The following example shows creation of mirror d4 to mirror /export, which resides on c0t0d0s4. Mirror d4 consists of submirror d14 on partition c0t0d0s4 and submirror d24 on partition c2t2d0s4. The /etc/vfstab file entry for /export is updated to use the mirror name d4. Device c2t2d0 is a multihost disk, so the localonly property is enabled.
(Unmount the file system) # umount /export (Create the mirror) # metainit -f d14 1 1 c0t0d0s4 d14: Concat/Stripe is setup # metainit d24 1 1 c2t2d0s4 d24: Concat/Stripe is setup # metainit d4 -m d14 d4: Mirror is setup (Edit the /etc/vfstab file) # vi /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # /dev/md/dsk/d4 /dev/md/rdsk/d4 /export ufs 2 no global (Attach the second submirror) # metattach d4 d24 d4: Submirror d24 is attached (View the sync status) # metastat d4 d4: Mirror Submirror 0: d14 State: Okay Submirror 1: d24 State: Resyncing Resync in progress: 15 % done … (Identify the device-ID name of the mirrored disk's raw-disk device group) # scdidadm -L … 1 phys-schost-3:/dev/rdsk/c2t2d0 /dev/did/rdsk/d2 (Display the device-group node list) # scconf -pvv | grep dsk/d2 Device group name: dsk/d2 … (dsk/d2) Device group node list: phys-schost-1, phys-schost-3 … (Remove phys-schost-3 from the node list) # scconf -r -D name=dsk/d2,nodelist=phys-schost-3 (Enable the localonly property) # scconf -c -D name=dsk/d2,localonly=true (Mount the file system) # mount /export