Add this planning information to the Public Networks Worksheet.
Internet Protocol (IP) Network Multipathing groups, which replace Network Adapter Failover (NAFO) groups, provide public-network adapter monitoring and failover, and are the foundation for a network-address resource. A multipathing group provides high availability when the multipathing group is configured with two or more adapters. If one adapter fails, all of the addresses on the failed adapter fail over to another adapter in the multipathing group. In this way, the multipathing-group adapters maintain public-network connectivity to the subnet to which the adapters in the multipathing group connect.
Each public network adapter must belong to a multipathing group.
For multipathing groups that contain two or more adapters, you must configure a test IP address for each adapter in the group. If a multipathing group contains only one adapter, you do not need to configure a test IP address.
Test IP addresses for all adapters in the same multipathing group must belong to a single IP subnet.
Test IP addresses must not be used by normal applications because the test IP addresses are not highly available.
In the /etc/default/mpathd file, the value of TRACK_INTERFACES_ONLY_WITH_GROUPS must be yes.
The name of a multipathing group has no requirements or restrictions.
Most procedures, guidelines, and restrictions that are identified in the Solaris documentation for IP Network Multipathing are the same for both cluster and noncluster environments. Therefore, see the appropriate Solaris document for additional information about IP Network Multipathing:
For the Solaris 8 OS, see “Deploying Network Multipathing” in IP Network Multipathing Administration Guide.
For the Solaris 9 OS, see “Administering Network Multipathing (Task)” in System Administration Guide: IP Services.