You do not need to be superuser to list the quorum configuration. You can assume any role that provides solaris.cluster.read RBAC authorization.
When you increase or decrease the number of node attachments to a quorum device, the quorum vote count is not automatically recalculated. You can reestablish the correct quorum vote if you remove all quorum devices and then add them back into the configuration. For a two-node cluster, temporarily add a new quorum device before you remove and add back the original quorum device. Then remove the temporary quorum device.
The phys-schost# prompt reflects a global-cluster prompt. Perform this procedure on a global cluster.
This procedure provides the long forms of the Sun Cluster commands. Most commands also have short forms. Except for the long and short forms of the command names, the commands are identical. For a list of the commands and their short forms, see Appendix B, Sun Cluster Object-Oriented Commands.
Use clquorum(1CL) to list the quorum configuration.
% clquorum show +
% clquorum show + === Cluster Nodes === Node Name: phys-schost-2 Node ID: 1 Quorum Vote Count: 1 Reservation Key: 0x43BAC41300000001 Node Name: phys-schost-3 Node ID: 2 Quorum Vote Count: 1 Reservation Key: 0x43BAC41300000002 === Quorum Devices === Quorum Device Name: d3 Enabled: yes Votes: 1 Global Name: /dev/did/rdsk/d20s2 Type: shared_disk Access Mode: scsi2 Hosts (enabled): phys-schost-2, phys-schost-3