This chapter lists the configuration parameters for the Messaging Server. These parameters can be set via the configutil command. For a full description and syntax of the configutil command, see configutil Parameters.
For information about configuring the MTA, see Chapter 4, MTA Configuration.
Parameter |
Description |
---|---|
Description for the diskavail alarm. Syntax: string. Default: percentage mail partition diskspace available |
|
Interval in seconds between disk availability checks. Set to 0 to disable checks of disk usage. Syntax: integer. Default: 3600 |
|
Percentage of disk space availability below which an alarm is sent. Syntax: integer. Default: 10 |
|
Specifies whether the alarm is issued when disk space availability is below threshold (-1) or above it (1). Syntax: integer. Default: -1 |
|
Interval in hours between subsequent repetition of disk availability alarms. Syntax: integer. Default: 24 |
|
Machine to which you send warning messages. If you are using LMTP, set this to the machine name of the LMTP host. Syntax: string. Default: localhost |
|
The SMTP port to which to connect when sending alarm messages. Syntax: integer. Default: 25 |
|
Recipient of alarm notice. Syntax: string. Default: postmaster |
|
Address of sender of alarm. Syntax: string. Default: postmaster |
|
Message template. %s in the template is replaced with the following in order: sender, recipient, alarm description, alarm instance, alarm current value and alarm summary text. Syntax: string. Default: From: %s\r\nTo: %s\r\nSubject: ALARM: %s of \"%s\" is %u\r\n\r\n%s\r\n |
|
Description for the serverresponse alarm. Syntax: string. Default: server response time in seconds |
|
Checking interval (seconds). Set to 0 to disable checking of server response. Syntax: integer. Default: 600 |
|
If server response time in seconds exceeds this value, alarm issued. Syntax: integer. Default: 10 |
|
Specifies whether alarm is issued when server response time is greater than (1) or less than (-1) the threshold. Syntax: integer. Default: 1 |
|
Interval in hours between subsequent repetition of server response alarm. Syntax: integer. Default: 24 |
|
Certificate nickname. Syntax: string. Default: Server-Cert |
|
Comma separated list of communication modules. Syntax: string. Default: NULL |
|
Module name for a particular module listed in fmk.comm. Syntax: string. Default: NULL |
|
Log level for all communication modules. Set at least to '6' for informational or '7' for debug logs. Syntax: integer. Default: 6 |
|
Log level for the modules specified in fmk.log.specmodule. Set at least to '6' for informational or '7' for debug logs. Syntax: integer. Default: 0 |
|
A mask indicating the communication modules to debug. See also fmk.log.speclevel, where the log level is set. Syntax: integer. Default: 0 |
|
Location of the server administration resource for end users (obsolete). Syntax: URL. Default: NULL |
|
URL for incoming mail (server side) filter (obsolete). Syntax: URL. Default: NULL |
|
URL for personal folder management (obsolete). Syntax: URL. Default: NULL |
|
Alphabets only, comma separated list (e.g. 'en, fr'). This is identical to RFC-2068 'Accept-Language' definition, but no q-value. (Read-only parameter). Syntax: string. Default: en,de,fr,es,ja,ko,zh-CN,zh-TW |
|
URL for mailing list management (obsolete). Syntax: URL. Default: NULL |
|
Welcome message for new users. The maximum size is 1 MB. Syntax: '$' line separators, with headers. Syntax: string. |
|
Localized welcome message for new users. The maximum size is 1 MB. Syntax: '$' line separators, with headers. Syntax: string. |
|
Default language tag. Syntax: string. Default: en |
|
Enable automatic restart of failed or frozen (unresponsive) servers including IMAP, POP, HTTP, job controller, dispatcher, and MMP servers. Syntax: boolean. Default: no |
|
Failure retry time-out. If a server fails more than once during this designated period of time, then the system will stop trying to restart this server. If this happens in an HA system, Messaging Server is shutdown and a failover to the other system occurs. The value (set in seconds) should be set to a period value longer than the msprobe interval. (See local.schedule.msprobe). Syntax: unsigned integer. Default: 600 |
|
Set the sync level for database transactions. 0: no sync, 1: no sync, 2: write and synchronously flush the log on every transaction commit. Syntax: integer. Default: 0 |
|
Default domain. Syntax: string. Default: defdomain |
|
Enables imsconnutil to provide last log in information. Syntax: boolean. Default: no |
|
Password for end user administrator. Syntax: string. Default: msg.enduser.AdminPassword |
|
User id for end user administrator. Syntax: string. Default: uid=msg-admin-msg.ServerHostName-msg.product.InstallationTimestamp, ou=People, deforgdn |
|
Enable ENS server on start-msg startup. (Restart of all services required). Syntax: boolean. Default: ensEnable |
|
Port (and optionally, a specific IP address) ENS server will listen on, in the format of [address:]port, for example, 7997 or 192.168.1.1:7997. If this is set, local.store.notifyplugin.enshost and local.store.notifyplugin.ensport must also be configured to match. Syntax: string. Default: 7997 |
|
Fully qualified DNS hostname of this mail server. (Read-only parameter). Syntax: string. Default: msg.ServerHostName |
|
Enables imsconnutil on Messenger Express service. (Restart of all services required). Syntax: boolean. Default: off |
|
Force telemetry for all users. Warning: this generates a lot of data and should not be used on a production system. Syntax: boolean. Default: 0 |
|
List of SSL/TLS server certificate nicknames (only one per certificate type) for HTTP to offer clients if SSL/TLS enabled. Overrides encryption.rsa.nssslpersonalityssl. Syntax: string. Default: NULL |
|
Allow admin users to bypass quota enforcement when they append messages to mailboxes with the IMAP APPEND command. Syntax: boolean. Default: off |
|
Enables imsconnutil on IMAP service. (Restart of all services required). Syntax: boolean. Default: off |
|
Whether to fix the IMAP internaldate for appended messages when the client fails to pass a valid date argument. Syntax: boolean. Default: 1 |
|
Force telemetry for all users. Warning: this generates a lot of data and should not be used on a production system. Syntax: boolean. Default: 0 |
|
When set to yes, all changes to flags (message status) are updated in the database on disk immediately, instead of being buffered and updated once in a while. Syntax: boolean. Default: no |
|
Controls the log level for protocol errors. Syntax: unsigned integer. Default: 0 |
|
Maximum number of NOOP commands accepted before connection is forcibly closed. Syntax: unsigned integer. Default: 0 |
|
Maximum number of protocol errors allowed before connection is forcibly closed. Syntax: unsigned integer. Default: 9999 |
|
List of SSL/TLS server certificate nicknames (only one per certificate type) for IMAP to offer clients if SSL/TLS enabled. Overrides encryption.rsa.nssslpersonalityssl. Syntax: string. Default: NULL |
|
Enable imta server on start-msg startup. (Restart of all services required). Syntax: boolean. Default: imtaEnable |
|
Defines the list of hosts used to determine the local host name in direct LDAP lookups. The length limit is 1024. This parameter can be overridden with the LDAP_HOST_ALIAS_LIST MTA option. Syntax: string. Default: NULL |
|
Location of the imta_tailor file for this MTA instance. Syntax: file path name. Default: msg-svr-base/config/imta_tailor |
|
List of comma-delineated LDAP attributes that override the default attributes. These attributes should be email addresses that can be routed. Syntax: string. Default: NULL |
|
Defines the types of LDAP entries that are supported by the MTA (comma-separated list). Syntax: string. Default: ims50 |
|
List of SSL/TLS server certificate nicknames (only one per certificate type) for MTA to offer clients if TLS enabled. Overrides encryption.rsa.nssslpersonalityssl. Syntax: string. Default: NULL |
