ディスクやテープ関連の入出力負荷が大きいときは、drvconfig ユーティリティを実行しないでください。実行すると、データオーバーランエラーが発生することがあります。
システムが複数のディスクから構成されていて、負荷が大きいと、データオーバーランエラーが発生することがあります。
Solaris のインストール中に問題が発生する場合は、メーカのAutoSCSI ユーティリティを使用して、「configure Adapter」オプションの割り込みピン番号を次のように設定してください。
スロット |
割り込みピン |
---|---|
0 |
A |
1 |
B |
2 |
C |
詳しくは、ボードに付属しているマニュアルの「Configuration for Non-Conforming PCI Motherboards」と「Handling Motherboard Variations」を参照してください。
初期バージョンの Rev. A、B、C の BT-946C が Solaris 環境で動作しないことがあります。
BT-946C Rev. B を使用している場合は、ファームウェア、BIOS、AutoSCSI をそれぞれ少なくとも 4.25J、4.92E、1.06E にアップグレードするか、コントローラを少なくとも Rev. E にアップグレードしてください。