dd(1M)

NAME | SYNOPSIS | DESCRIPTION | OPERANDS | USAGE | EXAMPLES | ENVIRONMENT VARIABLES | EXIT STATUS | ATTRIBUTES | SEE ALSO | DIAGNOSTICS | NOTES

NAME

dd- convert and copy a file

SYNOPSIS

/usr/bin/dd [operand=value...]

DESCRIPTION

dd copies the specified input file to the specified output with possible conversions. The standard input and output are used by default. The input and output block sizes may be specified to take advantage of raw physical I/O. Sizes are specified in bytes; a number may end with k, b, or w to specify multiplication by 1024, 512, or 2, respectively. Numbers may also be separated by x to indicate multiplication.

dd will read the input one block at a time, using the specified input block size; it then will process the block of data actually returned, which could be smaller than the requested block size. dd will apply any conversions that have been specified and write the resulting data to the output in blocks of the specified output block size.

cbs is used only if ascii, asciib, unblock, ebcdic, ebcdicb, ibm, ibmb, or block conversion is specified. In the first two cases, cbs characters are copied into the conversion buffer, any specified character mapping is done, trailing blanks are trimmed, and a NEWLINE is added before sending the line to output. In the last three cases, characters up to NEWLINE are read into the conversion buffer and blanks are added to make up an output record of size cbs. ASCII files are presumed to contain NEWLINE characters. If cbs is unspecified or 0, the ascii, asciib, ebcdic, ebcdicb, ibm, and ibmb options convert the character set without changing the input file's block structure; the unblock and block options become a simple file copy.

After completion, dd reports the number of whole and partial input and output blocks.

OPERANDS

The following operands are supported:

if=file

Specify the input path; standard input is the default.

of=file

Specify the output path; standard output is the default. If the seek=expr conversion is not also specified, the output file will be truncated before the copy begins, unless conv=notrunc is specified. If seek=expr is specified, but conv=notrunc is not, the effect of the copy will be to preserve the blocks in the output file over which dd seeks, but no other portion of the output file will be preserved. (If the size of the seek plus the size of the input file is less than the previous size of the output file, the output file will be shortened by the copy.)

ibs=n

Specify the input block size in n bytes (default is 512).

obs=n

Specify the output block size in n bytes (default is 512).

bs=n

Set both input and output block sizes to n bytes, superseding ibs= and obs=. If no conversion other than sync, noerror, and notrunc is specified, each input block will be copied to the output as a single block without aggregating short blocks.

cbs=n

Specify the conversion block size for block and unblock in bytes by n (default is 0). If cbs= is omitted or given a value of 0, using block or unblock produces unspecified results.

This option is used only if ASCII or EBCDIC conversion is specified. For the ascii and asciib operands, the input is handled as described for the unblock operand except that characters are converted to ASCII before the trailing SPACE characters are deleted. For the ebcdic, ebcdicb, ibm, and ibmb operands, the input is handled as described for the block operand except that the characters are converted to EBCDIC or IBM EBCDIC after the trailing SPACE characters are added.

files=n

Copy and concatenate n input files before terminating (makes sense only where input is a magnetic tape or similar device).

skip=n

Skip n input blocks (using the specified input block size) before starting to copy. On seekable files, the implementation will read the blocks or seek past them; on non-seekable files, the blocks will be read and the data will be discarded.

iseek=n

Seek n blocks from beginning of input file before copying (appropriate for disk files, where skip can be incredibly slow).

oseek=n

Seek n blocks from beginning of output file before copying.

seek=n

Skip n blocks (using the specified output block size) from beginning of output file before copying. On non-seekable files, existing blocks will be read and space from the current end-of-file to the specified offset, if any, filled with null bytes; on seekable files, the implementation will seek to the specified offset or read the blocks as described for non-seekable files.

count=n

Copy only n input blocks.

conv=value[,value. . . ]

Where values are comma-separated symbols from the following list:

ascii

Convert EBCDIC to ASCII.

asciib

Convert EBCDIC to ASCII using BSD-compatible character translations.

ebcdic

Convert ASCII to EBCDIC. If converting fixed-length ASCII records without NEWLINEs, set up a pipeline with dd conv=unblock beforehand.

ebcdicb

Convert ASCII to EBCDIC using BSD-compatible character translations. If converting fixed-length ASCII records without NEWLINEs, set up a pipeline with dd conv=unblock beforehand.

ibm

Slightly different map of ASCII to EBCDIC. If converting fixed-length ASCII records without NEWLINEs, set up a pipeline with dd conv=unblock beforehand.

ibmb

Slightly different map of ASCII to EBCDIC using BSD-compatible character translations. If converting fixed-length ASCII records without NEWLINEs, set up a pipeline with dd conv=unblock beforehand.