|
Full pathname of software installation directory. (Required parameter; Read-only parameter). Syntax: file path name. Default: msg-svr-base |
|
Full pathname of server instance directory. (Required parameter; Read-only parameter). Syntax: file path name. Default: msg-svr-base |
|
Last configuration fetch timestamp (in number of seconds since the epoch). (Read-only parameter). Syntax: string. Default: NULL |
|
Default LDAP pool size for authentication. Syntax: integer. Default: 10 |
|
Verify the LDAP server certificate. Syntax: boolean. Default: 1 |
|
Time (in seconds) to wait for a new LDAP connection to complete. Syntax: integer. Default: 60 |
|
Time (in seconds) to wait for LDAP modify operations to complete. Syntax: integer. Default: 60 |
|
Length of time in minutes before LDAP connections are automatically closed then re-established to the LDAP server. Also, length of elapsed time in minutes until the failover directory server reverts back to the primary directory server. If set to -1, don't refresh. Syntax: integer. Default: -1 |
|
Timeout, in seconds, for all LDAP searches using ldappool which do not already have a timeout. Connections which time out while searching are also now removed from the pool, making failover possible if an LDAP load balancer is used. Syntax: integer. Default: 60 |
|
Enable LDAP trace (debug) logging. Syntax: boolean. Default: 0 |
|
Full pathname of server lock directory. (Restart of all services required). Syntax: file path name. Default: msg-svr-base/data/lock |
|
Enable metermaid server on start-msg startup. (Restart of all services required). Syntax: boolean. |
|
Enable JES Monitoring Framework agent on start-msg startup. (Restart of all services required). Syntax: boolean. |
|
Enable mmp server on start-msg startup. (Restart of all services required). Syntax: boolean. Default: mmpEnable |
|
Enable message tracing. Syntax: string. Default: NULL |
|
Allow old IMAP2bis and IMAP4 commands. Syntax: boolean. Default: yes |
|
Force telemetry for all users. Warning: this generates a lot of data and should not be used on a production system. Syntax: boolean. Default: 0 |
|
When set to 1 (on), this parameter limits the number of pop sessions allowed to access a mailbox at a time to one. When set to 0 (off), pop users can access mailboxes in multiple sessions concurrently. Syntax: boolean. Default: 0 |
|
Controls the log level for protocol errors. Syntax: unsigned integer. Default: 0 |
|
Maximum number of protocol errors allowed before connection is forcibly closed. Syntax: unsigned integer. Default: 9999 |
|
List of SSL/TLS server certificate nicknames (only one per certificate type) for POP to offer clients if SSL/TLS enabled. Overrides encryption.rsa.nssslpersonalityssl. Syntax: string. Default: NULL |
|
POP log will show mailbox statistics on login and logout if the value is set to 1. Syntax: boolean. Default: 0 |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of cert server non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of http server non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of imap server non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of job_controller non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of lmtp server non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of pop server non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of smtp server non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Timeout before restart. Syntax: integer. Default: 0 |
|
Number of seconds of submit server non-response before a warning message is logged to the default log file. Syntax: integer. |
|
Specifies the value, in number of seconds, of a warning threshold for all mail services. When the response time of a service (such as IMAP, POP, SMTP, etc.) is longer than the specified number of seconds, msprobe sends a warning message to the default log file. Syntax: integer. Default: 25 |
|
Full pathname of spool directory or local queue directory to be monitored by msprobe. (Read-only parameter). Syntax: file path name. Default: NULL |
|
Allow 8-bit characters in message headers in Messenger Express. If this parameter is set to 'no' or if the 8-bit character is invalid, then the character will be displayed as '?'. Syntax: boolean. Default: no |
|
Character set where improperly encoded 8-bit message headers are interpreted by Messenger Express. Syntax: string. Default: NULL |
|
Specifies two-letter language ID where improperly encoded 8-bit message headers are interpreted by Messenger Express. This parameter must be used in conjunction with the local.rfc822header.fixcharset parameter. Syntax: string. Default: NULL |
|
Enable sched server on start-msg startup. Syntax: boolean. Default: 1 |
|
Set a task run schedule, enabled with local.schedule.*.enable. Uses UNIX crontab format: minute hour day-of-month month-of-year day-of-week command arguments. Syntax: string. Default: NULL |
|
Whether a task should be scheduled. Syntax: boolean. Default: yes |
|
Interval for running imexpire, enabled with local.schedule.expire.enable. Uses UNIX crontab format: minute hour day-of-month month-of-year day-of-week command arguments. Syntax: string. Default: 0 23 * * * sbin/imexpire |
|
Whether the expire task should be scheduled. Syntax: boolean. Default: storeEnable |
|
msprobe run schedule, enabled with local.schedule.msprobe.enable. msprobe is a daemon that probes servers to see if they respond to service requests. Uses UNIX crontab format: minute hour day-of-month month-of-year day-of-week command arguments. Syntax: string. Default: 5,15,25,35,45,55 * * * * lib/msprobe |
|
Whether the msprobe task should be scheduled. Syntax: boolean. Default: 1 |
|
Interval for running imsimta purge, enabled with local.schedule.purge.enable. imsimta purge removes older log files. Uses UNIX crontab format: minute hour day-of-month month-of-year day-of-week command arguments. Syntax: string. Default: 0 0,4,8,12,16,20 * * * sbin/imsimta purge -num=5 |
|
Whether the purge task should be scheduled. Syntax: boolean. Default: imtaEnable |
|
Interval for running return_job, enabled with local.schedule.return_job.enable. Uses UNIX crontab format: minute hour day-of-month month-of-year day-of-week command arguments. Syntax: string. Default: 30 0 * * * lib/return_job |
|
Whether the return_job task should be scheduled. Syntax: boolean. Default: imtaEnable |
|
imdbverify verify snapshots, enabled with local.schedule.snapshotverify.enable. imdbverify is a utility that verifies message store database snapshot backups so the best snapshot can be used in case of an automatic recovery. Syntax: string. Default: 0 0,4,8,12,16,20 * * * sbin/imdbverify -m |
|
Whether the snapshotverify task should be scheduled. Syntax: boolean. Default: storeEnable |
|
Server group id in UNIX. (Read-only parameter). Syntax: string. Default: servergid |
|
Server name. (Required parameter; Read-only parameter). Syntax: string. Default: msg.ServerHostName |
|
Server root. (Required parameter; Read-only parameter). Syntax: file path name. Default: msg-svr-base |
|
Server type. (Required parameter; Read-only parameter). Syntax: string. Default: msg |
|
User id of server in UNIX. (Read-only parameter). Syntax: string. Default: serveruid |
|
Whether webmail users can search the directory. Syntax: boolean. Default: yes |
|
Set this to '0' to disable charset validation on data sent to webmail client (not recommended). Setting this to '0' is a workaround to view messages in webmail that are not labelled with the correct charset (the charset would be set then in the browser), but this will also likely generate Javascript errors and so cannot be recommended. Syntax: boolean. Default: 1 |
|
The cookie name to use to pass the session ID when local.webmail.sso.uwcenabled is set. This defaults to webmailsid if local.webmail.sso.uwcenabled is enabled, and should be left unset if local.webmail.sso.uwcenabled is not enabled. Syntax: string. |
|
Excludes the mgmanhidden attribute from the search filter when set to 0. Syntax: boolean. Default: 1 |
