayed.
By default, the DNS cache is off. Enable DNS caching with the Admin Console by setting the DNS value to “Perform DNS lookups on clients accessing the server”.
The number of current cache entries and the maximum number of cache entries. A single cache entry represents a single IP address or DNS name lookup. Make the cache as large as the maximum number of clients that access your web site concurrently. Note that setting the cache size too high is a waste of memory and degrades performance.
Set the maximum size of the DNS cache by entering or changing the value in the Size of DNS Cache field of the Performance Tuning page.
The hit ratio is the number of cache hits divided by the number of cache lookups.
This setting is not tunable.
If you turn off DNS lookups on your server, host name restrictions will not work and IP addresses will appear instead of host names in log files.
It is possible to also specify whether to cache the DNS entries. If you enable the DNS cache, the server can store hostname information after receiving it. If the server needs information about the client in the future, the information is cached and available without further querying. specify the size of the DNS cache and an expiration time for DNS cache entries. The DNS cache can contain 32 to 32768 entries; the default value is 1024. Values for the time it takes for a cache entry to expire can range from 1 second to 1 year specified in seconds; the default value is 1200 seconds (20 minutes).
Do not use DNS lookups in server processes because they are resource-intensive. If you must include DNS lookups, make them asynchronous.
If asynchronous DNS is disabled, the rest of this section will not be displayed.
The number of name lookups (DNS name to IP address) that have been done since the server was started. This setting is not tunable.
The number of address loops (IP address to DNS name) that have been done since the server was started. This setting is not tunable.
The current number of lookups in progress.
The file cache caches static content so that the server handles requests for static content quickly. The file-cache section provides statistics on how your file cache is being used.
For information on tuning the file cache, see HTTP File Cache.
Number of Hits on Cached File Content
Number of Cache Entries
Number of Hits on Cached File Info
Heap Space Used for Cache
Number of Misses on Cached File Content
Cache Lookup Misses
Number of Misses on Cached File Content
Max Age of a Cache Entry: The maximum age displays the maximum age of a valid cache entry.
Max Number of Cache Entries
Max Number of Open Entries
Is File Cached Enabled?: If the cache is disabled, the other statistics are not displayed. The cache is enabled by default.
Maximum Memory Map to be Used for Cache
Memory Map Used for cache
Cache Lookup Hits
Open Cache Entries: The number of current cache entries and the maximum number of cache entries are both displayed. A single cache entry represents a single URI. This is a tunable setting.
Maximum Heap Space to be Used for Cache
Connections Terminated Due to ClientConnection Timed Out
Max Connection Allowed in Keep-alive
Number of Hits
Connections in Keep-alive Mode
Connections not Handed to Keep-alive Thread Due to too Many Persistent Connections
The Time in Seconds Before Idle Connections are Closed
Connections Closed Due to Max Keep-alive Being Exceeded
Average Queuing Delay: Average queueing delay is the average amount of time a connection spends in the connection queue. This represents the delay between when a request connection is accepted by the server, and a request processing thread (also known as a session) begins servicing the request.
If you need to disable access logging, in HTTP Service click Add Property, and add the following property:
You can set the following access log properties:
Rotation (enabled/disabled). Enable rotation to ensure that the logs don’t run out of disk space.
Rotation Policy:ime-based or size-based. Size-based is the default.
Initial Thread Count
The Thread Count parameter specifies the maximum number of simultaneous requests the server can handle. The default value is 5. When the server has reached the limit or request threads, it defers processing new requests until the number of active requests drops below the maximum amount. Increasing this value will reduce HTTP response latency times.
In practice, clients frequently connect to the server and then do not complete their requests. In these cases, the server waits a length of time specified by the Request Timeout parameter.
Also, some sites do heavyweight transactions that take minutes to complete. Both of these factors add to the maximum simultaneous requests that are required. If your site is processing many requests that take many seconds, you might need to increase the number of maximum simultaneous requests.
Adjust the thread count value based on your load and the length of time for an average request. In general, increase this number if you have idle CPU time and requests that are pending; decrease it if the CPU becomes overloaded. If you have many HTTP 1.0 clients (or HTTP 1.1 clients that disconnect frequently), adjust the timeout value to reduce the time a connection is kept open.
Suitable Request Thread Count values range from 100 to 500, depending on the load. If your system has extra CPU cycles, keep incrementally increasing thread count and monitor performance after each incremental increase. When performance saturates (stops improving), then stop increasing thread count.
The Initial Thread Count property specifies the minimum number of threads the server initiates upon start-up. The default value is 2. Initial Thread Count represents a hard limit for the maximum number of active threads that can run simultaneously, which can become a bottleneck for performance.
The Request Timeout property specifies the number of seconds the server waits between accepting a connection to a client and receiving information from it. The default setting is 30 seconds. Under most circumstances, changing this setting is unnecessary. By setting it to less than the default 30 seconds, it is possible to free up threads sooner. However, disconnecting users with slower connections also helps.
The size (in bytes) of the buffer used by each of the request processing threads for reading the request data from the client.
Adjust the value based on the actual request size and observe the impact on performance. In most cases the default should suffice. If the request size is large, increase this parameter.
Both HTTP 1.0 and HTTP 1.1 support the ability to send multiple requests across a single HTTP session. A server can receive hundreds of new HTTP requests per second. If every request was allowed to keep the connection open indefinitely, the server could become overloaded with connections. On Unix/Linux systems, this could easily lead to a file table overflow.
The Application Server’s Keep Alive system addresses this problem. A waiting keep alive connection has completed processing the previous request, and is waiting for a new request to arrive on the same connection. The server maintains a counter for the maximum number of waiting keep-alive connections. If the server has more than the maximum waiting connections open when a new connection waits for a keep-alive request, the server closes the oldest connection. This algorithm limits the number of open waiting keep-alive connections.
