The following tasks must be performed on all nodes in the cluster.
Verifying that the hardware is connected correctly for the cluster
Checking the installation sequence guidelines
Check to see what guidelines apply to this example and make adjustments as needed.
Checking the installation prerequisites
Check to see what tasks you might need to perform for this installation before starting.
Running the installer
On Solaris 10, Sun Cluster software can only be installed in the global zone.
At component selection, choosing only the Sun Cluster product component
During a Configure Now installation (usually where you have chosen to install all product components), you are prompted whether to enable support for remote Sun Cluster configuration. If you select Yes, postinstallation configuration for Sun Cluster software will be easier.
Selecting the Configure Later type
Refer to the Sun Cluster Software Installation Guide for Solaris OS for further information.
Following the instructions to configure the Sun Cluster Framework for each host in the cluster
Follow instructions in Chapter 2, Installing Software on the Cluster, in Sun Cluster Software Installation Guide for Solaris OS. When the Sun Cluster documentation refers to a Sun Cluster CD-ROM, substitute the name of the equivalent Communications Suite CD-ROM.
For documentation on creating resource groups and configuring data services, refer to the Sun Cluster Data Services Planning and Administration Guide for Solaris OS.