|
If set to '0', webmail will not generate a Received header, which normally contains the IP address of the sender. Syntax: boolean. Default: 1 |
|
Enables (when set to 1) or disables attachment download gzip by default for Internet Explorer clients. Syntax: boolean. Default: 0 |
|
Enables or disables compression of dynamic content (for example: request to *.msc files) delivered to Messenger Express or Communications Express mail clients. This can be disabled if Messenger Express or Communications Express users are getting corrupted content and cannot open their mail pages. Syntax: boolean. Default: yes |
|
Enables or disables compression of static content (for example: HTML files) delivered to Messenger Express or Communications Express mail clients. This can be disabled if Messenger Express or Communications Express users are getting corrupted content and cannot open their mail pages. Syntax: boolean. Default: yes |
|
Set this to 1 on the MEMs and the backend servers to use 5.2 Messaging Express with a 6.x MEM. Syntax: boolean. Default: 0 |
|
A comma-delineated list of LDAP attributes returned to webmail users in a directory search. Syntax: string. Default: NULL |
|
Maximum message size the server collects from a remote POP mailbox. If any message in the mailbox to be collect exceeds this size, the collection will halt when that message is encountered. Syntax: unsigned integer. Default: 104857600 |
|
Sets the maximum LDAP lookup limit. Syntax: unsigned integer. Default: 500 |
|
IP address to which to bind outgoing POP connections when collecting external mail. Defaults to the value of service.listenaddr. Syntax: string. |
|
Back-end store admin login name. Syntax: string. Default: admin |
|
Store admin login name for a specific host if different from local.service.http.proxy.admin. Not configured by default. Syntax: string. Default: NULL |
|
Back-end store admin password. Syntax: string. Default: admin.password |
|
Store admin password for a specific host if different from local.service.http.proxy.adminpass. Not configured by default. Syntax: string. Default: NULL |
|
Configures the port number of the back-end Messenger Express (HTTP) server with the Messaging Multiplexor. Syntax: unsigned integer. Default: 80 |
|
Port number for a specific back-end Messenger Express (HTTP) server if different from local.service.http.proxy.port. Not configured by default. Syntax: string. Default: NULL |
|
Enables webmail's RFC-2231 encoder so that the attachment filename will be encoded in the method defined by RFC-2231. Syntax: boolean. Default: no |
|
Shows unread count in parentheses after the folder name. Setting this parameter affects server performance. Syntax: boolean. Default: 0 |
|
Password for end user AUTH SMTP user. Syntax: string. Default: NULL |
|
User id for end user AUTH SMTP user. This parameter allows someone using Messenger Express to receive the same authenticated SMTP messages that they would normally receive using another web browser. In order for this to work, the user ID and password given to mshttpd must be a store administrator. After setting these parameters, any mail received from a local user should have the word 'Internal' appearing next to the 'From:' header in the Message View window. Syntax: string. Default: NULL |
|
If this is set to '1', webmail will use a message's Date: header for the date the message was received. If set to '0', webmail will use the date the message arrived in the user's mailbox, which is considered more accurate. Syntax: boolean. Default: 0 |
|
Override X-Mailer header with this string. Syntax: string. Default: NULL |
|
1 if PAB host is active, 0 otherwise. Syntax: integer. |
|
Enables one PAB server to be used (overriding hostname in PAB URIs). Syntax: boolean. Default: no |
|
Add new attributes to a personal address book entry. With this parameter, you can create an attribute that does not already exist. Syntax: string. Default: pabattrs |
|
Index of default host. Syntax: integer. Default: 0 |
|
Enable or disable PAB feature. Syntax: boolean. Default: 1 |
|
Base DN for PAB searches. Syntax: string. Default: service.pab.ldapbasedn |
|
Bind DN for PAB searches. Syntax: string. Default: uid=msg-admin-msg.ServerHostName-msg.product.InstallationTimestamp, ou=People, deforgdn |
|
Hostname where Directory Server for PAB resides. Syntax: string. Default: ugldaphost |
|
Password for user specified by local.service.pab.ldapbinddn. Syntax: string. Default: msg.enduser.AdminPassword |
|
Port number of the PAB Directory Server. Syntax: unsigned integer. Default: ugldapport |
|
Use SSL to connect to the PAB Directory Server. Syntax: boolean. Default: 0 |
|
Maximum number of entries a single PAB can store. Syntax: unsigned integer. Default: 500 |
|
Enables PAB migration when set to on. Syntax: boolean. Default: no |
|
Number of PAB servers (up to a maximum of 16). Syntax: unsigned integer. Default: 1 |
|
Default store admin login name. (Restart of HTTP service required; Restart of IMAP service required). Syntax: string. Default: admin |
|
Store admin login name for a specific host if different from local.service.proxy.admin. Not configured by default. Syntax: string. Default: NULL |
|
Default store admin password. (Restart of HTTP service required; Restart of IMAP service required). Syntax: string. Default: admin.password |
|
Store admin password for a specific host if different from local.service.proxy.adminpass. Not configured by default. Syntax: string. Default: NULL |
|
Default IMAP port number for backend store servers. (Restart of HTTP service required; Restart of IMAP service required). Syntax: integer. Default: 143 |
|
IMAP port number for a specific backend store server. (Restart of HTTP service required; Restart of IMAP service required). Syntax: integer. Default: 143 |
|
Enable SSL access to backend store servers. Defaults to 1 if backend store IMAP port is 993, and 0 otherwise. (Restart of HTTP service required; Restart of IMAP service required). Syntax: boolean. |
|
Message store server list. Takes a space-separated string. Not configured by default. Syntax: string. Default: NULL |
|
Enable sms server on start-msg startup. Syntax: boolean. Default: 0 |
|
Run SMS Gateway Server in the foreground with debugging enabled. Syntax: integer. |
|
Cache entry time to live in seconds. ( Syntax: integer. Default: 30 |
|
SNMPv3 context name to register this instance's MIBs under; the default value is the value of service.defaultdomain. ( Syntax: string. |
|
Traverse on-disk channel queues for .HELD files and to update information on oldest queued message files. ( Syntax: boolean. Default: 1 |
|
Start the snmp subagent on start-msg startup. ( Syntax: boolean. Default: 0 |
|
Register this instance's MIBs under an SNMPv3 context name. ( Syntax: boolean. Default: 0 |
|
The IP address to listen on when running as a SNMP master agent. ( Syntax: string. Default: INNADDR_ANY |
|
UDP port to listen on when running as a SNMP master agent. ( Syntax: unsigned integer. Default: 161 |
|
Maximum number of seconds to wait for each step in probing a server (connect to, read from, write to, etc.). ( Syntax: integer. Default: 5 |
|
Run as a standalone SNMP agent when set to 1 or 'true'. ( Syntax: boolean. Default: 0 |
|
Adjust which SSL cipher suites are enabled or disabled. Syntax: string. Default: NULL |
|
Specifies the location of certificates and key files. Syntax: file path name. Default: NULL |
|
Specifies the prefixes of the certificate and key files. Syntax: string. Default: NULL |
|
This is a trusted circle SSO (legacy) parameter. It sets the verify URL values for peer SSO applications. '*' is the application ID of a peer SSO application whose SSO cookies are to be honored. The standard form of the value of the verify URL is http://[peer_hostname]:[port]/VerifySSO?. Syntax: string. Default: NULL |
|
Specifies mailboxes to be excluded from a backup operation. You can specify a single mailbox or a list of mailboxes separated by the '%' character. Syntax: string. Default: NULL |
|
