System Administration Guide, Volume 1

Displaying Device Configuration Information

Three commands are used to display system and device configuration information:

prtconf(1M)	Displays system configuration information, including total amount of memory and the device configuration as described by the system's device hierarchy. The output displayed by this command depends upon the type of system.
sysdef(1M)	Displays device configuration information including system hardware, pseudo devices, loadable modules, and selected kernel parameters.
dmesg(1M)	Displays system diagnostic messages as well as a list of devices attached to the system since the last reboot.

See "Device Naming Conventions" for information on the device names used to identify devices on the system.

`driver not attached` Message

The following driver-related message might be displayed by the prtconf and sysdef commands:

device, instance #number (driver not attached)

This message does not always mean that a driver is unavailable for this device. It means that no driver is currently attached to the device instance because there is no device at this node or the device is not in use. Drivers are loaded automatically when the device is accessed and unloaded when the device is not in use.

Identifying a System's Devices

Use the output of prtconf and sysdef commands to identify which disk, tape, and CD-ROM devices are connected to the system. The output of these commands display the driver not attached messages next to the device instances. Since these devices are always being monitored by some system process, the driver not attached message is usually a good indication that there is no device at that device instance.

For example, the following prtconf output identifies a device at instance #3 and instance #6, which is probably a disk device at target 3 and a CD-ROM device at target 6 of the first SCSI host adapter (esp, instance #0).

$ /usr/sbin/prtconf
.
.
.
 
esp, instance #0
            sd (driver not attached)
            st (driver not attached)
            sd, instance #0 (driver not attached)
            sd, instance #1 (driver not attached)
            sd, instance #2 (driver not attached)
            sd, instance #3
            sd, instance #4 (driver not attached)
            sd, instance #5 (driver not attached)
            sd, instance #6
.
.
.

The same device information can be gleaned from the sysdef output.

How to Display System Configuration Information

Use the prtconf command to display system configuration information.

# /usr/sbin/prtconf

Use the sysdef command to display system configuration information including pseudo devices, loadable modules, and selected kernel parameters.

# /usr/sbin/sysdef

Examples--Displaying System Configuration Information

The following prtconf output is displayed on a SPARC based system.

# prtconf
System Configuration:  Sun Microsystems  sun4u
Memory size: 128 Megabytes
System Peripherals (Software Nodes):
SUNW,Ultra-5_10
    packages (driver not attached)
        terminal-emulator (driver not attached)
        deblocker (driver not attached)
        obp-tftp (driver not attached)
        disk-label (driver not attached)
        SUNW,builtin-drivers (driver not attached)
        sun-keyboard (driver not attached)
        ufs-file-system (driver not attached)
    chosen (driver not attached)
    openprom (driver not attached)
        client-services (driver not attached)
    options, instance #0
    aliases (driver not attached)
    memory (driver not attached)
    virtual-memory (driver not attached)
    pci, instance #0
        pci, instance #0
            ebus, instance #0
                auxio (driver not attached)
                power, instance #0
                SUNW,pll (driver not attached)
                se, instance #0
                su, instance #0
                su, instance #1
                ecpp (driver not attached)
                fdthree, instance #0
.
.
.

The following sysdef output is displayed from an IA based system.

# sysdef
* Hostid
*
  29f10b4d
*
* i86pc Configuration
*
*
* Devices
*
+boot (driver not attached)
memory (driver not attached)
aliases (driver not attached)
chosen (driver not attached)
i86pc-memory (driver not attached)
i86pc-mmu (driver not attached)
openprom (driver not attached)
options, instance #0
packages (driver not attached)
delayed-writes (driver not attached)
itu-props (driver not attached)
isa, instance #0
	motherboard (driver not attached)
	pnpADP,1542, instance #0
	asy, instance #0
	asy, instance #1
	lp, instance #0 (driver not attached)
	fdc, instance #0
		fd, instance #0
		fd, instance #1 (driver not attached)
	kd (driver not attached)
	kdmouse (driver not attached)
.
.
.

How to Display Device Information

Display device information with the dmesg command.

# /usr/sbin/dmesg

The dmesg output is displayed as messages on the system console and identifies which devices are connected to the system since the last reboot.

Examples--Displaying Device Information

The following dmesg output is displayed from a SPARC based system.

# dmesg
date starbug genunix: [ID 540533 kern.notice] SunOS Release 5.8 Generic 64-bit
date starbug genunix: [ID 223299 kern.notice] Copyright (c) 1983-2000 by S
un Microsystems, Inc.
date starbug genunix: [ID 678236 kern.info] Ethernet address = 8:0:20:a6:d
4:5b
date starbug genunix: [ID 897550 kern.info] Using default device instance 
data
date starbug unix: [ID 389951 kern.info] mem = 131072K (0x8000000)
date starbug unix: [ID 930857 kern.info] avail mem = 121724928
date starbug rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 5/10 UP
A/PCI (UltraSPARC-IIi 333MHz)
.
.
.
#

The following dmesg output is displayed from an IA based system.

# dmesg
date naboo genunix: [ID 540533 kern.notice] SunOS Release 5.8 Version Generic 32-bit
date naboo genunix: [ID 223299 kern.notice] Copyright (c) 1983-2000 by Sun Microsystems, Inc.
date naboo genunix: [ID 897550 kern.info] Using default device instance data
date naboo unix: [ID 168242 kern.info] mem = 32380K (0x1f9f000)
date naboo unix: [ID 930857 kern.info] avail mem = 19390464
date naboo rootnex: [ID 466748 kern.info] root nexus = i86pc
date naboo rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
date naboo genunix: [ID 936769 kern.info] pci0 is /pci@0,0
date naboo genunix: [ID 678236 kern.info] Ethernet address = 00:a0:24:89:b0:72
date naboo gld: [ID 944156 kern.info] elx0: 3COM EtherLink III: 
type "ether" mac address 00:a0:24:89:b0:72
date naboo pci: [ID 370704 kern.info] PCI-device: pci10b7,5950@c, elx0
date naboo genunix: [ID 936769 kern.info] elx0 is /pci@0,0/pci10b7,5950@c
.
.
.