| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade Storage Module M2 Product Documentation |
About This Documentation (PDF and HTML)
Overview of the Sun Blade Storage Module M2
Installing the Storage Module Into the Chassis
Assigning and Managing Storage
Overview of the Sun Blade Storage Module M2 Product Notes
Supported Firmware, Hardware and Software
Solaris Operating System Issues
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Management Options Using the Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z)
Performing Maintenance and Hot Plug Actions
Importing Existing Virtual Drives to a Replacement REM
Storage Module Sensors and Indicators
Introduction to the Sun Blade Storage Module M2
Maintaining the Sun Blade Storage Module M2
Your Sun Blade Storage Module M2 supports a powerful set of enclosure management features accessible from the CMM or a management client that supports SES-2 (SCSI Enclosure Services) and SMP (Serial Management Protocol). Some or all of these features are available through supported management software, such as the Sun Blade Zone Manager feature of the CMM, or the LSI MegaRAID Storage Manager software. These features provide a system administrator the following capabilities:
Monitor the storage module status (on/off line status, component health)
Be alerted to a change in state of the storage module environment (voltage and temperature)
Identify and locate storage module components
Obtain Field Replaceable Unit (FRU) identification and status of hard disks
Prepare hard disks for removal
Reset the storage module
Upgrade storage module expander firmware
Receive event alerts and view event logs to aid in troubleshooting
|