Directory for backup image of message store data. Syntax: file path name. Default: NULL |
|
Stops messages from being delivered to a message store partition when the partition fills more than a specified percentage of available disk space. If disk usage goes higher than the specified threshold, the store daemon locks the partition, logs a message to the default log files, and sends an email notification to the postmaster. When disk usage falls below the threshold, the partition is unlocked, and messages are again delivered to the store. Syntax: integer. Default: 1 |
|
Enable checking that the user mailhost attribute matches this server. Syntax: boolean. Default: 1 |
|
The number of mboxlist db caches. If it is 0 or 1, the cache will be allocated contiguously in memory. If it is greater than 1, the cache will be broken up into ncache equally sized, separate pieces of memory. Syntax: unsigned integer. Default: 1 |
|
If this is set to 'yes', cached database information will be flushed to disk before the database file is closed. Syntax: boolean. Default: no |
|
Sets whether all or just one thread resolves deadlock. Syntax: boolean. Default: no |
|
Specifies the sleep length (in microseconds) before lock_detect is set again. Syntax: unsigned integer. Default: 1000 |
|
Specifies the disk-usage threshold for the partition-monitoring feature. (For details about this feature, see local.store.checkdiskusage). The value of local.store.diskusagethreshold is a percentage from 1 to 99. Syntax: unsigned integer. Default: 99 |
|
Enables the store when starting services. Syntax: boolean. Default: storeEnable |
|
By default, the store grants list and administer rights to a folder's owner. If this parameter is set to '0', however, then these owner rights can be removed in order to create hidden folders. Syntax: boolean. Default: 1 |
|
For backward compatibility. Perform purge only, do not perform imexpire. Syntax: boolean. Default: false |
|
Specify a log level: 0: no log. 1: log summary for the entire expire session. 2: log one message per mailbox expired. 3: log one message per message expired. Syntax: unsigned integer. Default: 0 |
|
Sync level for store expunge file. 0: no sync, 1: data sync only, 2: data sync and metadata sync (that is, all file attributes, including access time and modification time). Syntax: unsigned integer. Default: 1 |
|
Perform a final checkpoint of the transaction log before closing the mailbox list database. Syntax: boolean. Default: no |
|
Sync level for store index file. 0: no sync, 1: data sync only, 2: data sync and metadata sync (that is, all file attributes, including access time and modification time). Syntax: unsigned integer. Default: 1 |
|
When set to '1', implicitly shared folders will appear in lists performed by store admins. Syntax: boolean. Default: 0 |
|
Specifies how LIST command is done in respects to recovery. Syntax: string. Default: NULL |
|
If set to 'yes', expunge details will be logged. Syntax: string. Default: NULL |
|
Specifies a maximum number of folders. Set to 0 for infinite. Syntax: integer. Default: 0 |
|
Specifies the maximum number of allowable accumulated database transaction log files before the server is deemed unhealthy, after which msprobe will trigger a restart of stored. Syntax: unsigned integer. Default: 50 |
|
Specifies a maximum number of messages per folder. Syntax: integer. |
|
Sync level for store message file. 0: no sync, 1: data sync only, 2: data sync and metadata sync (that is, all file attributes, including access time and modification time). Syntax: unsigned integer. Default: 1 |
|
Full pathname and command line arguments (preceded by a '$' character) for message typing plugin. Syntax: string. Default: NULL |
|
Enable notifications via the Event Notification Service and/or JMQ by specifying the absolute path name to libibiff and/or libjmqnotify here. Each library name should be followed by a parameter preceded by a '$' character. Each library/parameter pair should be separated from the next by a '$' character. The parameter is meaningless for the libibiff plugin, but is the name for the libjmqnotify plugin. Several libjmqnotify plugings may be specified with different parameter. The name given in the parameter field for each specified the name used to look up the configuration for the plugin. Syntax: string. Default: NULL |
|
Level of debugging messages for JMQ notification plugin. Syntax: integer. Default: 0 |
|
Specifies whether DeleteMsg events will generate a notification to JMQ. Syntax: integer. Default: 1 |
|
JMQ destination type, queue or topic. Syntax: string. Default: topic |
|
The hostname of the JMQ broker. Syntax: string. Default: 127.0.0.1 |
|
The port number of the JMQ broker. Syntax: integer. Default: 7676 |
|
The JMQ user password. Syntax: string. Default: guest |
|
The topic or queue to which JMQ will publish events (overrides local.store.notifyplugin.*.jmqtopic if set). Syntax: string. |
|
The topic or queue to which JMQ will publish events. Syntax: string. Default: JES-MS |
|
The JMQ username. Syntax: string. Default: guest |
|
Specifies whether LogUser events will generate a notification to JMQ. Syntax: integer. Default: 1 |
|
Specifies the maximum size (in bytes) of the body that will be transmitted with the notification to JMQ. Syntax: integer. Default: 0 |
|
Specifies the maximum size (in bytes) of the header that will be transmitted with the notification to JMQ. Syntax: integer. Default: 0 |
|
Enables the msgflag notification mechanism. The local.store.notifyplugin.msgflag option must also be selected before any msgflags notifications will be generated. Syntax: integer. Default: 0 |
|
Specifies whether NewMsg events will generate a notification to JMQ. Syntax: integer. Default: 1 |
|
Determines whether all folders generate notifications or if only the INBOX generates notifications to JMQ: 0: only INBOX, 1: all folders. Syntax: integer. Default: 0 |
|
Specifies whether persistent JMQ messages are to be used. Syntax: boolean. Default: 1 |
|
The priority to be used for JMQ notification messages. Syntax: integer. Default: 4 |
|
Specifies whether PurgeMsg events will generate a notification to JMQ. Syntax: integer. Default: 1 |
|
Specifies whether ReadMsg events will generate a notification to JMQ. Syntax: integer. Default: 1 |
|
The time-to-live for JMQ messages. 0 means no timeout. Syntax: unsigned integer. Default: 0 |
|
Specifies whether UpdateMsg events will generate a notification to JMQ. Syntax: integer. Default: 1 |
|
Level of debugging messages for ibiff plugin. Syntax: unsigned integer. Default: 0 |
|
Specifies whether DeleteMsg events will generate a notification to ENS. Syntax: boolean. Default: 1 |
|
Specifies the event key to use for ENS notifications. The hostname portion of the event key is not used to determine the ENS host. It is simply a unique identifier used by ENS. This key is what the subscriber should subscribe to in order to be notified of events matching this key. Syntax: string. Default: enp://127.0.0.1/store |
|
The IP address or hostname of the ENS server. This must correspond to the setting in local.ens.port. Syntax: string. Default: 127.0.0.1 |
|
The TCP port for the ENS server. This must correspond to the setting in local.ens.port. Syntax: unsigned integer. Default: 7997 |
|
If set to 1, then message headers will be included in DeleteMsg notifications. local.store.notifyplugin.*.maxheadersize must also be non-zero. Syntax: integer. Default: 0 |
|
Specifies whether LogUser events will generate a notification to ENS. Syntax: boolean. Default: 1 |
|
Specifies the maximum size (in bytes) of the body that will be transmitted with the notification to ENS. Syntax: unsigned integer. Default: 0 |
|
Specifies the maximum size (in bytes) of the header that will be transmitted with the notification to ENS. Syntax: unsigned integer. Default: 0 |
|
Enables the msgflag notification mechanism. This parameter must be set as well an any plugin specific flag for this notification to be generated. Syntax: integer. Default: 0 |
