Solaris 10 10/09 Installation Guide: Network-Based Installations

ProcedureTo Perform a Noninteractive WAN Boot Installation

Use this installation method if you prefer to install keys and set client configuration information before you install the client. You can then boot the client from the WAN and perform an unattended installation.

This procedure assumes that you have either installed keys in the client's OBP, or that you are performing an insecure installation. For information about installing keys on the client before your installation, see Installing Keys on the Client.

  1. If the client system is currently running, bring the system to run level 0.

    # init 0

    The ok prompt is displayed.

  2. At the ok prompt on the client system, set the network boot argument variables in OBP.

    ok setenv network-boot-arguments  host-ip=client-IP,

    Note –

    The line breaks in this command sample are included for formatting purposes only. Do not enter a carriage return until you finish typing the command.

    setenv network-boot-arguments

    Instructs the OBP to set the following boot arguments


    Specifies the IP address of the client


    Specifies the IP address of the network router


    Specifies the subnet mask value


    Specifies the host name of the client

    (Optional) http-proxy=proxy-ip:port

    Specifies the IP address and port of the network's proxy server


    Specifies the URL of the wanboot-cgi program on the web server

  3. Boot the client.

    ok boot net - install
    net - install

    Instructs the client to use the network boot argument variables to boot from the WAN

    The client installs over the WAN. If the WAN boot programs do not find all the necessary installation information, the wanboot program prompts to provide the missing information. Type the additional information at the prompt.

Example 13–4 Noninteractive WAN Boot Installation

In the following example, the network boot argument variables for the client system myclient are set before the machine is booted. This example assumes that a hashing key and encryption key are already installed on the client. For information about installing keys before you boot from the WAN, see Installing Keys on the Client.

ok setenv network-boot-arguments host-ip=,
ok boot net - install
Resetting ...

Sun Blade 100 (UltraSPARC-IIe), No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.x.build_28, 512 MB memory installed, Serial #50335475.
Ethernet address 0:3:ba:e:f3:75, Host ID: 83000ef3.

Rebooting with command: boot net - install
Boot device: /pci@1f,0/network@c,1  File and args: - install

The following variables are set.

See Also

For more information about how to set network boot arguments, see set(1).

For more information about how to boot a system, see boot(1M).