Solaris 10 10/09 Release Notes

Dynamic Reconfiguration on Sun Fire Midrange Systems

This section describes major issues that are related to DR on the following Sun Fire midrange systems:

Note –

This information applies only to DR as it runs on the servers listed in this section. For information about DR on other servers, see the Release Notes or Product Notes documents or sections that describe those servers.

Minimum System Controller Firmware

Table 3–1 shows acceptable combinations of Solaris software and System Controller (SC) firmware for each Sun Fire midrange system to run DR.

Note –

To best utilize the latest firmware features and bug fixes, run the most recent SC firmware on your Sun Fire midrange system. For the latest patch information, see

Table 3–1 Minimum SC Firmware for Each Platform and Solaris Release


Solaris Release 

Minimum SC Firmware 

Sun Fire E6900/E4900 with UltraSPARC IV+ 

Solaris 10 3/05 HW1 (a limited release) or Solaris 10 1/06 


E6900/E4900 without UltraSPARC IV+ 

Solaris 9 4/04 


Sun Fire 6800/4810/4800/3800 

Solaris 9 4/04 


Sun Fire 6800/4810/4800/3800 

Solaris 9 


You can upgrade the system firmware for your Sun Fire midrange system by connecting to an FTP or HTTP server where the firmware images are stored. For more information, refer to the README and files. These files are included in the firmware releases that are running on your domains. You can download Sun patches from

Known DR Software Bugs

This section lists important DR bugs.

Network Device Removal Fails When a Program Is Holding the Device Open (5054195)

If a process is holding open a network device, any DR operation that would involve that device fails. Daemons and processes that hold reference counts stop DR operations from completing.

Workaround: As superuser, perform the following steps:

  1. Remove or rename the /rplboot directory.

  2. Shut down NFS services.

    # sh /etc/init.d/nfs.server stop
  3. Shut down Boot Server services.

    # sh /etc/init.d/boot.server stop
  4. Perform the DR detach operation.

  5. Restart NFS services.

    # sh /etc/init.d/nfs.server start
  6. Restart Boot Server services.

    # sh /etc/init.d/boot.server start