|
Specifies whether NewMsg events will generate a notification to ENS. Syntax: boolean. Default: 1 |
|
Determines whether all folders generate notifications or if only the INBOX generates notifications to ENS: 0: only INBOX, 1: all folders. Syntax: boolean. Default: 0 |
|
Specifies whether PurgeMsg events will generate a notification to ENS. Syntax: boolean. Default: 1 |
|
Specifies whether ReadMsg events will generate a notification to ENS. Syntax: boolean. Default: 1 |
|
Specifies whether UpdateMsg events will generate a notification to ENS. Syntax: boolean. Default: 1 |
|
Enable quota enforcement before messages are enqueued in the MTA. This prevents the MTA queues from filling up. When set, and a user is not yet over quota, but an incoming message pushes the user over quota, then the message is delivered, but the mailuserstatus LDAP attribute is set to overquota so no more messages will be accepted by the MTA. Syntax: boolean. Default: 0 |
|
Sync level for store peruser file. 0: no sync, 1: data sync only, 2: data sync and metadata sync (that is, all file attributes, including access time and modification time). Syntax: unsigned integer. Default: 1 |
|
Mailboxes to protect from deletion or modification except by the Message Store Administrator. The format is as follows: 'mailbox1%mailbox2%mailbox 3', where mailbox1, mailbox2 and mailbox 3 are the mailboxes to be protected (note that spaces can be used in mailbox names), and % is the separator between each mailbox. Syntax: string. Default: NULL |
|
Used to provide compatibility with systems that migrated from the Netscape Messaging Server. When set to 'on', allow delivery of one message that puts disk usage over quota. After the user is over quota, messages are deferred or bounced, the quota warning message is sent, and the quota grace period timer starts. Treated as 'on' if local.store.overquotastatus is set. Syntax: boolean. Default: off |
|
Enables real-time re-linking of messages in the append code, and stored purge. The relinker command-line tool may be run even if this option is off, however since stored will not purge the repository, relinker -d must be used for this task. Turning this option on affects message delivery performance in exchange for the disk space savings. Syntax: boolean. Default: no |
|
Maximum age in hours for messages to be kept in the repository, or considered by the relinker command-line. -1 means no age limit, that is, only purge orphaned messages from the repository. For relinker it means process existing messages regardless of age. Shorter values keep the repository smaller thus allow relinker or stored purge to run faster and reclaim disk space faster, while longer values allow duplicate message re-linking over a longer period of time, for example, when users copy the same message to the store several days apart, or when running a migration over several days or weeks. Syntax: integer. Default: 24 |
|
Minimum size in kilobytes for messages to be considered by run-time or command-line relinker. Setting a non-zero value gives up the relinker benefits for smaller messages in exchange for a smaller repository. Syntax: unsigned integer. Default: 0 |
|
Approximate duration in hours of an entire stored purge cycle. The actual duration depends on the time it takes to scan each directory in the repository. Smaller values will use more I/O and larger values will not reclaim disk space as fast. 0 means run purge continuously without any pause between directories. -1 means don't run purge in stored (then purge must be performed using the relinker -d command). Syntax: unsigned integer. Default: 24 |
|
Set peruser db archive interval (in number of hours). Set to '0' to disable peruser archiving. Syntax: unsigned integer. Default: 6 |
|
Set initial hour of the peruser db archive after stored starts running. Allowed values are 0 (midnight) - 23 (11PM). If this variable is not set, the initial archive starts an hour after stored starts running. Syntax: unsigned integer. |
|
Disables listing of shared folders with '*' as its pattern. You can still select the shared folder, but you cannot list it with a '*'. Syntax: boolean. Default: 1 |
|
Number of separate snapshots to store on disk. Minimum is 2. Recommend enough to be sure you have a good database back by the time you figure out the current one is beyond repair. Syntax: string. Default: 3 |
|
Interval of time between snapshots in minutes. It is recommended that you perform this procedure at least once a day. Syntax: string. Default: 1440 |
|
Specifies the path in which to copy the mboxlist directory. Permissions must be set for the message store owner. Snapshots will be placed in subdirectories. Syntax: file path name. Default: dbdata/snapshots |
|
Sync level for store subscribe file. 0: no sync, 1: data sync only, 2: data sync and metadata sync (that is, all file attributes, including access time and modification time). Syntax: unsigned integer. Default: 1 |
|
Default sync level for store files. -1: no default, 0: no sync, 1: data sync only, 2: data sync and metadata sync (that is, all file attributes, including access time and modification time). Syntax: integer. Default: -1 |
|
Languages supported by server code. (Read-only parameter). Syntax: string. Default: [en,de,fr,es,af,ca,da,nl,fi,gl,ga,is,it,no,pt,sv,eu,sq,cs,hu,pl,ro,hr,sk,sl,et,lv,lt,ru,bg,be,sr,mk,uk,el,tr,ar,he,yi,th,ja,ko,zh-CN,zh-TW] |
|
Set a thread hold delay time (in milliseconds) for IMAP and POP connections. This is the amount of time that asynchronous read and write operations will try to keep a worker thread around. Syntax: unsigned integer. Default: 75 |
|
Temporary file directory. (Read-only parameter). Syntax: file path name. Default: msg-svr-base/data/tmp |
|
Root of the user/group configuration tree in the Directory Server. (Required parameter; Restart of all services required). Syntax: string. Default: ugldapbasedn |
|
Password for the user/group administrator. (Restart of all services required). Syntax: string. Default: msg.enduser.AdminPassword |
|
DN of the user/group administrator. (Restart of all services required). Syntax: string. Default: uid=msg-admin-msg.ServerHostName-msg.product.InstallationTimestamp, ou=People, deforgdn |
|
LDAP server for user/group lookup. (Required parameter; Restart of all services required). Syntax: string. Default: ugldaphost |
|
Default LDAP pool size. Syntax: integer. Default: 1 |
|
LDAP port for user/group lookup. (Restart of all services required). Syntax: unsigned integer. Default: ugldapport |
|
Use SSL to connect to user/group LDAP server. (Restart of all services required). Syntax: boolean. Default: no |
|
Enable watcher on start-msg startup. watcher is a daemon that monitors Messaging Server and restarts services that fail. Refer to local.autorestart and the Sun Java System Messaging Server Administration Guide for details. Syntax: boolean. Default: yes |
|
watcher listen port. Syntax: unsigned integer. Default: 49994 |
|
Verify certificates against a CRL. When this is set, ensure that the crlenable parameter in the smime.conf is set to 1. Syntax: boolean. Default: no |
|
Specifies a port number on the machine where the Messaging Server runs to use for CRL communication. This port is used locally for that machine only. The value must be greater than 1024. Syntax: integer. Default: 55443 |
|
Delegated Administrator hostname. Syntax: string. Default: msg.ServerHostName |
|
Delegated Administrator port. Syntax: integer. Default: 8080 |
|
The port of the web container where the Mail Filter has been deployed. Syntax: string. Default: NULL |
|
The SSL port of the web container where the Mail Filter has been deployed. Syntax: string. Default: NULL |
|
If not set to 0, this value will override the value of local.webmail.cert.port. Syntax: integer. Default: 0 |
|
Controls whether the S/MIME features are available to Communications Express Mail users who have permission to use them. (Restart of HTTP service required; Restart of CERT service required). Syntax: boolean. Default: no |
