Sun Java Enterprise System 5 Installation Reference for UNIX

Chapter 4 Configuration Worksheets

This chapter contains the worksheets for gathering configuration information that is required during a Configure Now installation. These worksheets are companion tools for working with the configuration information in Chapter 3, Configuration Information. Worksheets are included only for the product components that can be configured by the Sun Java^TM Enterprise System (Java ES) installer.

This chapter contains the following sections:

Common Settings Configuration Information

For detailed explanations of the fields in this worksheet, refer to the tables under Common Server Settings

Table 4–1 Common Server Settings Configuration Worksheet


Label and State File Parameter	Data
Host Name `CMN_HOST_NAME`	Your data: _____________________________________________________ The default value is the local host name. For example, `mycomputer.`
DNS Domain Name `CMN_DOMAIN_NAME`	Your data: _____________________________________________________ The default value is domain name for the local host. For example, .`example.com.`
Host IP Address `CMN_IPADDRESS`	Your data: _____________________________________________________ The default value is the IP address for the local host.
Administrator User ID `CMN_ADMIN_USER`	Your data: _____________________________________________________ Note: If you chose to use a single administrator account, this field is not present.
Administrator Password `CMN_ADMIN_PASSWORD`	Your data: _____________________________________________________ Note: If you chose to use a single administrator account, this field is not present.
System User `CMN_SYSTEM_USER`	Your data: _____________________________________________________ The default value is `root.`
System Group `CMN_SYSTEM_GROUP`	Your data: _____________________________________________________ The default value is `root.`

Access Manager Configuration Information

This section contains worksheets for the following topics:

Access Manager Administration

For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager Administration Information.

Table 4–2 Access Manager Administration Information Configuration Worksheet


Label and State File Parameter	Data
Install type `AM_REALM`	Your data: _____________________________________________________ Legacy mode used by default.
Administrator User ID `IS_ADMIN_USER_ID`	Your data: amadmin Cannot be changed.
Administrator Password `IS_ADMINPASSWD`	Your data: _____________________________________________________ (must be at least eight characters)
LDAP User ID `IS_LDAP_USER`	Your data: amldapuser Cannot be changed.
LDAP Password `IS_LDAPUSERPASSWD`	Your data: ______________________________________________________ Restriction: Must be different from Administrator Password.
Password Encryption Key `AM_ENC_PWD`	Your data: ______________________________________________________ The password encryption key be 12 characters or longer for a new install, or it can be blank. For an upgrade, the password can be shorter. Required for a remote portal installation.

Web Container

The installer needs the following information if you are installing Access Manager Administration Console. There are two worksheets for Access Manager, one for each of the web containers in which you can deploy Access Manager:

Access Manager With Application Server

For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager With Application Server.

Table 4–3 Access Manager With Application Server Configuration Worksheet


Label and State File Parameter	Data
Secure Server Instance Port `IS_IAS81INSTANCE_PORT`	Your data: ________________________________________________________ The default value is `8080`.
Secure Administrator Server Port `IS_IAS81_ADMINPORT`	Your data: ________________________________________________________ The default value is `4849`.
Administrator User ID `IS_IAS81_ADMIN`	Your data: ________________________________________________________ The default value is the administrator user ID you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present.
Administrator Password `IS_IAS81_ADMINPASSWD`	Your data: ________________________________________________________ The default value is the Administrator User password you provided under Common Server settings. Note: If you chose to use a single administrator account, this field is not present.

Access Manager With Web Server

For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager With Web Server.

Table 4–4 Access Manager With Web Server Configuration Worksheet


Label and State File Parameter	Data
Host Name `IS_WS_HOST_NAME`	Your data: ________________________________________________________ The default value is the fully qualified domain name for the current host.
Administrator User ID `IS_WS_ADMIN_ID`	Your data: ________________________________________________________ The default value is the administrator user ID you provided under Common Settings.
Administrator Password `IS_WS_ADMIN_PASSWORD`	Your data: ________________________________________________________ The default value is the administrator user ID you provided under Common Settings.
Document Root Directory `IS_WS_DOC_DIR`	Your data: ________________________________________________________ The default value is: Solaris OS: `/var/opt/SUNWwbsvr7/https:-hostname.domain/docs` Linux and HP-UX: `/var/opt/sun/webserver7/https:-hostname.domain/docs`
Web Server Port `IS_WS_INSTANCE_PORT`	Your data: ________________________________________________________ The default value is `80.`
Web Server Instance Directory `IS_WS_INSTANCE_DIR`	Your data: ________________________________________________________ The path must have the following syntax: `WebServer-base/https-webserver-instancename` If you are installing Web Server in this session, the default value for `WebServer-base` is the Web Server installation directory: Solaris OS: `/var/opt/SUNWwbsvr7` Linux and HP-UX: `/var/opt/sun/webserver7`
Web Server Protocol `IS_WS_PROTOCOL`	Your data: ________________________________________________________ The default value is HTTP.

