Logical Domains 1.2 Administration Guide

ProcedureSet Options for an Existing Virtual Network Device

  1. Use the following command syntax to set options for a virtual network device that already exists.


    # ldm set-vnet [mac-addr=num] [vswitch=vswitch-name] [mode=[hybrid]] 
    [pvid=port-vlan-id] [vid=vlan-id1,vlan-id2,...] [mtu=size] if-name ldom
    

    Where:

    • mode= (left blank) disables NIU Hybrid I/O.

    • if-name, interface name, is the unique name assigned to the virtual network device you want to set.

    • ldom specifies the logical domain from which to remove the virtual network device.

    • Otherwise, the command arguments are the same as described in Add a Virtual Network Device.