|
The nickname of the client certificate in the certificate file database. Syntax: string. Default: NULL |
|
Password for the certificate key database file. Syntax: string. Default: NULL |
|
Access Manager cookie name. By default Access Manager saves its session handle in a cookie called iPlanetDirectoryPro. If Access Manager is configured to use another cookie name, then that name needs to be configured in Messaging Server as local.webmail.sso.amcookiename so that Messaging Server knows what to look for when doing single-sign on. Default value must not be changed if Access Manager has default configuration. Syntax: string. Default: iPlanetDirectoryPro |
|
AMSDK logging level. The SSO library used by Messaging Server has its own logging mechanism separate from Messaging Server. Its messages are logged in a file called http_sso under msg-svr-base/log. By default only messages with info (3) or higher are logged, but it is possible to increase the logging level by setting the logging level to a value from 1 to 5 (1: errors, 2: warnings, 3: info, 4: debug, 5: maxdebug). Be aware that the library doesn't have the same notion of message importances as Messaging Server and that setting the level to debug (4) can result in a lot of meaningless data. Also the http_sso log file is not managed by common Messaging Server logging code and is never cleaned up or rolled over. It is the responsibility of the system administrator to clean it up when setting the log level higher than the default. Syntax: integer. Default: 3 |
|
The URL to which /am_listener should be appended to construct the Access Manager notification URL. Syntax: URL. Default: NULL |
|
The URL where Access Manager runs the naming service. Mandatory variable for single sign-on through Access Manager. Typically this URL is http://[server]:[port]/amserver/namingservice. Syntax: URL. Default: NULL |
|
Whether to trust SSL certificates not in the client certificate file database. Syntax: boolean. Default: 0 |
|
This is a trusted circle SSO (legacy) parameter. The string value of this parameter is used to set the cookie domain value of all SSO cookies set by the Messenger Express HTTP server. This domain must match the DNS domain used by the Messenger Express browser to access the server. It is not the hosted domain name. This value must start with a period. Syntax: string. Default: NULL |
|
Enable (legacy) trusted circle single sign on functions, including accepting and verifying SSO cookies presented by the client when the login page is fetched. It returns an SSO cookie to the client for a successful login and responds to requests from other SSO partners to verify its own cookies. Set this to zero to disable trusted circle SSO, for example when using Access Manager SSO. Syntax: boolean. Default: 0 |
|
This is a trusted circle SSO (legacy) parameter. The string value of this parameter is used as the application ID value when formatting SSO cookies set by the Messenger Express HTTP server. The default value is null. This is an arbitrary string. Its value must match what you specify for the Delegated Administrator in its resource.properties file. The corresponding entry in resource.properties would be: Verificationurl-XXX-YYY = http://webmailhost:webmailport/VerifySSO? Where XXX is the local.webmail.sso.prefix value set above, and YYY is the value of local.webmail.sso.id set here. Syntax: string. Default: NULL |
|
This is a trusted circle SSO (legacy) parameter. It specifies the prefix value when formatting SSO cookies set by the webmail server. Only SSO cookies with this prefix value are recognized by the server; all other SSO cookies are ignored. Syntax: string. Default: NULL |
|
Single sign-off from Messaging Server to Access Manager. Access Manager is the central authentication authority, and single sign-off is always enabled from Access Manager to Messaging Server. This option allows a site to configure whether the logout button in webmail should also log the user out of Access Manager (saving some customization work). By default this is enabled. If this is disabled, a user logging out of the default webmail client is automatically logged back in since logout refers to the root document and the root document refers to the INBOX display as long as the Access Manager cookie exists and is valid. Therefore, a site choosing to disable this option needs to customize what happens at webmail logout. This parameter is also used by trusted circle SSO (legacy). When this parameter is set in this context, the server will remove all single sign-on cookies for the user matching the value of local.webmail.sso.prefix. If set to 0 in this context, the server removes only its single sign-on user cookie. Syntax: boolean. Default: 1 |
|
Specifies the path in which Communications Express is deployed. Specify this parameter only when Communications Express is not deployed under /. For example, if Communications Express is deployed in /uwc, local.webmail.sso.uwccontexturi=uwc. Syntax: string. Default: NULL |
|
Enables (when set to 1) or disables (when set to 0) Communications Express access to Messenger Express. When enabled, the session ID will be passed in a cookie with the name of the value of local.service.http.cookiename (if set) or webmailsid if local.service.http.cookiename is not set. Both local.webmail.sso.uwcenabled and local.service.http.cookiename must match on the front and back ends. Syntax: integer. Default: 0 |
|
Specifies the URL required to access the home link. Syntax: string. Default: NULL |
|
Specifies the URL Messenger Express uses to invalidate the Communications Express session. Syntax: URL. Default: NULL |
|
Specifies the Communications Express port. Syntax: integer. Default: 80 |
|
Specifies the Communications Express SSL port. Syntax: integer. Default: 443 |
|
Size of admin log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time an admin log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to admin log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for admin log files. Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an admin log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of admin log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each admin log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all admin log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for admin logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the admin log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not admin logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of default log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time a default log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to default log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for default log files. (Restart of all services required). Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an default log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of default log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each default log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all default log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for default logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the default log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not default logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of HTTP log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time an HTTP log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to HTTP log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for HTTP log files. (Restart of HTTP service required). Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an HTTP log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of HTTP log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each HTTP log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all HTTP log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for HTTP logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the HTTP log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not HTTP logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of IMAP log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time an IMAP log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to IMAP log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for IMAP log files. (Restart of IMAP service required). Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an IMAP log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of IMAP log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each IMAP log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all IMAP log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for IMAP logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the IMAP log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not IMAP logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of MTA log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time an MTA log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to MTA log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for MTA log files. Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an MTA log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of MTA log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each MTA log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all MTA log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for MTA logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the MTA log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not MTA logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of MeterMaid log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time an MeterMaid log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to MeterMaid log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for MeterMaid log files. (Restart of IMAP service required). Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an MeterMaid log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of MeterMaid log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each MeterMaid log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all MeterMaid log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for MeterMaid logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the MeterMaid log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not MeterMaid logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of message trace log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time a message trace log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to message trace log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for message trace log files. Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify a message trace log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of message trace log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each message trace log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all message trace log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for message trace logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the message trace log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not message trace logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of POP log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time a POP log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to POP log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for POP log files. (Restart of POP service required). Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an POP log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of POP log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each POP log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all POP log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for POP logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the POP log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not POP logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
Size of SNMP log buffers in bytes. Syntax: unsigned integer. Default: 0 |
|
Maximum time an SNMP log file is kept (in seconds). Syntax: unsigned integer. Default: 604800 |
|
Time interval for flushing buffers to SNMP log files (in seconds). Syntax: unsigned integer. Default: 60 |
|
Directory path for SNMP log files. (Restart of IMAP service required). Syntax: file path name. Default: msg-svr-base/data/log |
|
Specify an SNMP log level. One of Nolog, Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug. Syntax: string. Default: Notice |
|
Ignored. Set to either NscpLog or syslog. (Read-only parameter). Syntax: string. Default: NscpLog |
|
Maximum number of SNMP log files. Syntax: unsigned integer. Default: 10 |
|
Maximum size (bytes) of each SNMP log file. Syntax: unsigned integer. Default: 2097152 |
|
Maximum size of all SNMP log files. Syntax: unsigned integer. Default: 20971520 |
|
Minimum amount of free disk space (bytes) that must be available for SNMP logging. Syntax: unsigned integer. Default: 5242880 |
|
The frequency in which to rotate the SNMP log file (in seconds). Syntax: unsigned integer. Default: 86400 |
|
Specifies whether or not SNMP logging goes to syslog. The values can be user, mail, daemon, local0 to local7, or none. If the value is set, messages are logged to the syslog facility corresponding to the set value and all other log file service options are ignored. Syntax: string. Default: none |
|
IP address on which MeterMaid should listen. Syntax: string. Default: INADDR_ANY |
|
Maximum number of work threads. Syntax: unsigned integer. Default: 10 |
|
Port number on which MeterMaid listens for connections. Syntax: TCP port number. Default: 63837 |
|
Secret used to authenticate MeterMaid clients with the server. Syntax: string. Default: NULL |
|
Host where the MeterMaid server is running. Syntax: string. Default: NULL |
|
Attempt a connection every connectfrequency seconds. Syntax: unsigned integer. Default: 15 |
|
How long a thread should wait for a connection to be established to MeterMaid. Syntax: unsigned integer. Default: 5 |
|
Enables debug output from the MTA client into SMTP log files. Syntax: boolean. Default: off |
|
How many concurrent connections can be established to MeterMaid from a single process. Syntax: unsigned integer. Default: 3 |
|
How long in seconds to wait for communication with MeterMaid. Syntax: unsigned integer. Default: 10 |
|
Type of data to be stored in this table; one of ipv4 or string. Syntax: string. Default: string |
|
Maximum number of entries to maintain in this table. Syntax: unsigned integer. Default: 1000 |
|
Comma-separated list of options for this table; can include penalize or nocase (for string data). Syntax: string. Default: NULL |
|
Number of connections to permit per quota_time. Syntax: unsigned integer. Default: 100 |
|
Number of seconds to allow quota. Syntax: unsigned integer. Default: 60 |
|
Method of data storage for this table; one of hash or splay. Syntax: string. Default: hash |
|
The type of table; only throttle is supported now. Syntax: string. Default: throttle |
|
Program delivery path specification. Syntax: string. Default: NULL |
|
Program delivery arguments. Syntax: string. Default: NULL |
|
Program delivery execution option. Syntax: string. Default: NULL |
|
Policy store module name. Syntax: string. Default: policy_store_ldap |
|
Presence store module name. Syntax: string. Default: presence_store_simple |
|
Pubsub store module name. Syntax: string. Default: pubsub_store_simple |
|
When set and a user provides a plain text password, the password storage format will be transitioned to the default password storage method for the directory server. This can be used to migrate from plaintext passwords to APOP or CRAM-MD5. Syntax: boolean. Default: false |
|
Look up domains prior to locating users when performing authentication. If disabled, then search the entire user/group subtree when authenticating a user. Syntax: boolean. Default: 1 |
|
Boolean to indicate directory stores plaintext passwords which enables APOP and CRAM-MD5. Syntax: boolean. Default: false |
|
