| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade Storage Module M2 Administration Guide |
About This Documentation (PDF and HTML)
SAS Device Access to the Chassis SAS-2 Domain
Host Access to Storage Module Resources Using the Sun Blade Zone Manager
How to Assign Storage to Hosts Using the CMM ILOM Web Interface
How to Assign Storage to Hosts Using the CMM ILOM CLI
Overview of Storage Module Management
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Management Options Using the Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z)
Performing Maintenance and Hot Plug Actions
Preparing for Hot Plug Actions
Recovering Zoning Configurations
Upgrading Storage Module Firmware
Importing Existing Virtual Drives to a Replacement REM
Replacing a REM on a SPARC System
Replacing a REM on an x86 System
Storage Module Sensors and Indicators
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
All sensors for the storage module are located under the CMM namespace in the CMM ILOM web interface.
To display the sensors using the CMM ILOM, select CMM from the left pane and then select the System Monitoring tab. Sub-tabs for sensors, indicators and events are available. To display information for a specific storage module, the identifier BLx refers to the blade slot in the chassis in which the storage module is installed.
Click on an item for more information, or select the radio button (if available) and use the —Action— drop-down menu for supported actions.
|