Access Manager Services

You can install Access Manager in various ways:

Specifying Information for Access Manager Console

Table 4–5 Access Manager Services Information for Access Manager Console Configuration Worksheet


Label and State File Parameter	Data
Host Name `IS_SERVER_HOST`	Your data: ________________________________________________________
Services Deployment URI `SERVER_DEPLOY_URI`	Your data: ________________________________________________________ The default value `is amserver`. Note: Do not enter a leading slash.
Common Domain Deployment URI `CDS_DEPLOY_URI`	Your data: ________________________________________________________ The default value is `amcommon`. Note: Do not enter a leading slash.
Cookie Domain `COOKIE_DOMAIN_LIST`	Your data: ________________________________________________________ For example: `.example.com` Note: Leading period (`.`) is required.
Password Deployment URI `PASSWORD_SERVICE_DEPLOY_URI`	Your data: ________________________________________________________ The default value is `ampassword.` Do not enter a leading slash.
Console Protocol `CONSOLE_PROTOCOL`	Your data: ________________________________________________________ The default value is `HTTP`

Specifying Information for Access Manager Console

Table 4–6 Access Manager Directory Server Configuration Worksheet


Label and State File Parameter	Data
Administration Console `USE_DSAME_SERVICES_WEB_CONTAINER` `CONSOLE_REMOTE`	Your data: ________________________________________________________ The default value is true (deploy new console).
Console Deployment URI `CONSOLE_DEPLOY_URI`	Your data: ________________________________________________________ The default value is `amconsole.`
Console Host Name `CONSOLE_HOST`	Your data: ________________________________________________________ The default value is based on the fully qualified domain name for this host. For example, `mycomputer.example.com.`
Console Port `CONSOLE_PORT`	Your data: ________________________________________________________ The default value is `8080.`

Access Manager Installing Console (Core Already Installed)

For detailed explanations of the fields in this worksheet, refer to the tables under Installing Access Manager Console (Core Already Installed).

Table 4–7 Access Manager Installing Console (Core Already Installed) Configuration Worksheet


Label and State File Parameter	Data
Console Deployment URI `CONSOLE_DEPLOY_URI`	Your data: ________________________________________________________ Only relevant for Legacy mode (6.x). The default value is: `amconsole`. Note: Do not enter a leading slash.
Password Services Deployment URI `PASSWORD_SERVICE_DEPLOY_URI`	Your data: ________________________________________________________ The default value is: `ampassword`. Note: Do not enter a leading slash.

Installing Access Manager Console (Core Not Already Installed)

For detailed explanations of the fields in this worksheet, refer to the tables under Installing Access Manager Console (Core Not Already Installed).

Table 4–8 Installing Console (Core Not Already Installed) Configuration Worksheet


Label and State File Parameter	Data
Console Deployment URI `CONSOLE_DEPLOY_URI`	Your data: ________________________________________________________ The default value is `amconsole.`
Password Services Deployment URI `PASSWORD_SERVICE_DEPLOY_URI`	Your data: ________________________________________________________ The default value is `ampassword,` no leading slash.

Installing Federation Management (Core Already Installed)

For detailed explanations of the fields in this worksheet, refer to the tables under Installing Federation Management (Core Already Installed).

Table 4–9 Installing Federation Management (Core Already Installed) Configuration Worksheet


Label and State File Parameter	Data
Common Domain Deployment URI `CDS_DEPLOY_URI`	Your data: ________________________________________________________ The default value is `amcommon,` no leading slash.

Access Manager Directory Server

For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager Directory Server Information.

Table 4–10 Access Manager Directory Server Configuration Worksheet


Label and State File Parameter	Data
Directory Server Host `IS_DS_HOSTNAME`	Your data: ________________________________________________________ The default value is the fully qualified domain name of the local host.
Directory Server Port `IS_DS_PORT`	Your data: ________________________________________________________ The default value is `389`.
Access Manager Directory Root Suffix `IS_ROOT_SUFFIX`	Your data: ________________________________________________________ The default value is based on the fully qualified domain name for this host, minus the host name. For example, if this host is `siroe.subdomain.example.com` , the value is `dc=subdomain,dc=example,dc=com`.
Directory Manager DN `IS_DIRMGRDN`	Your data: ________________________________________________________ The default value is `cn=Directory Manager`.
Directory Manager Password `IS_DIRMGRPASSWD`	Your data: ________________________________________________________

Access Manager Provisioned Directory

Existing Provisioned Directory Found

For detailed explanations of the fields in this worksheet, refer to the tables under Existing Provisioned Directory Found.

Table 4–11 Existing Provisioned Directory


Label and State File Parameter	Data
User Naming Attribute `IS_USER_NAMING_ATTR`	Your data: ________________________________________________________ The default value is `uid`.

No Existing Provisioned Directory Found

For detailed explanations of the fields in this worksheet, refer to the tables under No Existing Provisioned Directory Found.

Table 4–12 No Existing Provisioned Directory Found


Label and State File Parameter	Data
Is Directory Server provisioned with user data? `IS_LOAD_DIT`	Your data: ________________________________________________________ The default value is `No`.
Organization Marker Object Class `IS_ORG_OBJECT_CLASS`	Your data: ________________________________________________________ The default value is `SunISManagedOrganization`.
Organization Naming Attribute `IS_ORG_NAMING_ATTR`	Your data: ________________________________________________________ The default value is `o`.
User Marker Object Class `IS_USER_OBJECT_CLASS`	Your data: ________________________________________________________ The default value is `inetorgperson`.
User Naming Attribute `IS_USER_NAMING_ATTR`	Your data: ________________________________________________________ The default value is `uid`.

