Use this procedure to configure Sun Cluster HA for Oracle as a failover data service. This procedure assumes that you installed the data service packages during your initial Sun Cluster installation. If you did not install the Sun Cluster HA for Oracle packages as part of your initial Sun Cluster installation, go to Installing the Sun Cluster HA for Oracle Packages to install the data service packages. Otherwise, use this procedure to configure the Sun Cluster HA for Oracle.
You must have the following information to perform this procedure.
The names of the cluster nodes that master the data service.
The network resource that clients use to access the data service. Normally, you set up this IP address when you install the cluster. See the Sun Cluster Concepts Guide for Solaris OS for details about network resources.
The path to the Oracle application binaries for the resources that you plan to configure.
Become superuser on a cluster member.
Run the scrgadm command to register the resource types for the data service.
For Sun Cluster HA for Oracle, you register two resource types, SUNW.oracle_server and SUNW.oracle_listener, as follows.
# scrgadm -a -t SUNW.oracle_server # scrgadm -a -t SUNW.oracle_listener
Adds the data service resource type.
Specifies the predefined resource type name for your data service.
Create a failover resource group to hold the network and application resources.
You can optionally select the set of nodes on which the data service can run with the -h option, as follows.
# scrgadm -a -g resource-group [-h nodelist]
Specifies the name of the resource group. This name can be your choice but must be unique for resource groups within the cluster.
Specifies an optional comma-separated list of physical node names or IDs that identify potential masters. The order here determines the order in which the nodes are considered as primary during failover.
Use the -h option to specify the order of the node list. If all of the nodes that are in the cluster are potential masters, you do not need to use the -h option.
Verify that all of the network resources that you use have been added to your name service database.
You should have performed this verification during the Sun Cluster installation.
Ensure that all of the network resources are present in the server's and client's /etc/inet/hosts file to avoid any failures because of name service lookup.
Add a network resource to the failover resource group.
# scrgadm -a -L -g resource-group -l logical-hostname [-n netiflist]
Specifies a network resource. The network resource is the logical hostname or shared address (IP address) that clients use to access Sun Cluster HA for Oracle.
Specifies an optional, comma-separated list that identifies the IP Networking Multipathing groups that are on each node. Each element in netiflist must be in the form of netif@node. netif can be given as an IP Networking Multipathing group name, such as sc_ipmp0. The node can be identified by the node name or node ID, such as sc_ipmp0@1 or sc_ipmp@phys-schost-1.
Sun Cluster does not currently support the use of the adapter name for netif.
# scrgadm -a -t SUNW.HAStoragePlus
Create the resource oracle-hastp-rs of type SUNW.HAStoragePlus.
# scrgadm -a -j oracle-hastp-rs -g oracle-rg -t SUNW.HAStoragePlus \ [If your database is on a raw device, specify the global device path.] -x GlobalDevicePaths=ora-set1,/dev/global/dsk/dl \ [If your database is on a Cluster File Service, specify the global file system and local file system mount points.] -x FilesystemMountPoints=/global/ora-inst,/global/ora-data/logs,/ local/ora-data \ [Set AffinityOn to true.] -x AffinityOn=TRUE
AffinityOn must be set to TRUE and the local file system must reside on global disk groups to be failover.
Run the scswitch command to complete the following tasks and bring the resource group oracle-rg online on a cluster node.
Be sure to switch only at the resource group level. Switching at the device group level confuses the resource group, causing it to fail over.
Move the resource group into a MANAGED state.
Bring the resource group online.
This node is made the primary for device group ora-set1 and raw device /dev/global/dsk/d1. Device groups that are associated with file systems such as /global/ora-inst and /global/ora-data/logs are also made primaries on this node.
# scswitch -Z -g oracle-rg
Create Oracle application resources in the failover resource group.
Oracle server resource:
# scrgadm -a -j resource -g resource-group \ -t SUNW.oracle_server \ -x Connect_string=user/passwd \ -x ORACLE_SID=instance \ -x ORACLE_HOME=Oracle-home \ -x Alert_log_file=path-to-log \ -x Restart_type=entity-to-restart -y resource_dependencies=storageplus-resource
Oracle listener resource:
# scrgadm -a -j resource -g resource-group \ -t SUNW.oracle_listener \ -x LISTENER_NAME=listener \ -x ORACLE_HOME=Oracle-home -y resource_dependencies=storageplus-resource
Specifies the name of the resource to add.
Specifies the name of the resource group into which the resources are to be placed.
Specifies the type of the resource to add.
Sets the path under $ORACLE_HOME for the server message log.
Specifies the user and password that the fault monitor uses to connect to the database. These settings must agree with the permissions that you set up in How to Set Up Oracle Database Permissions. If you use Solaris authorization, type a slash (/) instead of the user name and password.
Sets the Oracle system identifier.
Sets the name of the Oracle listener instance. This name must match the corresponding entry in listener.ora.
Sets the path to the Oracle home directory.
Specifies the entity that the server fault monitor restarts when the response to a fault is restart. Set entity-to-restart as follows:
To specify that all resources in the resource group that contains this resource are restarted, set entity-to-restart to RESOURCE_GROUP_RESTART. By default, the resource group that contains this resource is restarted.
If you set entity-to-restart to RESOURCE_GROUP_RESTART, all other resources (such as Apache or DNS) in the resource group are restarted, even if they are not faulty. Therefore, include in the resource group only the resources that you require to be restarted when the Oracle server resource is restarted.
To specify that only this resource is restarted, set entity-to-restart to RESOURCE_RESTART.
Optionally, you can set additional extension properties that belong to the Oracle data service to override their default values. See Setting Sun Cluster HA for Oracle Extension Properties for a list of extension properties.
Enable the resource and fault monitoring.
# scswitch -Z -g resource-group
Enables the resource and monitor, moves the resource group to the MANAGED state, and brings it online.
Specifies the name of the resource group.
The following example shows how to register Sun Cluster HA for Oracle on a two-node cluster.
Cluster Information Node names: phys-schost-1, phys-schost-2 Logical Hostname: schost-1 Resource group: resource-group-1 (failover resource group) Oracle Resources: oracle-server-1, oracle-listener-1 Oracle Instances: ora-lsnr (listener), ora-srvr (server) (Add the failover resource group to contain all of the resources.) # scrgadm -a -g resource-group-1 (Add the logical hostname resource to the resource group.) # scrgadm -a -L -g resource-group-1 -l schost-1 (Register the Oracle resource types.) # scrgadm -a -t SUNW.oracle_server # scrgadm -a -t SUNW.oracle_listener (Add the Oracle application resources to the resource group.) # scrgadm -a -j oracle-server-1 -g resource-group-1 \ -t SUNW.oracle_server -x ORACLE_HOME=/global/oracle \ -x Alert_log_file=/global/oracle/message-log \ -x ORACLE_SID=ora-srvr -x Connect_string=scott/tiger # scrgadm -a -j oracle-listener-1 -g resource-group-1 \ -t SUNW.oracle_listener -x ORACLE_HOME=/global/oracle \ -x LISTENER_NAME=ora-lsnr (Bring the resource group online.) # scswitch -Z -g resource-group-1