volrmmount(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OPERANDS | EXAMPLES | FILES | ATTRIBUTES | SEE ALSO | NOTES

NAME

volrmmount- call rmmount to mount or unmount media

SYNOPSIS

volrmmount [-i| -e] [name| nickname]
volrmmount [-d]

DESCRIPTION

volrmmount calls rmmount(1M) to, in effect, simulate an insertion (-i) or an ejection (-e). Simulating an insertion often means that rmmount will mount the media. Conversely, simulating an ejection often means that rmmount will unmount the media. However, these actions can vary depending on the rmmount configuration and media type (see rmmount.conf(4)).

For example, if you use the default /etc/rmmount.conf and insert a music CD, it won't be mounted. However, you can configure rmmount so that it calls workman whenever a music CD is inserted.

This command allows you to override Volume Management's usual handling of media (see EXAMPLES below).

OPTIONS

-i

Simulate an insertion of the specified media by calling rmmount.

-e

Simulate an ejection of the specified media by calling rmmount.

-d

Display the name of the default device for volrmmount to handle. This device is used if no name or nickname is supplied.

OPERANDS

name

The name that Volume Management recognizes as the device's name, see volfs(7FS).

nickname

A shortened version of the device's name. Following is the list of recognized nicknames:

Nickname	Path
fd	/dev/rdiskette
fd0	/dev/rdiskette
fd1	/dev/rdiskette1
diskette	/dev/rdiskette
diskette0	/dev/rdiskette0
diskette1	/dev/rdiskette1
rdiskette	/dev/rdiskette
rdiskette0	/dev/rdiskette0
rdiskette1	/dev/rdiskette1
floppy	/dev/rdiskette
floppy0	/dev/rdiskette0
floppy1	/dev/rdiskette1

EXAMPLES

---

Example 1 A sample case of volrmmount command.




When Volume Management finds a floppy that contains a filesystem, it calls rmmount to mount it. If you wish to run tar(1) or cpio(1) on that floppy, it must first be unmounted. To unmount the floppy use:

example% volrmmount -e floppy0

After volrmmount unmounts the floppy, if you wish to re-mount it (rather than ejecting it and reinserting it) use:

example% volrmmount -i floppy0

Note that if you are using a named floppy you can use its name in place of floppy0.

---

FILES

/dev/volctl

Volume Management control port

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SUNWvolu

SEE ALSO

cpio(1), eject(1), tar(1), rmmount(1M), vold(1M), rmmount.conf(4), attributes(5), volfs(7FS)

NOTES

Volume Management (vold) must be running to use this command.

SunOS 5.8  Last Revised 4 Mar 1996

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OPERANDS | EXAMPLES | FILES | ATTRIBUTES | SEE ALSO | NOTES