You can use a dedicated SPARC workstation, known as the administrative console, to administer the active cluster. Typically, you install and run the Cluster Control Panel (CCP) and graphical user interface (GUI) tools on the administrative console. For more information on the CCP, see How to Log In to Sun Cluster Remotely. For instructions on installing the Cluster Control Panel module for Sun Management Center and SunPlex Manager GUI tools, see the Sun Cluster Software Installation Guide for Solaris OS.
The administrative console is not a cluster node. The administrative console is used for remote access to the cluster nodes, either over the public network or through a network-based terminal concentrator.
If your SPARC cluster consists of a Sun EnterpriseTM 10000 server, you must log in from the administrative console to the System Service Processor (SSP). Connect using the netcon.1M command. The default method for netcon to connect with a Sun Enterprise 10000 domain is through the network interface. If the network is inaccessible, you can use netcon in “exclusive” mode by setting the -f option. You can also send ~* during a normal netcon session. Either of the previous solutions give you the option of toggling to the serial interface if the network becomes unreachable.
Sun Cluster does not require a dedicated administrative console, but using a console provides these benefits:
Enables centralized cluster management by grouping console and management tools on the same machine
Provides potentially quicker problem resolution by Enterprise Services or your service provider