Access Manager SDK Configuration Information

This section contains the following topics:

Access Manager SDK Administration

For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Administration Information.

Table 4–13 Access Manager SDK Administration Configuration Worksheet


Label and State File Parameter	Data
Administrator User ID `IS_ADMIN_USER_ID`	Your data: _____________________________________________________ The default name, `amadmin`, cannot be changed.
Administrator Password `IS_ADMINPASSWD`	Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host.
LDAP User ID `IS_LDAP_USER`	Your data: _____________________________________________________ The default user name, `amldapuser`, cannot be changed.
LDAP Password `IS_LDAPUSERPASSWD`	Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host.
Password Encryption Key `AM_ENC_PWD`	Your data: _____________________________________________________ The password encryption key be 12 characters or longer for a new install, or it can be blank. For an upgrade, the password can be shorter. Required for a remote portal installation.

Access Manager SDK Directory Server

For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Directory Server Information.

Table 4–14 Access Manager SDK Directory Server Configuration Worksheet


Label and State File Parameter	Data
Directory Server Host `IS_DS_HOSTNAME`	Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host.
Directory Server Port `IS_DS_PORT`	Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host.
Access Manager Directory Root Suffix `IS_ROOT_SUFFIX`	Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. The default value is based on the fully qualified domain name for this host, minus the host name. For example, if this host is `siroe.subdomain.example.com` , the value is `dc=subdomain,dc=example,dc=com`. Use this default value as an example of format only.
Directory Manager DN `IS_DIRMGRDN`	Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. The default value is `cn=Directory Manager`.
Directory Manager Password `IS_DIRMGRPASSWD`	Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host.

Access Manager SDK Provisioned Directory

For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Provisioned Directory Information.

Table 4–15 Access Manager SDK Provisioned Directory Configuration Worksheet


Label and State File Parameter	Data
User Naming Attribute `IS_USER_NAMING_ATTR`	Your data: ________________________________________________________ The default value is `uid`.

Existing Provisioned Directory Found

If the installer finds an existing provisioned directory, you provide the following information.

For detailed explanations of the fields in this worksheet, refer to the tables Existing Provisioned Directory Found.

Table 4–16 Existing Provisioned Directory Information for Access Manager SDK


Label and State File Parameter	Data
User Naming Attribute `IS_USER_NAMING_ATTR`	Your data: _____________________________________________________ The default value is `uid`.

No Existing Provisioned Directory Found

For detailed explanations of the fields in this worksheet, refer to the tables No Existing Provisioned Directory Found.

Table 4–17 No Existing Provisioned Directory Information for Access Manager SDK


Label and State File Parameter	Data
Is Directory Server provisioned with user data? `IS_LOAD_DIT`	Your data: _____________________________________________________ The default value is `No`.
Organization Marker Object Class `IS_ORG_OBJECT_CLASS`	Your data: _____________________________________________________ The default value is `SunISManagedOrganization`.
Organization Naming Attribute `IS_ORG_NAMING_ATTR`	Your data: _____________________________________________________ The default value is `o`.
User Marker Object Class `IS_USER_OBJECT_CLASS`	Your data: _____________________________________________________ The default value is `inetorgperson`.
User Naming Attribute `IS_USER_NAMING_ATTR`	Your data: _____________________________________________________ The default value is `uid`.

Access Manager SDK Web Container

For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Web Container Information.

Table 4–18 Access Manager SDK Web Container Configuration Worksheet


Label and State File Parameter	Data
Host `IS_WS_HOST_NAME`	Your data: _____________________________________________________ There is no default value.
Services Deployment URI `SERVER_DEPLOY_URI`	Your data: _____________________________________________________ The default value is `amserver`. Do not enter a leading slash.
Cookie Domain `COOKIE_DOMAIN_LIST`	Your data: _____________________________________________________ The default value is the current domain, prefixed by a dot (`.`), such as `.example.com`.
Web Container Hostname `IS_SERVER_HOST`	Your data: _____________________________________________________
Web Container Port `IS_SERVER_PORT`	Your data: _____________________________________________________
Web Container Protocol `IS_SERVER_PROTOCOL`	Your data: _____________________________________________________
Services Port `IS_WS_INSTANCE_PORT` `IS_IAS81INSTANCE_PORT`	Your data: _____________________________________________________ Use the port number specified when Access Manager core services were installed. Web Server is default 80, (Application Server is 8080.

Application Server Configuration Information

This section contains worksheets for the following topics:

For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager Configuration Information.

Application Server Administration

For detailed explanations of the fields in this worksheet, refer to the tables under Application Server Administration Information.