If your system has extra CPU cycles, incrementally increase the keep alive settings and monitor performance after each increase. When performance saturates (stops improving), then stop increasing the settings.
The following HTTP keep alive settings affect performance:
Keep Alive Query Mean Time
Keep Alive Query Max Sleep Time
Max Connections controls the number of requests that a particular client can make over a keep-alive connection. The range is any positive integer, and the default is 256.
Adjust this value based on the number of requests a typical client makes in your application. For best performance specify quite a large number, allowing clients to make many requests.
The number of connections specified by Max Connections is divided equally among the keep alive threads. If Max Connections is not equally divisible by Thread Count, the server can allow slightly more than Max Connections simultaneous keep alive connections.
Time Out determines the maximum time (in seconds) that the server holds open an HTTP keep alive connection. A client can keep a connection to the server open so that multiple requests to one server can be serviced by a single network connection. Since the number of open connections that the server can handle is limited, a high number of open connections will prevent new clients from connecting.
The default time out value is 30 seconds. Thus, by default, the server will close the connection if idle for more than 30 seconds. The maximum value for this parameter is 300 seconds (5 minutes).
The proper value for this parameter depends upon how much time is expected to elapse between requests from a given client. For example, if clients are expected to make requests frequently then, set the parameter to a high value; likewise, if clients are expected to make requests rarely, then set it to a low value.
This setting specifies whether the server performs DNS (domain name service) lookups on clients that access the server. When DNS lookup is not enabled, when a client connects, the server knows the client’s IP address but not its host name (for example, it knows the client as 184.108.40.206, rather than www.xyz.com). When DS lookup is enabled, the server will resolve the client’s IP address into a host name for operations like access control, common gateway interface (CGI) programs, error reporting, and access logging.
If the server responds to many requests per day, reduce the load on the DNS or NIS (Network Information System) server by disabling DNS lookup. Enabling DNS lookup will increase the latency and load on the system—do so with caution.
The Application Server uses a file cache to serve static information faster. The file cache contains information about static files such as HTML, CSS, image, or text files. Enabling the HTTP file cache will improve performance of applications that contain static files.
Set the file cache attributes in the Admin Console under Configurations > config-name > HTTP Service (HTTP File Cache).
Max Files Count determines how many files are in the cache. If the value is too big, the server caches little-needed files, which wastes memory. If the value is too small, the benefit of caching is lost. Try different values of this attribute to find the optimal solution for specific applications—generally, the effects will not be great.
Hash Init Size affects memory use and search time, but rarely will have a measurable effect on performance.
This parameter controls how long cached information is used after a file has been cached. An entry older than the maximum age is replaced by a new entry for the same file.
If your web site’s content changes infrequently, increase this value for improved performance. Set the maximum age by entering or changing the value in the Maximum Age field of the File Cache Configuration page in the web-based Admin Console for the HTTP server node and selecting the File Caching Tab.
Set the maximum age based on whether the content is updated (existing files are modified) on a regular schedule or not. For example, if content is updated four times a day at regular intervals, you could set the maximum age to 21600 seconds (6 hours). Otherwise, consider setting the maximum age to the longest time you are willing to serve the previous version of a content file after the file has been modified.
The cache treats small, medium, and large files differently. The contents of medium files are cached by mapping the file into virtual memory (Unix/Linux platforms). The contents of small files are cached by allocating heap space and reading the file into it. The contents of large files are not cached, although information about large files is cached.
The advantage of distinguishing between small files and medium files is to avoid wasting part of many pages of virtual memory when there are lots of small files. So the Small File Size Limit is typically a slightly lower value than the VM page size.
When File Transmission is enabled, the server caches open file descriptors for files in the file cache, rather than the file contents. Also, the distinction normally made between small, medium, and large files no longer applies since only the open file descriptor is being cached.
By default, File Transmission is enabled on Windows, and disabled on UNIX. On UNIX, only enable File Transmission for platforms that have the requisite native OS support: HP-UX and AIX. Don’t enable it for other UNIX/Linux platforms.
Change HTTP listener settings in the Admin Console under Configurations > config-name > HTTP Service > HTTP Listeners > listener-name.
For machines with only one network interface card (NIC), set the network address to the IP address of the machine (for example, 220.127.116.11 instead of default 0.0.0.0). If you specify an IP address other than 0.0.0.0, the server will make one less system call per connection. Specify an IP address other than 0.0.0.0 for best possible performance. If the server has multiple NIC cards then create multiple listeners for each NIC.
The Acceptor Threads setting specifies how many threads you want in accept mode on a listen socket at any time. It is a good practice to set this to less than or equal to the number of CPUs in your system.
In the Application Server, acceptor threads on an HTTP Listener accept connections and put them onto a connection queue. Session threads then pick up connections from the queue and service the requests. The server posts more session threads if required at the end of the request.
The policy for adding new threads is based on the connection queue state:
Each time a new connection is returned, the number of connections waiting in the queue (the backlog of connections) is compared to the number of session threads already created. If it is greater than the number of threads, more threads are scheduled to be added the next time a request completes.
The previous backlog is tracked, so that n threads are added (n is the HTTP Service’s Thread Increment parameter) until one of the following is true:
The number of threads increases over time.
The increase is greater than n.
The number of session threads minus the backlog is less than n.
To avoid creating too many threads when the backlog increases suddenly (such as the startup of benchmark loads), the server makes the decision whether more threads are needed only once every 16 or 32 connections, based on how many session threads already exist.