The ascii (or asciib), ebcdic (or ebcdicb), and ibm (or ibmb) values are mutually exclusive.

block

Treat the input as a sequence of NEWLINE-terminated or EOF-terminated variable-length records independent of the input block boundaries. Each record is converted to a record with a fixed length specified by the conversion block size. Any NEWLINE character is removed from the input line; SPACE characters are appended to lines that are shorter than their conversion block size to fill the block. Lines that are longer than the conversion block size are truncated to the largest number of characters that will fit into that size; the number of truncated lines is reported.

unblock

Convert fixed-length records to variable length. Read a number of bytes equal to the conversion block size (or the number of bytes remaining in the input, if less than the conversion block size), delete all trailing SPACE characters, and append a NEWLINE character.

The block and unblock values are mutually exclusive.

lcase

Map upper-case characters specified by the LC_CTYPE keyword tolower to the corresponding lower-case character. Characters for which no mapping is specified will not be modified by this conversion.

ucase

Map lower-case characters specified by the LC_CTYPE keyword toupper to the corresponding upper-case character. Characters for which no mapping is specified will not be modified by this conversion.

The lcase and ucase symbols are mutually exclusive.

swab

Swap every pair of input bytes. If the current input record is an odd number of bytes, the last byte in the input record is ignored.

noerror

Do not stop processing on an input error. When an input error occurs, a diagnostic message will be written on standard error, followed by the current input and output block counts in the same format as used at completion. If the sync conversion is specified, the missing input will be replaced with null bytes and processed normally; otherwise, the input block will be omitted from the output.

notrunc

Do not truncate the output file. Preserve blocks in the output file not explicitly written by this invocation of dd. (See also the preceding of=file operand.)

sync

Pad every input block to the size of the ibs= buffer, appending null bytes. (If either block or unblock is also specified, append SPACE characters, rather than null bytes.)

If operands other than conv= are specified more than once, the last specified operand=value will be used.

For the bs=, cbs=, ibs=, and obs= operands, the application must supply an expression specifying a size in bytes. The expression, expr, can be:

1. a positive decimal number

2. a positive decimal number followed by k, specifying multiplication by 1024

3. a positive decimal number followed by b, specifying multiplication by 512

4. two or more positive decimal numbers (with or without k or b) separated by x, specifying the product of the indicated values.

All of the operands will be processed before any input is read.

USAGE

See largefile(5) for the description of the behavior of dd when encountering files greater than or equal to 2 Gbyte ( 2³¹ bytes).

EXAMPLES

---

Example 1 Copying From Tape Drive 0 to Tape Drive 1:




The following example copies from tape drive 0 to tape drive 1, using a common historical device naming convention.

example% dd if=/dev/rmt/0h  of=/dev/rmt/1h

---

---

Example 2 Stripping the First 10 bytes From Standard Input




The following example strips the first 10 bytes from standard input.

example% dd ibs=10  skip=1

---

---

Example 3 Reading a Tape Into an ASCII File




This example reads an EBCDIC tape blocked ten 80-byte EBCDIC card images per block into the ASCII file x :

example% dd if=/dev/tape of=x ibs=800 cbs=80 conv=ascii,lcase

---

---

Example 4 Using conv=sync to Write to Tape




The following example uses conv=sync when writing to a tape:

example% tar cvf - . | compress | dd obs=1024k of=/dev/rmt/0 conv=sync

---

ENVIRONMENT VARIABLES

See environ(5) for descriptions of the following environment variables that affect the execution of dd: LC_CTYPE, LC_MESSAGES, and NLSPATH.

EXIT STATUS

The following exit values are returned:

0

The input file was copied successfully.

>0

An error occurred.

If an input error is detected and the noerror conversion has not been specified, any partial output block will be written to the output file, a diagnostic message will be written, and the copy operation will be discontinued. If some other error is detected, a diagnostic message will be written and the copy operation will be discontinued.

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SUNWcsu

SEE ALSO

cp(1), sed(1), tr(1), attributes(5), environ(5), largefile(5)

DIAGNOSTICS

f+p records in(out)

numbers of full and partial blocks read(written)

NOTES

Do not use dd to copy files between file systems having different block sizes.

Using a blocked device to copy a file will result in extra nulls being added to the file to pad the final block to the block boundary.

When dd reads from a pipe, using the ibs=X and obs=Y operands, the output will always be blocked in chunks of size Y. When bs=Z is used, the output blocks will be whatever was available to be read from the pipe at the time.

When using dd to copy files to a tape device, the file size must be a multiple of the device sector size (for example, 512 Kbyte). To copy files of arbitrary size to a tape device, use tar(1) or cpio(1).

For SIGINT, dd will write status information to standard error before exiting. It will take the standard action for all other signals.

SunOS 5.8  Last Revised 16 Sep 1996

NAME | SYNOPSIS | DESCRIPTION | OPERANDS | USAGE | EXAMPLES | ENVIRONMENT VARIABLES | EXIT STATUS | ATTRIBUTES | SEE ALSO | DIAGNOSTICS | NOTES