Documentation, Support, and Training
SPARC Enterprise T5440 Site Planning Guide
Minimum Clearance for Service Access
Agency Compliance Specifications
Operating Environment Requirements
About the SPARC Enterprise T5440 Server
About the Cable Management Arm
Rack Compatibility Requirements
Installing the SPARC Enterprise T5440 Server
Installing the Rack Slide Assembly
Installing the Server Into the Cabinet
Installing the Cable Management Arm (CMA)
Powering On the System for the First Time
Enabling the Service Processor Network Management Port
Logging Into the Service Processor
Using the Service Processor for Common Operations
Booting the Solaris Operating System
Updating Service Processor and Server Firmware
Removing Hardware RAID Volumes
Understanding Logical Domains Software
Logical Domain Software Overview
Operating the Solaris OS With Logical Domains
OpenBoot Firmware Not Available After Solaris OS Has Started if Domaining Is Enabled
Save Your Current Logical Domain Configurations to the SC
Result of an OpenBoot power-off Command
Results From Halting or Rebooting the Control Domain
ALOM-to-ILOM Command Reference
ILOM and ALOM CMT Command Comparison Tables
Understanding ILOM for the Sun SPARC Enterprise T5440 Server
Platform-Specific ILOM Features
Viewing and Configuring Host Control Information
Managing System User Interactions
Managing the Service Processor
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Virtual Keyswitch Settings
Sensors on Sun SPARC Enterprise T5440 Server
Indicators on the Sun SPARC Enterprise T5440 Server Server
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
ILOM and ALOM CMT Command Comparison
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
Host Monitoring Event Messages
Infrastructure Boards and Cables
Understanding Fault Handling Options
Connecting to the Service Processor
Displaying FRU Information With Oracle ILOM
Oracle ILOM-to-ALOM CMT Command Reference
Preparing to Service the System
Obtain the Chassis Serial Number
Obtain the Chassis Serial Number Remotely
Extending the Server to the Maintenance Position
Remove the Server From the Rack
Perform Electrostatic Discharge – Antistatic Prevention Measures
Servicing Customer-Replaceable Units
Hot-Pluggable and Hot‐Swappable Devices
Servicing Field-Replaceable Units
Servicing the Service Processor
Servicing the Power Distribution Board
Servicing the Fan Tray Carriage
Servicing the Hard Drive Backplane
Servicing the Flex Cable Assembly
Servicing the Front Control Panel
Returning the Server to Operation
Install the Server Into the Rack
Slide the Server Into the Rack
Connect the Power Cords to the Server
Performing Node Reconfiguration
I/O Connections to CMP/Memory Modules
Recovering From a Failed CMP/Memory Module
I/O Fabric in 2P Configuration
I/O Fabric in 4P Configuration
Serial Management Port Connector Pinouts
Network Management Port Connector Pinouts
The following software is required or recommended for LDoms on the SPARC Enterprise T5440 server:
(Required) Solaris 10 11/06 OS – Refer to the Solaris 10 Collection for more information.
(Required) Solaris 10 11/06 OS patches:
124921-02, which contains updates to the Logical Domains 1.0 drivers and utilities. Logical Domains networking will be broken without this patch.
125043-01, which contains updates to the console (qcn) drivers. This patch depends on KU 118833-36, so if this is not already updated on your system, you will need to do so.
For further information about patches, see the product notes for your server.
(Required) System firmware version 6.4.x – Refer to your server’s documentation for more information.
(Required) Logical Domains Manager 1.0.x software.
(Recommended) Solaris Security Toolkit 4.2 software – Refer to the Solaris Security Toolkit 4.2 Administration Guide and Solaris Security Toolkit 4.2 Reference Manual for more information
Note - During the boot process, domains that use virtual boot devices must wait for their service domains to come online first. This can prolong the boot process.