| Skip Navigation Links | |
| Exit Print View | |
|
Sun Fire X4640 Server Service Manual Sun Fire X4640 Server Documentation Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Fire X4640 Server Service Manual Sun Fire X4640 Server Documentation Library |
About This Documentation (PDF and HTML)
Sun Fire X4640 Server Service Manual Overview
Controlling Power and Performing Hardware Reset
Powering the Server On and Off
Controlling Server Power Remotely
How to Use the ILOM Command-Line Interface (CLI) to Control Power
How to Use IPMItool to Control Power
Resetting the Server Using the Reset Switch (SW2)
How to Reset the Server Using the Reset Switch (SW2)
Removing and Installing Components
Antistatic Procedures and Precautions
Tools Required for Servicing the Sun Fire X4640 Server
Preparing the Server for Service and Operation
Removal and Replacement Procedures
List of Customer Replaceable Units and Field Replaceable Units
Replacing the CMOS Battery (CRU)
Replacing or Adding a Hard Drive (CRU)
Replacing a CPU Module and Filler Card (CRU)
Replacing or Adding DIMMs (CRU)
Replacing or Adding PCI Cards (CRU)
Replacing or Adding a Power Supply (CRU)
Replacing the Service Processor Board (FRU)
Replacing the DVD Module (FRU)
Replacing the Power Distribution Board (FRU)
Replacing the Fan Tray Carriage (FRU)
Replacing the Front Panel Indicator Board (FRU)
Replacing the Front I/O Board (FRU)
Replacing a Hard Disk Backplane (FRU)
Replacing the Motherboard (FRU)
Updating Field-Replaceable Unit Information
How to Update the Server CPLDs
Configuring the System Using the BIOS Setup Utilities
BIOS and the BIOS Setup Utility
How to Configure the System BIOS
BIOS and Service Processor Updates
LSI BIOS Configuration Utility
Sun Fire X4640 Server References and Specifications
Sun Fire X4640 Server Features and Components
Sun Fire X4640 Server Front and Back Panel Features and Components
Sun Fire X4640 Server Specifications
Sun Fire X4640 Server Motherboard Jumpers and Switches
Sun Fire X4640 Server External LED Locations and Meanings
You can use the ILOM web interface to remotely change the power state of the server. For example, you can perform the following power-related actions:
Power on the server.
Shut down the OS gracefully and power off to standby power mode.
Perform an immediate power off to standby power mode without shutting down the OS gracefully.
Reboot the server by cycling the power.
Note - For information about the ILOM web interface, see Sun Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide.
To connect to the ILOM web interface, see How to Connect to the ILOM Web Interface in Sun ILOM 3.0 Supplement for the Sun Fire X4640 Server
When you are logged in the ILOM web interface main screen appears.
The Server Power control screen appears. From the Server Power Control screen, you can remotely control the power state of a host server by selecting one of the power-related actions from the Action menu.
|