Files for Configuring Sun Cluster HA for Solaris Zones Resources
The /opt/SUNWsczone/zone component/util directory contains files that automate the process of configuring Sun Cluster HA for Solaris Zones resources. Listings of these files are provided in the following sections:
Listing of sczbt_config
#
# Copyright 2008 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# ident "@(#)sczbt_config 1.5 08/04/17 SMI"
#
# This file will be sourced in by sczbt_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
# RS - Name of the resource
# RG - Name of the resource group containing RS
# PARAMETERDIR - Name of the parameter file direcrory
# SC_NETWORK - Identfies if SUNW.LogicalHostname will be used
# true = zone will use SUNW.LogicalHostname
# false = zone will use it's own configuration
#
# NOTE: If the ip-type keyword for the non-global zone is set
# to "exclusive", only "false" is allowed for SC_NETWORK
#
# The configuration of a zone's network addresses depends on
# whether you require IPMP protection or protection against
# the failure of all physical interfaces.
#
# If you require only IPMP protection, configure the zone's
# addresses by using the zonecfg utility and then place the
# zone's address in an IPMP group.
#
# To configure this option set
# SC_NETWORK=false
# SC_LH=Name of the SC Logical Hostname resource
#
# If IPMP protection is not required, just configure the
# zone's addresses by using the zonecfg utility.
#
# To configure this option set
# SC_NETWORK=false
# SC_LH=Name of the SC Logical Hostname resource
#
# If you require protection against the failure of all physical
# interfaces, choose one option from the following list.
#
# - If you want the SUNW.LogicalHostName resource type to manage
# the zone's addresses, configure a SUNW.LogicalHostName
# resource with at least one of the zone's addresses.
#
# To configure this option set
# SC_NETWORK=true
# SC_LH=Name of the SC Logical Hostname resource
#
# - Otherwise, configure the zone's addresses by using the
# zonecfg utility and configure a redundant IP address
# for use by a SUNW.LogicalHostName resource.
#
# To configure this option set
# SC_NETWORK=false
# SC_LH=Name of the SC Logical Hostname resource
#
# Whichever option is chosen, multiple zone addresses can be
# used either in the zone's configuration or using several
# SUNW.LogicalHostname resources.
#
# e.g. SC_NETWORK=true
# SC_LH=zone1-lh1,zone1-lh2
#
# SC_LH - Name of the SC Logical Hostname resource
# FAILOVER - Identifies if the zone's zone path is on a
# highly available local file system
#
# e.g. FAILOVER=true - highly available local file system
# FAILOVER=false - local file system
#
# HAS_RS - Name of the HAStoragePlus SC resource
#
RS=
RG=
PARAMETERDIR=
SC_NETWORK=
SC_LH=
FAILOVER=
HAS_RS=
#
# The following variable will be placed in the parameter file
#
# Parameters for sczbt (Zone Boot)
#
# Zonename Name of the zone
# Zonebrand Brand of the zone. Current supported options are
# "native" (default), "lx", "solaris8" or "solaris9"
# Zonebootopt Zone boot options ("-s" requires that Milestone=single-user)
# Milestone SMF Milestone which needs to be online before the zone is
# considered booted. This option is only used for the
# "native" Zonebrand.
# LXrunlevel Runlevel which needs to get reached before the zone is
# considered booted. This option is only used for the "lx"
# Zonebrand.
# SLrunlevel Solaris legacy runlevel which needs to get reached before the
# zone is considered booted. This option is only used for the
# "solaris8" or "solaris9" Zonebrand.
# Mounts Mounts is a list of directories and their mount options,
# which are loopback mounted from the global zone into the
# newly booted zone. The mountpoint in the local zone can
# be different to the mountpoint from the global zone.
#
# The Mounts parameter format is as follows,
#
# Mounts="/global zone directory:/local zone directory:mount options"
#
# The following are valid examples for the "Mounts" variable
#
# Mounts="/globalzone-dir1:/localzone-dir1:rw"
# Mounts="/globalzone-dir1:/localzone-dir1:rw /globalzone-dir2:rw"
#
# The only required entry is the /global zone directory, the
# /local zone directory and mount options can be omitted.
#
# Omitting /local zone directory will make the local zone
# mountpoint the same as the global zone directory.
#
# Omitting mount options will not provide any mount options
# except the default options from the mount command.
#
# Note: You must manually create any local zone mountpoint
# directories that will be used within the Mounts variable,
# before registering this resource within Sun Cluster.
#
Zonename=""
Zonebrand="native"
Zonebootopt=""
Milestone="multi-user-server"
LXrunlevel="3"
SLrunlevel="3"
Mounts=""
Listing of sczsh_config
# # Copyright 2006 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # ident "@(#)sczsh_config 1.1 06/02/22 SMI" # # This file will be sourced by sczsh_register and the parameters # listed below will be used. # # These parameters can be customized in (key=value) form # # RS - Name of the resource # RG - Name of the resource group containing RS # SCZBT_RS - Name of the SC Zone boot resource # PARAMETERDIR - Name of the parameter file directory # Zonename - Name of the zone # ServiceStartCommand - Command including all options to start # the service in the configured zone # ServiceStopCommand - Command including all options to stop # the service in the configured zone # ServiceProbeCommand - Command including all options to probe # the service in the configured zone # RS="" RG="" SCZBT_RS="" PARAMETERDIR="" # # The following parameters will be put in the agents parameterfile: # Zonename="" ServiceStartCommand="" ServiceStopCommand="" ServiceProbeCommand=""
Listing of sczsmf_config
#
# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# ident "@(#)sczsmf_config 1.1 06/02/22 SMI"
#
# This file will be sourced in by sczsmf_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
# RS - Name of the resource
# RG - Name of the resource group containing RS
# SCZBT_RS - Name of the SC Zone boot resource
# ZONE - Name of the Zone
#
# For SERVICE, RECURSIVE and STATE, refer to the svcadm(1M)
# man page
#
# SERVICE - {FMRI | pattern}
# FMRI - Fault management resource identifier
# pattern - Pattern matching a service
#
# RECURSIVE - {false | true} Default: true
# False - Just enable the service and no dependents
# True - Enable the service and recursively enable
# its dependents
#
# RECURSIVE=true equates to svcadm enable "-r"
#
# STATE - {false | true} Default: true
# False - Do not wait until service state is reached
# True - Wait until service state is reached
#
# STATE=true equates to svcadm enable/disable "-s"
#
# SERVICE_PROBE - Script to check the SMF service
#
# The optional parameter, SERVICE_PROBE, provides the
# ability to check that the SMF service is working.
# This must be a script within the zone and must
# adhere to these return codes,
#
# 0 - The SMF service is working
# 100 - The SMF service should be restarted
# 201 - The SMF service should initiate a failover of
# the Resource Group
#
# Note: That return code 201, requires that this resource
# has an appropriate extension property value for
# FAILOVER_MODE and FAILOVER_ENABLED=TRUE
#
# For FAILOVER_MODE refer to the r_properties(5) man page.
#
RS=
RG=
SCZBT_RS=
ZONE=
SERVICE=
RECURSIVE=true
STATE=true
SERVICE_PROBE=""
- © 2010, Oracle Corporation and/or its affiliates