Table 4–19 Application Server Administration Configuration Worksheet


Label and State File Parameter	Data
Admin User Name `AS_ADMIN_USER_NAME`	Your data: _____________________________________________________ The default value is the Administrator User ID you provided under Common Server Settings. Refer to Common Settings. Note: If you chose to use a single administrator account, this field is not present.
Password `AS_PASSWORD`	Your data: _____________________________________________________ The default value is the Administrator Password you provided under Common Server Settings. Minimum of 8 characters. Refer to Common Settings. Note: If you chose to use a single administrator account, this field is not present.
Admin Port `AS_ADMIN_PORT`	Your data: _____________________________________________________ The default value is `4849.`
JMX Port `AS_JMX_PORT`	Your data: _____________________________________________________ The default value is `8686.`
HTTP Server Port `AS_HTTP_PORT`	Your data: _____________________________________________________ The default value is `8080`. If the installer detects that the default port is used, an alternative value is suggested.
HTTPS Port `AS_HTTPS_PORT`	Your data: _____________________________________________________ The default value is `8181.`
Master Password `AS_MASTER_PASSWORD`	Your data: _____________________________________________________ The default value is the Administrator Password you provided under Common Server Settings. Minimum of 8 characters.

Application Server Node Agent

For detailed explanations of the fields in this worksheet, refer to the tables under Application Server Node Agent Information.

Table 4–20 Application Server Node Agent Configuration Worksheet


Label and State File Parameter	Data
Admin Host Name `ASNA_ADMIN_HOST_NAME`	Your data: _____________________________________________________ The default value is the name of local host, including domain.
Admin User Name `ASNA_ADMIN_USER_NAME`	Your data: _____________________________________________________ The default value is the Administrator User ID you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present.
Password `ASNA_PASSWORD`	Your data: _____________________________________________________ Password for the Application Server admin user. There is no default value. Note: If you chose to use a single administrator account, this field is not present.
Master Password `ASNA_MASTER_PASSWORD`	Your data: _____________________________________________________ Default value is the admin password you provided under Common Server Settings.
Admin Port `ASNA_ADMIN_PORT`	Your data: _____________________________________________________ The default value is `4849.`
Node Agent Name `ASNA_NODE_AGENT_NAME`	Your data: _____________________________________________________ Name of the local node. The default value is the local host name.

Application Server Load Balancing Plugin

For detailed explanations of the fields in this worksheet, refer to the tables under Application Server Load Balancing Plugin Information.

Table 4–21 Application Server Load Balancing Plugin Configuration Worksheet


Label and State File Parameter	Data
Web server that the load balancing plugin will use `AS_WEB_SERVER_PLUGIN_TYPE`	Your data: _____________________________________________________ The default value is `Sun Java System Web Server`. Note: HP-UX does not support Apache Web Server.
Web server installation directory `AS_WEB_SERVER_LOCATION`	Your data: _____________________________________________________ The default value is: Solaris OS: `/opt/SUNWwbsvr7` Linux and HP-UX: `/opt/sun/webserver7`
Web Server instance directory `CMN_WS_INSTANCE_DIR`	Your data: _____________________________________________________ The default value is: Solaris OS: `/var/opt/SUNWwbsvr7` Linux and HP-UX: `/var/opt/sun/webserver7`

Directory Server Configuration Information

This sections contains worksheets for the following topics:

Directory Server Instance Creation Choice

For detailed explanations of the fields in this worksheet, refer to the tables under Directory Server Instance Creation Choice Information.

Table 4–22 Directory Server Instance Creation Choice Configuration Worksheet


Label and State File Parameter	Data
Choose to create a directory instance `CREATE_INSTANCE`	Your data: _____________________________________________________ The default value is `Yes.` If you accept the default, you will be asked to provide the information required to create an instance.

Directory Server Instance Creation

For detailed explanations of the fields in this worksheet, refer to the tables under Directory Server Instance Creation Information.

Table 4–23 Directory Server Instance Creation Configuration Worksheet


Label and State File Parameter	Data
Instance Directory `DSEE_INSTANCE_DIRECTORY`	Your data: _______________________________________________________________ The default value is: Solaris OS: `/var/opt/SUNWdsee/dsinst1` Linux and HP-UX: `/var/opt/sun/dsinst1`
Directory Instance Port `DSEE_INSTANCE_PORT`	Your data: _______________________________________________________________ The default value is `389`.
Directory Instance SSL Port `DSEE_INSTANCE_SSL_PORT`	Your data: _______________________________________________________________ The default value is `636`.
Directory Manager DN `DSEE_DN_MANAGER`	Your data: _______________________________________________________________ The default value is `cn=Directory Manager`.
System User `DSEE_INSTANCE_USER`	Your data: _______________________________________________________________ The default value is `root`.
System Group `DSEE_INSTANCE_GROUP`	Your data: _______________________________________________________________ The default value is `root`.
Directory Manager Password `DSEE_INSTANCE_PASSWORD`	Your data: _______________________________________________________________ The default value is the Administrator Password you provided under Common Server Settings. Minimum of 8 characters. Refer to Common Settings.
Suffix `DSEE_SUFFIX`	Your data: _______________________________________________________________ The default value is formed by the segments of the fully qualified domain name for the current host. For example, if you install on `siroe.sub1.example.com`, the default value is `dc=sub1,dc=example,dc=com`.

HADB Configuration Information

For detailed explanations of the fields in this worksheet, refer to the tables under HADB Configuration Information.

Table 4–24 HADB Configuration Worksheet


Label and State File Parameter	Data
HADB Management Port `HADB_DEFAULT_ADMINPORT`	Your data: _______________________________________________________________ For example: 1862
HADB Resource Directory `HADB_DEFAULT_RESDIR`	Your data: _______________________________________________________________ For example: `/var/opt`
HADB Administrator Group `HADB_DEFAULT_GROUP`	Your data: _______________________________________________________________ The default value is `other`.
HADB Automatic Startup `HADB_AUTO_START`	Your data: _______________________________________________________________ The default value is `Yes`.
HADB Group Management `HADB_ALLOW_GROUPMANAGE`	Your data: _______________________________________________________________ The default value is `No`.

Portal Server Configuration Information

This section contains worksheets for the following topics:

Portal Server Web Container Choice

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Web Container Choice.

Table 4–25 Portal Server Web Container Choice Configuration Worksheet


Label and State File Parameter	Data
Web container choice for Portal Server `PS_DEPLOY_TYPE`	Your data: _______________________________________________________________ The default value is `Web Server`.

Portal Server on Java ES Application Server

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Java ES Application Server as Web Container.

Table 4–26 Portal Server on Java ES Application Server Configuration Worksheet


Label and State File Parameter	Data
Installation Directory `PS_DEPLOY_DIR`	Your data: _______________________________________________________________ The default value is: Solaris OS: `/opt/SUNWappserver/appserver` Linux and HP-UX: `/opt/sun/appserver`
Domain Name `PS_DEPLOY_DOMAIN`	Your data: _______________________________________________________________ The default value is `domain1`.
Server Instance Directory `PS_DEPLOY_INSTANCE_DIR`	Your data: _______________________________________________________________ The default value is: Solaris OS: `/var/opt/SUNWappserver/domains/domain1` Linux and HP-UX: `/var/opt/sun/appserver/domains/domain1`
Server Instance Port `PS_DEPLOY_PORT`	Your data: _______________________________________________________________ The default value is `8080`.
Document Root Directory `PS_DEPLOY_DOCROOT`	Your data: _______________________________________________________________ Solaris OS: `/var/opt/SUNWappserver/domains/domain1/docroot` Linux and HP-UX: `/var/opt/sun/appserver/domains/domain1/docroot`
Administration Port `PS_DEPLOY_ADMIN_PORT`	Your data: _______________________________________________________________ The default value is `4849`.
Administrator User ID `PS_DEPLOY_ADMIN`	Your data: _______________________________________________________________ The default value is `admin`.
Administrator Password `PS_DEPLOY_ADMIN_PASSWORD`	Your data: _______________________________________________________________ The default value is from Common Server Settings.
Secure Server Instance Protocol `PS_DEPLOY_PROTOCOL`	Your data: _______________________________________________________________ The default value is `http`.
Secure Administration Server Protocol `PS_DEPLOY_ADMIN_PROTOCOL`	Your data: _______________________________________________________________ The default value is `http`.

Portal Server on Java ES Web Server

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Java ES Web Server as Web Container.

Table 4–27 Portal Server on Java ES Web Server Configuration Worksheet


Label and State File Parameter	Data
Installation Directory `PS_DEPLOY_DIR`	Your data: _______________________________________________________________ The default value is: Solaris OS: `/opt/SUNWwbsvr7` Linux and HP-UX: `/opt/sun/webserver7`
Administration Domain `PS_DEPLOY_DOMAIN`	Your data: _______________________________________________________________ The default value is `domain1`.
Instance Directory `PS_INSTANCE_DIR`	Your data: _______________________________________________________________ The default value is: Solaris OS: `/var/opt/SUNWwbsvr7-hostname.domainname` Linux and HP-UX: `/var/opt/sun/webserver7-hostname.domainname`
Server Instance Port `PS_DEPLOY_PORT`	Your data: _______________________________________________________________ The default value is `80`.
Server Document Root `PS_DEPLOY_DOCROOT`	Your data: _______________________________________________________________ The default value is: Solaris OS: `/opt/SUNWwbsvr7/docs` Linux and HP-UX: `/opt/sun/webserver7/docs`.
Secure Server Instance Port `PS_DEPLOY_PROTOCOL`	Your data: _______________________________________________________________ The default value is: `http`.
Administration Host `PS_DEPLOY_ADMIN_HOST`	Your data: _______________________________________________________________ Fully qualified domain name. For example, `mycomputer.example.com`.
Administration Port `PS_DEPLOY_ADMIN_PORT`	Your data: _______________________________________________________________ The default value is `8989`
Secure Server Admin Protocol `PS_DEPLOY_ADMIN_PROTOCOL`	Your data: _______________________________________________________________ The default value is selected (`https`).

Portal Server on BEA WebLogic Server

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server BEA WebLogic as Web Container.

Table 4–28 Portal Server on BEA WebLogic Server Configuration Worksheet


Label and State File Parameter	Data
Installation Directory `PS_DEPLOY_PRODUCT_DIR`	Your data: _______________________________________________________________ The default value is `/usr/local/bea/weblogic81`.
Instance Directory `PS_DEPLOY_INSTANCE_DIR`	Your data: _______________________________________________________________ The default value is `/usr/local/bea/user_projects/domains`.
JDK Home Directory `PS_DEPLOY_JDK_DIR`	Your data: _______________________________________________________________ The default value is `/usr/local/bea/jdk142_05`.
Server / Cluster Port `PS_DEPLOY_PORT`	Your data: _______________________________________________________________ The default value is `7001`.
Server / Cluster Protocol `PS_DEPLOY_PROTOCOL`	Your data: _______________________________________________________________ The default value is `http`.
Administrator User ID `PS_DEPLOY_ADMIN`	Your data: _______________________________________________________________ The default value is `weblogic`.
Administrator Password `PS_DEPLOY_ADMIN_PASSWORD`	Your data: _______________________________________________________________
Administrator Host `PS_DEPLOY_ADMIN_HOST`	Your data: _______________________________________________________________ Fully qualified domain name. For example, `mycomputer.example.com`.
Administrator Port `PS_DEPLOY_ADMIN_PORT`	Your data: _______________________________________________________________ The default value is `7001`.
Administrator Protocol `PS_DEPLOY_ADMIN_PROTOCOL`	Your data: _______________________________________________________________ The default value is `http`.
Managed Server `PS_DEPLOY_NOW`	Your data: _______________________________________________________________ The default value is `n`.

Portal Server on IBM WebSphere Application Server

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server IBM WebSphere as Web Container.

Table 4–29 Portal Server on IBM WebSphere Application Server Configuration Worksheet


Label and State File Parameter	Data
Installation Directory `PS_DEPLOY_DIR`	Your data: _______________________________________________________________ The default value is:`/opt/IBM/WebSphere/Express51/AppServer`.
Cell Name `PS_DEPLOY_CELL`	Your data: _______________________________________________________________ The default value is `DefaultNode`.
Node Name `PS_DEPLOY_NODE`	Your data: _______________________________________________________________ The default value is `DefaultNode`.
Server Instance `PS_DEPLOY_INSTANCE`	Your data: _______________________________________________________________ The default value is `server1`.
Server Instance Port `PS_DEPLOY_PORT`	Your data: _______________________________________________________________ The default value is `9080`.
Server Instance Protocol `PS_DEPLOY_PROTOCOL`	Your data: _______________________________________________________________ The default value is `http`.
Document Root Directory `PS_DEPLOY_DOCROOT`	Your data: _______________________________________________________________ The default value is `/opt/IBM/WebSphere/Express51/AppServer/installedApps\` `DefaultNode/DefaultApplication.ear`.
JDK Home Directory `PS_DEPLOY_JDK_DIR`	Your data: _______________________________________________________________ The default value is `/opt/IBM/WebsSphere/Express51/Appserver/java`.
Administrator User ID `PS_DEPLOY_ADMIN`	Your data: _______________________________________________________________ The default value is `weblogic`.
Administrator Password `PS_DEPLOY_ADMIN_PASSWORD`	Password of the WebSphere administrator (system user).
Administrator Host `PS_DEPLOY_ADMIN_HOST`	Administrator server host name. Fully qualified domain name. For example, `mycomputer.example.com`.
Administrator Port `PS_DEPLOY_ADMIN_PORT`	The default value is `7090`.
Administrator Protocol `PS_DEPLOY_ADMIN_PROTOCOL`	Specify whether the Administrator Port is a secure port. A secure port uses the HTTPS protocol. A non-secure port uses HTTP. The default value is `http`.

Portal Server on Web Container

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Web Container Deployment Information.

Table 4–30 Portal Server on Web Container Configuration Worksheet


Label and State File Parameter	Data
Portal Access `PS_PORTALACCESS_URL`	Your data: _______________________________________________________________
Portal ID `PS_PORTAL_ID`	Your data: _______________________________________________________________ The default value is `portal1.`
Search ID `PS_SEARCH_ID`	Your data: _______________________________________________________________ The default value is `search1.`
Deployment URI `PS_DEPLOY_URI`	Your data: _______________________________________________________________ The default value is `/portal.`
Portal Instance ID `PS_INSTANCE_ID`	Your data: _______________________________________________________________
Enable Secure Remote Access `SRA_SWITCH_CORE`	Your data: _______________________________________________________________ The default value is `Disabled.`
Developer Sample `PS_DEVELOPER_PORTAL`	Your data: _______________________________________________________________ The default value is selected.
Enterprise Sample `PS_ENTERPRISE_PORTAL`	Your data: _______________________________________________________________ The default value is selected.
Community Sample `PS_COMMUNITY_PORTAL`	Your data: _______________________________________________________________ The default value is selected.

Portal Server Secure Remote Access Configuration Information

This section contains worksheets for the following topics:

Portal Server Secure Remote Access Gateway Access

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Gateway Access.

Table 4–31 Portal Server Secure Remote Access Gateway Access Configuration Worksheet


Label and State File Parameter	Data
Host Name `SRA_SERVER_HOST`	Your data: _______________________________________________________________ The default value is the name of the local host.
Subdomain `SRA_SERVER_DOMAIN`	Your data: _______________________________________________________________ The default value is the domain name of the host.
Domain `SRA_GATEWAY_DOMAIN`	Your data: _______________________________________________________________ The default value is the default domain of the host.
Access Port `SRA_GATEWAY_PORT`	Your data: _______________________________________________________________ The default value is `443`.
Gateway Profile Name `SRA_GATEWAY_PROFILE`	Your data: _______________________________________________________________ The default value is `default`.
Log User Password `SRA_LOG_USER_PASSWORD`	Your data: _______________________________________________________________

Portal Server Secure Remote Access Gateway Configuration

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Gateway Configuration.

Table 4–32 Portal Server Secure Remote Access Gateway Configuration Worksheet


Label and State File Parameter	Data
Protocol `SRA_GW_PROTOCOL`	Your data: _______________________________________________________________ The default value is `https.`
Host Name `SRA_GW_HOSTNAME`	Your data: _______________________________________________________________ The default value is the name of the local host.
Subdomain `SRA_GW_SUBDOMAIN`	Your data: _______________________________________________________________ There is no default value.
Domain `SRA_GW_DOMAIN`	Your data: _______________________________________________________________ The default value is the domain of the local host.
Host IP Address `SRA_GW_IPADDRESS`	Your data: _______________________________________________________________ The default value is IP address of the local host.
Access Port `SRA_GW_PORT`	Your data: _______________________________________________________________ The default value is `443.`
Gateway Profile Name `SRA_GW_PROFILE`	Your data: _______________________________________________________________ The default value is `default.`

Portal Server Secure Remote Access Netlet Proxy

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Netlet Proxy Configuration.

Table 4–33 Portal Server Secure Remote Access Netlet Proxy Configuration Worksheet


Label and State File Parameter	Data
Host Name `SRA_NLP_HOSTNAME`	Your data: _____________________________________________________ The default value is the name of the local host.
Subdomain `SRA_NLP_SUBDOMAIN`	Your data: _____________________________________________________ There is no default value.
Domain `SRA_NLP_DOMAIN`	Your data: _____________________________________________________ The default value is the domain of the local host.
Host IP Address `SRA_NLP_IPADDRESS`	Your data: _____________________________________________________ The default value is the IP address of the local host.
Access Port `SRA_NLP_PORT`	Your data: _____________________________________________________ The default value is `10555.`
Gateway Profile Name `SRA_NLP_GATEWAY_PROFILE`	Your data: _____________________________________________________ The default value is `default.`

Portal Server Secure Remote Access Rewriter Proxy

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Rewriter Proxy Configuration.

Table 4–34 Portal Server Secure Remote Access Rewriter Proxy Configuration Worksheet


Label and State File Parameter	Data
Host Name `SRA_RWP_HOSTNAME`	Your data: _______________________________________________________________ The default value is the name of the local host.
Subdomain `SRA_RWP_SUBDOMAIN`	Your data: _______________________________________________________________ There is no default value.
Domain `SRA_RWP_DOMAIN`	Your data: _______________________________________________________________ The default value is the domain name of the local host.
Host IP Address `SRA_RWP_IPADDRESS`	Your data: _______________________________________________________________ The default value is the IP address of the local host.
Access Port `SRA_RWP_PORT`	Your data: _______________________________________________________________ The default value is `10443.`
Gateway Profile Name `SRA_RWP_GATEWAY_PROFILE`	Your data: _______________________________________________________________ The default value is `default.`

Portal Server Secure Remote Access Certificate

For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Certificate Information.

Table 4–35 Portal Server Secure Remote Access Certificate Configuration Worksheet


Label and State File Parameter	Data
Organization `SRA_CERT_ORGANIZATION`	Your data: _______________________________________________________________
Division `SRA_CERT_DIVISION`	Your data: _______________________________________________________________
City/Locality `SRA_CERT_CITY`	Your data: _______________________________________________________________
State/Province `SRA_CERT_STATE`	Your data: _______________________________________________________________
Country Code `SRA_CERT_COUNTRY`	Your data: _______________________________________________________________ Two-letter country code.
Certificate Database Password `SRA_CERT_PASSWORD`	Your data: _______________________________________________________________ Password (and confirmation) that applies only to self-signed certificates.

Web Proxy Server Configuration Information

For detailed explanations of the fields in this worksheet, refer to the tables under Web Proxy Server Configuration Information.

Table 4–36 Web Proxy Server Administration Configuration Worksheet


Label and State File Parameter	Data
Administrator User ID `WPS_ADMIN_USER`	Your data: _______________________________________________________________ For example: `admin` (default from Common Server Settings)
Administrator Password `WPS_ADMIN_PASSWORD`	Your data: _______________________________________________________________ Default from Common Server Settings.
Proxy Server Domain Name `WPS_PROXY_DOMAIN`	Your data: _______________________________________________________________
Administration Port `WPS_ADMIN_PORT`	Your data: _______________________________________________________________ The default value is: `8888.`
Administration Server Runtime User ID `WPS_ADMIN_RUNTIME_USER`	Your data: _______________________________________________________________ The default value is: `root`.
Instance Runtime UNIX User ID `WPS_INSTANCE_RUNTIME_USER`	Your data: _______________________________________________________________ The default value is: `nobody`
Proxy Instance Port `WPS_INSTANCE_PORT`	Your data: _______________________________________________________________ The default value is: `8080`.
Instance Auto Start Value `WPS_INSTANCE_AUTO_START`	Your data: _______________________________________________________________ The default value is `N`.

Web Server Configuration Information

This section contains worksheets for the following topics:

Web Server Configuration Type

For detailed explanations of the fields in this worksheet, refer to the tables under, Web Server Choice of Configuration Type .

Table 4–37 Web Server Configuration Type Configuration Worksheet


Label and State File Parameter	Data
Configure Admin Instance as Server `WS_ADMIN_IS_SERVER_MODE`	Your data: _______________________________________________________________ The default value is unselected.
Configure Admin Instance as Node `WS_ADMIN_IS_NODE_MODE`	Your data: _______________________________________________________________ The default value is selected.
Automatically start server when system starts `WS_START_ON_BOOT`	Your data: _______________________________________________________________ The default value is `F`.

Web Server Administration Server Settings

For detailed explanations of the fields in this worksheet, refer to the tables under Web Server Administration Server Settings.

Table 4–38 Web Server Administration Server Settings Configuration Worksheet


Label and State File Parameter	Data
Administrator Server User ID `WS_ADMIN_SERVER_USER`	Your data: _______________________________________________________________ The default value is root or the value you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present.
Administrator User ID `WS_LOGIN_USER`	Your data: _______________________________________________________________ The default value is admin or the value you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present.
Administrator Password `WS_LOGIN_PASSWORD`	Your data: _______________________________________________________________ The default value is the value you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present.
Server Host `WS_ADMIN_HOST`	Your data: _______________________________________________________________ The value has the format `hostname`.`domainname`.
SSL Port `WS_ADMIN_SSL_PORT`	Your data: _______________________________________________________________ The default value is `8989`.
HTTP Port `WS_ADMIN_HTTP_PORT`	Your data: _______________________________________________________________ The default value is `8800`.

Web Server Administration Node Settings

For detailed explanations of the fields in this worksheet, refer to the tables under Web Server Administration Node Settings.

Table 4–39 Web Server Administration Node Settings Configuration Worksheet


Label and State File Parameter	Data
Node Host `WS_NODE_HOST`	Your data: _______________________________________________________________ Fully qualified name of host. For example, `mycomputer.example.com`.
SSL Port `WS_NODE_SSL_PORT`	Your data: _______________________________________________________________ The default value is `8989`.
Runtime User ID `WS_INSTANCE_USER`	Your data: _______________________________________________________________ The default value is `root`.
Register Node with Remote Administration Server `WS_REGISTER_NODE`	Your data: _______________________________________________________________ The default value is selected.
Remote Server Host `WS_ADMIN_HOST`	Your data: _______________________________________________________________ Fully qualified domain name of the remote host on which the Administration Server is installed.
Remote Server SSL Port `WS_ADMIN_SSL_PORT`	Your data: _______________________________________________________________ The default value is `8989`.
Remote Server User Name `WS_ADMIN_LOGIN_USER`	Your data: _______________________________________________________________ Administrator user name used to log in to the remote Administration Server.
Remote Server Password `WS_ADMIN_LOGIN_PASSWORD`	Your data: _______________________________________________________________ Password used to log in to the remote Administration Server.

Web Server Instance Settings

For detailed explanations of the fields in this worksheet, refer to the tables under Web Server Instance Settings.

Table 4–40 Web Server Instance Settings Configuration Worksheet


Label and State File Parameter	Data
Server Name `WS_SERVER_NAME`	Your data: _______________________________________________________________ The default value is:`webservd`.
HTTP Port `WS_HTTP_PORT`	Your data: _______________________________________________________________ The default value is: `80`.
Runtime UNIX User ID `WS_SERVER_USER`	Your data: _______________________________________________________________ The default value is: `webservd`.
Document Root Directory `WS_DOCROOT`	Your data: _______________________________________________________________ The default value is: Solaris OS: `/var/opt/SUNWwbsvr7/https:-hostname.domain/docs` Linux and HP-UX: `/var/opt/sun/webserver7/https:-hostname.domain/docs`

Parameters Used Only in State Files Configuration Information

For detailed explanations of the fields in this worksheet, refer to the tables underParameters Used Only in State Files.

Table 4–41 Parameters Used in State Files Configuration Worksheet


Label and State File Parameter	Data
`CCCP_UPGRADE_EXTERNAL_ \` `INCOMPATIBLE_JDK`	Your data: ________________________________________________________ The parameter is case sensitive. The default value is `no`.
`CONFIG_TYPE`	Your data: ________________________________________________________ The default value is `Custom`, called Configure Now.
`DeploymentServer`	Your data: ________________________________________________________ The default value is `AppServer`.
`PSDEPLOYTYPE`	Your data: ________________________________________________________ Permitted values are `IWS`, `SUNONE8`, `WEBLOGIC`, `WEBSPHERE`.
`LOCALE`	Your data: ________________________________________________________ Permitted value is `False.`
`LICENSE_TYPE`	Your data: ________________________________________________________ The permitted values are Evaluation and Deployment, but this field is not used.
`PSP_EXIT_ON_DEPENDENCY_WARNING`	Your data: ________________________________________________________ Permitted values is `No.`
`PSP_LOG_CURRENTLY_INSTALLED`	Your data: ________________________________________________________ Permitted value is `Yes.`
`PSP_SELECTED_COMPONENTS`	Your data: ________________________________________________________ Permitted value `ALL.`