Skip Navigation Links | |
Exit Print View | |
Sun Fire X4640 Server Linux Installation Guide Sun Fire X4640 Server Documentation Library |
About This Documentation (PDF and HTML)
Introduction to Linux Installation
Sun Installation Assistant (SIA)
Installing Red Hat Enterprise Linux
Overview of Red Hat Enterprise Linux Installation
Installing RHEL From Distribution Media
Installing and Updating SUSE Linux Enterprise Server
Introduction to Installing SLES From Distribution Media
How to Install SLES From Distribution Media
Configuring a Linux Server to Support PXE Installation
How to Copy Files from the Tools and Drivers CD
How to Install and Configure a DHCP Server
How to Install Portmap on Your DHCP Server
How to Configure the TFTP Service on Your DHCP Server
How to Install and Configure the neopxe Boot Server Daemon
How to Configure the NFS Service on Your PXE Server
How to Create a PXE Installation Image for Red Hat Linux
Creating a PXE Image for SUSE Linux
How to Install RHEL and SUSE Linux From a PXE Server
Booting From OS Distribution Media
How to Boot From OS Media Locally
How to Boot From OS Distribution Media or ISO File Remotely
Preliminary Tasks Before Installing An OS
Accessing the Server Output During Installation
How to Erase Your Boot Hard Disk
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
SUSE Linux - How to Identify Logical and Physical Network Interface Names While Installing the OS
RHEL - How to Identify Logical and Physical Network Interface Names While Installing the OS
Use the following terminal settings:
8,n,1: eight data bits, no parity, one stop bit
9600 baud rate
Disable software flow control (XON/XOFF)
Console output appears on the serial port.
If the output does not appear, it might be necessary to configure the output in the BIOS. Use the following step to configure the output in the BIOS.
The left and right arrow keys allow you to access the BIOS Setup Utility menu tabs.
The Configure Remote Access type and parameters submenu screen appears.