The following example shows the scinstall command executed and the messages that the utility logs as scinstall completes configuration tasks on the node phys-schost-3. The sponsoring node is phys-schost-1.
>>> Confirmation <<< Your responses indicate the following options to scinstall: scinstall -ik \ -C sc-cluster \ -N phys-schost-1 \ -A trtype=dlpi,name=hme1 -A trtype=dlpi,name=hme3 \ -m endpoint=:hme1,endpoint=switch1 \ -m endpoint=:hme3,endpoint=switch2 Are these the options you want to use (yes/no) [yes]? Do you want to continue with the install (yes/no) [yes]? Checking device to use for global devices file system ... done Adding node "phys-schost-3" to the cluster configuration ... done Adding adapter "hme1" to the cluster configuration ... done Adding adapter "hme3" to the cluster configuration ... done Adding cable to the cluster configuration ... done Adding cable to the cluster configuration ... done Copying the config from "phys-schost-1" ... done Setting the node ID for "phys-schost-3" ... done (id=3) Verifying the major number for the "did" driver with "phys-schost-1" ...done Checking for global devices global file system ... done Updating vfstab ... done Verifying that NTP is configured ... done Installing a default NTP configuration ... done Please complete the NTP configuration after scinstall has finished. Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done Adding the "cluster" switch to "hosts" in nsswitch.conf ... done Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done Verifying that power management is NOT configured ... done Unconfiguring power management ... done /etc/power.conf has been renamed to /etc/power.conf.61501001054 Power management is incompatible with the HA goals of the cluster. Please do not attempt to re-configure power management. Ensure that the EEPROM parameter "local-mac-address?" is set to "true" ...done Ensure network routing is disabled ... done Network routing has been disabled on this node by creating /etc/notrouter. Having a cluster node act as a router is not supported by Sun Cluster. Please do not re-enable network routing. Log file - /var/cluster/logs/install/scinstall.log.9853 Rebooting ...