Sun StorageTek 6140 Array Release 2.0 Getting Started Guide
Release 2.0 Installation and Configuration
819-5045-11
Contents |
Monitoring and Diagnostic Software
Overview of the Installation Process
Preparing for the Installation
Preparing the Universal Rail Kit
Unpacking the Universal Rail Kit
Required Hardware by Cabinet/Rack Type
Loosening the Rail Adjustment Screws
Planning the Order of the Tray Installation
Attaching the Rails to a Cabinet
Attaching the Universal Rail Kit to a Standard Sun or 19-Inch Cabinet With Threaded Cabinet Rails
Attaching the Universal Rail Kit to a Sun StorEdge Expansion or Sun Fire Cabinet
Attaching the Universal Rail Kit to a Standard 19-Inch Cabinet With Unthreaded Cabinet Rails
Installing a Tray in a Cabinet
Array Configuration Naming Convention
Cabling a 1x2 Array Configuration
Cabling a 1x3 Array Configuration
Cabling a 1x4 Array Configuration
Cabling a 1x5 Array Configuration
Cabling a 1x6 Array Configuration
Cabling a 1x7 Array Configuration
3. Setting the Link Rate for Each Tray and Powering On the Array
Setting the Link Rate for Each Tray
Checking the Link Rate for Each Port
4. Connecting the Management Host and Data Hosts
Connecting the Management Host
Attaching the Ethernet Ports to the LAN of the Management Host
Attaching the Ethernet Ports to the LAN Using an Ethernet Hub
Attaching the Ethernet Ports Directly to the Management Host With a Cross-Over Cable
Connecting Data Hosts Through External Fibre Channel Switches
Connecting Data Hosts Directly
5. Installing Management and Data Host Software on Solaris OS Hosts
About the Software Installation CD
Unpacking the Installation File
Using the Host Software Installer
Setting Up a Local Management Host
Launching the Software Installer
Installing the Local Management Host Software
Enabling Multipathing Software
Completing Post-Installation Tasks
Preparing to Set Up a Data Host
Launching the Software Installer
Installing the Data Host Software
Configuring the Data Host Agent
Setting Up a Remote Management Host
Preparing to Set Up a Remote Management Host
Launching the Software Installer
Installing the Remote Management Host Software
Using the Array Firmware Upgrade Installer
Configuring the IP Address of the Array Controllers
Configuring Dynamic (DHCP) IP Addressing
Configuring Static IP Addressing
Using the Serial Port Interface to Assign IP Addresses
Using the Sun StorageTek Configuration Service to Assign IP Addresses
Configuring the IP Address of the Management Host
Configuring the IP Address on the Management Host for the Solaris Operating System
Configuring the IP Address for Windows 2000 Advanced Server
Configuring the IP Address for Windows Server 2003
Creating and Deleting a Temporary Virtual Subnet on a Management Host
Creating a Temporary Virtual Subnet on a Management Host
Deleting a Temporary Virtual Subnet on a Management Host
7. Using the Management Software and Setting Up the Array
Starting the Management Software
Logging In and Out Using the CLI
Logging In Using the Browser Interface
Using the Browser Interface to Set Up the Array
Accessing the Sun StorageTek Configuration Service
Navigating the Sun StorageTek Configuration Service
Setting Up the Sun Storage Automated Diagnostic Environment
8. Installing Data Host and Remote Management Software on Hosts Not Running the Solaris OS
Installing Remote Management Host Software for Operating Systems Other Than Solaris
About the Remote Management Host Software
Installing the Windows Remote CLI Client
Installing the Red Hat Linux, HP-UX, and AIX Remote CLI Client
Installing Data Host Software for Operating Systems Other Than Solaris
9. Planning Your Storage Configuration
Storage Array Configuration Components
Partitioning Storage Using Storage Domains
Storage Configuration Considerations
Allocating Storage to Data Hosts
Configuring Storage on the Array
Creating Hosts and Host Groups
Creating a Volume and Mapping It to a Host or Host Group
Setting Up a Solaris DHCP Server
Setting Up a Windows 2000 Advanced Server
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.