Solaris 8 (Intel 平台版本) 2/02 发行说明

文档勘误表

“OCF Client Properties Overview” in Solaris Smart Cards Administration Guide

“Valid and Default Card Types for Client Applications” 中的以下文字是错误的,并应该忽略:

For example, suppose you specify iButton, Cyberflex, and CardA as the validcards properties for Application B. Then you specify Cyberflex as the defaultcard property. If Application B accepts only its default card and the user tries to log in to Application B with CardA, then the system displays the message:


Waiting for Default Card 
Login to Application B is blocked until the user inserts a Cyberflex card into the reader.

“Setting Up a Smart Card (Tasks)” in Solaris Smart Cards Administration Guide

“Example--Creating User Information on a Smart Card (Command Line) ”一节中有一个属性名为 username。此属性名称是不正确的。 此属性名应为 user

“OCF Client Properties Overview” in Solaris Smart Cards Administration Guide“Additional Client Configuration Tasks” in Solaris Smart Cards Administration Guide

在 “OCF Client Properties Overview” 和 “Additional Client Configuration Tasks” 一节中缺少以下说明:


注意:

Do not set the Re-authentication timeout to zero.


“Setting Up a Smart Card (Overview)” in Solaris Smart Cards Administration Guide

在“Setting Up a Smart Card (Overview)” 一章中缺少以下说明:


注意:

Payflex cards do not support multiple profiles. Do not use Payflex cards in cases where a user needs to login to the desktop and one or more secure applications.


受影响的文档:本地化的新特性的列表 (4389948)

“本地化的新特性的列表” 没有包含在安装 Kiosk 中。

解决方法: 有关本地化的列表,请参见在 Solaris 8 桌面用户补充材料Solaris 8 System Administration Supplement Solaris 8 Software Developer SupplementSolaris 8 安装增补中的“新功能一览表”。

受影响的文档: AnswerBook2 (4356456) 中的 CDE User's Guide

在 AnswerBook2 软件中的 CDE User's Guide 有些图形在西班牙语、意大利语和德语环境中不可读出。

解决方法: 参见 http://docs.sun.com 上的 CDE User's Guide 中的可读图形。

受影响的文档: AnswerBook2 Help Collection

AnswerBook2 软件已经升级至版本 1.4.3 , 但文档引用的版本号仍为 1.4.2 版。 除了版本号码问题,此文档均是正确的。

受影响的文档:“Adaptec AHA-2940AU, 2940U, 2940U Dual, 2940UW, 2940UW Dual, 2940U2, 2940U2B, 2940U2W, 2944UW, 2950U2B, 3940AU, 3940AUW, 3940AUWD, 3940U, 3940UW, 3944AUWD, 3950U2B HBAs” in Solaris 8 (Intel Platform Edition) Device Cofiguration Guide,adp(7D) 和 cadp(7D) 在 Solaris 8 Reference Manual Collection 中,和 What's New in the Solaris 8 Operating Environment

当前声明不正确。

The Adaptec Ultra devices are supported by the cadp driver and they support PCI hot-plugging.

应该为以下的声明。

The following Adaptec Ultra SCSI devices are now supported by the adp driver and not the cadp driver.

当前声明显示出对 cadp 驱动程序的支持出现在以下文件中。 这些 Ultra SCSI 设备不支持 PCI 热插。但是, 由 cadp 驱动程序支持的 Ultra SCSI 设备支持 PCI 热插。

受影响的文档:“IPv6 Header Format” in System Administration Guide, Volume 3

4 位Priority字段的描述反映了已被 RFC 2460 (Solaris 8 执行 RFC 2460) 淘汰了的 RFC 1883。 结果,“Priority”字段已经被 8 位“Traffic Class”字段所替代。 IPv6 标题格式图形应该标识“Traffic Class”字段而不标识“Priority”字段。 此页面上的“Priority”项目也应该由如下的“Traffic Class”描述所替代:

This new value also reduces the number of bits that are allocated to the "Flow Label" field to 20 bits.

受影响的文档:“Priority Values” in System Administration Guide, Volume 3

4 位Priority”字段的描述反映了已被 RFC 2460 (Solaris 8 执行 RFC 2460) 淘汰了的 RFC 1883。 结果,Priority字段已被 8 位Traffic Class字段所替换。 Priority一节应替换为以下的Traffic Class一节。

Traffic Class

Originating nodes and forwarding routers can use the 8-bit Traffic Class field in the IPv6 header to identify and distinguish between different classes or priorities of IPv6 packets.

The following general requirements apply to the Traffic Class field.

受影响的文档:“Implementing IPsec” in System Administration Guide, Volume 3

此过程中的步骤 10c 不恰当地忽略了添加到 /etc/hostname.ip.tun0 文件中的行中所要求的 up 参数的添加。结果,必须将 up 参数添加在该步骤的行项的结尾。

受影响的文档: “NFS Parameters for the nfs Module” in System Administration Guide, Volume 3 (4299091)

适用于该节的一些校正:

受影响的文档: “NFS Parameters for the nfs Module” in System Administration Guide, Volume 3 (4299091)

删除 nfsreadmap 符号项。

受影响的文档: “NFS Parameters for rpcsec Parameters” in System Administration Guide, Volume 3(4299091)

对于 authdes_cachesz 符号,执行下列操作: