This option is used to enable an already existing cluster transport cable.
Become superuser on any node in the cluster.
Enter the scsetup(1M) utility.
The Main Menu is displayed.
Access the Cluster Interconnect Menu by typing 4 (Cluster interconnect).
Enable the transport cable by typing 7 (Enable a transport cable).
Follow the instructions when prompted. You need to enter both the node and the adapter names of one of the endpoints of the cable you are trying to identify.
Verify that the cable is enabled.
# scconf -p | grep cable
This example shows how to enable a cluster transport cable on adapter qfe-1 located on the node phys-schost-2.
[Become superuser on any node.] [Enter the scsetup utility:] # scsetup Select Cluster interconnect>Enable a transport cable. Answer the questions when prompted. You will need the following information. You Will Need: Example: node names phys-schost-2 adapter names qfe1 junction names hub1 [Verify that the scconf command completed successfully:] scconf -c -m endpoint=phys-schost-2:qfe1,state=enabled Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable is enabled:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled