| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Product Notes Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Product Notes Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module Documentation Library |
About This Documentation (PDF and HTML)
Overview of the Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM Product Notes
Supported Software and Firmware
Hardware and Networking Issues
Packet Drop at 1Gb with 100m Cable (6879222)
Special Instructions for Network PXE Booting for the Sun Blade X3-2B Server (7183913)
Cannot Set NEM SP IP Address When NEM Is Powered Off (6938660)
ipmitool Command Fails (6940791)
Prepare-to-Remove and Return-to-Service Does Not Work on NEM ILOM (6948103)
Green Rear SAS Link LEDs All Turn On When Setting Prepare-to-Remove (6950981)
NEM SAS Firmware Updates Must be Performed from the CMM and Not the NEM SP (7020854)
Oracle Linux: Server Module Might Hang When NEM Replaced Repeatedly (6935520)
Oracle Solaris: Virtualized M2 NEM hxge 10 GbE Driver Can Hang Under High Stress (6932684)
Linux: Configuring PCIe Hot Plug in Linux (7075694)
Windows: Incorrect Driver Version Displayed When Driver File Properties is Viewed (7069358)
Changing the state of both the failover and private mode options simultaneously, in either the ILOM web interface or CLI, will result in neither change taking effect. If a blade is subsequently inserted into the chassis, it will neither detect nor configure the NEM Ethernet 10GbE interfaces.
For detailed instructions on enabling failover and private mode, see Enabling Private and Failover Mode in Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 Network Express Module User’s Guide.
|