This is the default search filter used to look up users when one is not specified in the inetDomainSearchFilter for the domain. The syntax is the same as inetDomainSearchFilter (see schema guide). Syntax: string. Default: (&(uid=%U)(objectclass=inetmailuser)) |
|
By default, the authentication system looks up the domain in LDAP following the rules for domain lookup then looks up the user. However, if this option is set to '0' rather than the default value of 1', then the domain lookup does not happen and a search for the user (using the sasl.default.ldap.searchfilter) occurs directly under the LDAP tree specified by local.ugldapbasedn. This is provided for compatibility with legacy single-domain schemas, but use is not recommended for new deployments as even a small company may go through a merger or name change which requires support for multiple domains. Syntax: boolean. Default: yes |
|
A space-separated list of SASL mechanisms to enable. If non-empty, this overrides the sasl.default.ldap.has_plain_passwords option as well as the service.imap.allowanonymouslogin option. This option applies to all protocols (IMAP, POP, SMTP). Syntax: string. Default: NULL |
|
The number of concurrent users/entries in the cache during the service.authcachettl time interval. The unit is in 'entries' and each entry takes 60 bytes. (Restart of all services required). Syntax: unsigned integer. Default: 10000 |
|
The amount of time (in seconds) an authentication cache entry will remain in the cache. Set to 0 to disable authentication caching. (Restart of all services required). Syntax: unsigned integer. Default: 900 |
|
Root of DC tree in Directory Server. (Restart of all services required). Syntax: string. Default: msg.dctree.Suffix.1 |
|
Messaging Server default domain. This is used to determine whether a domain is the default domain or a hosted domain. (Required parameter; Restart of all services required). Syntax: string. Default: defdomain |
|
Sets whether or not to reverse name lookup client host. Syntax: boolean. Default: no |
|
Enable/disable experimental LDAP SDK memcache feature (not recommended). Syntax: boolean. Default: 0 |
|
This enables the SASL ANONYMOUS mechanism. Syntax: boolean. Default: no |
|
Maximum number of connections per IP address. The syntax is: 'realm1,realm2,...' where a realm has the form of address ranges and maximum number of connections expressed as: 'IP|MASK:NUM'. There should be at least 1 realm of the form: '0.0.0.0|0.0.0.0:n' to cover the default case. Syntax: string. Default: NULL |
|
List of domains and/or IP addresses allowed HTTP access. Syntax: string. Default: NULL |
|
List of domains and/or IP addresses not allowed HTTP access. Syntax: string. Default: NULL |
|
Enable http server on start-msg startup (note: HTTP over SSL service is enabled/disabled separately using service.http.enablesslport). (Restart of HTTP service required). Syntax: boolean. Default: webmailEnable |
|
Sets whether or not the HTTP over SSL service is started. If both service.http.enable and service.http.enablesslport are turned off, then stored does not try to monitor http. (Restart of HTTP service required). Syntax: boolean. Default: no |
|
Extra LDAP attributes returned to client (for customization). Syntax: attrname[:w][,attrname]... (:w if read-write attribute). (Restart of HTTP service required). Syntax: string. Default: NULL |
|
If set, use the cn and mail attributes from the user's LDAP entry to build the 'From:' header for outgoing messages. If not set, expect the MTA to rewrite the 'From:' header. Syntax: boolean. Default: yes |
|
Timeout, in minutes, for the low-level HTTP connection (which is different from the webmail session). Lower values will use fewer socket handles and higher values cause less overhead when the client needs to recreate the connection. Syntax: unsigned integer. Default: 3 |
|
Sets whether or not to restrict session access to login IP addresses. If set to yes, when the user logs in, the server remembers which IP address the user used to log in. Then it only allows that IP address to use the session cookie it issues to the user. Syntax: boolean. Default: yes |
|
Default LDAP pool size. Syntax: integer. Default: 1 |
|
Maximum message size client is allowed to send. Syntax: unsigned integer. Default: 5242880 |
|
Maximum HTTP post content length. Syntax: unsigned integer. Default: 5242880 |
|
Maximum number of sessions per server process. (Restart of HTTP service required). Syntax: unsigned integer. Default: 6000 |
|
Maximum number of threads per server process. (Restart of HTTP service required). Syntax: unsigned integer. Default: 250 |
|
Number of HTTP server processes. (Restart of HTTP service required). Syntax: unsigned integer. Default: 1 |
|
If this is > 0, then disable use of plaintext passwords unless a security layer (SSL or TLS) is activated. This forces users to enable SSL or TLS on their client to login which prevents exposure of their passwords on the network. Syntax: integer. Default: 0 |
|
Messenger Express HTTP port. (Restart of HTTP service required). Syntax: unsigned integer. Default: 80 |
|
Time, in seconds, after which mshttpd flushes cached session data from memory. Lower values will use less memory and higher values incur less overhead from resynchronizing from the session database. For correct session expiration this timeout is never higher than half the session timeout (mshttpd enforces this). Syntax: unsigned integer. Default: 900 |
|
Webmail client session timeout in seconds. Syntax: unsigned integer. Default: 7200 |
|
SMTP relay host. If you are using LMTP, set this to the machine name of the LMTP host. Syntax: string. Default: NULL |
|
SMTP relay port. Syntax: unsigned integer. Default: 25 |
|
URL of webmail server. Syntax: URL. Default: NULL |
|
Attachment spool directory for client outgoing mail. (Restart of HTTP service required). Syntax: file path name. Default: msg-svr-base/data/http |
|
Number of SSL sessions to be cached. (Restart of HTTP service required). Syntax: unsigned integer. Default: 0 |
|
HTTP over SSL port number. (Restart of HTTP service required). Syntax: unsigned integer. Default: 443 |
|
URL of webmail server. Syntax: URL. Default: NULL |
|
Sets whether or not to enable SSL. The initial value for this parameter is no, but if it is not present in the configuration, it defaults to yes. (Restart of HTTP service required). Syntax: boolean. Default: no |
|
This enables the SASL ANONYMOUS mechanism for use by IMAP. Syntax: boolean. Default: no |
|
IMAP protocol welcome banner. One line string, with virtual parameters: %h=hostname, %p=protocol(ESMTP,POP or IMAP), %P=Product Name ('Sun Java(tm) System Messaging Server'), %v and %V=Version (short or long). Syntax: string. Default: %h %p service (%P %V) |
|
Maximum number of connections per IP address. The syntax is: 'realm1,realm2,...' where a realm has the form of address ranges and maximum number of connections expressed as: 'IP|MASK:NUM'. There should be at least 1 realm of the form: '0.0.0.0|0.0.0.0:n' to cover the default case. Syntax: string. Default: NULL |
|
List of domains and/or IP addresses allowed IMAP access. Syntax: string. Default: NULL |
|
List of domains and/or IP addresses not allowed IMAP access. Syntax: string. Default: NULL |
|
Enable imap server on start-msg startup (note: IMAP over SSL service is enabled/disabled separately using service.imap.enablesslport). (Restart of IMAP service required). Syntax: boolean. Default: msmaEnable |
|
Sets whether or not IMAP over SSL service is started. (Restart of IMAP service required). Syntax: boolean. Default: no |
|
Maximum idle time for connections (in minutes). (Restart of IMAP service required). Syntax: unsigned integer. Default: 30 |
|
Maximum number of sessions per server process. (Restart of IMAP service required). Syntax: unsigned integer. Default: 4000 |
|
Maximum number of threads per server process. (Restart of IMAP service required). Syntax: unsigned integer. Default: 250 |
|
Number of IMAP server processes. (Restart of IMAP service required). Syntax: unsigned integer. Default: 1 |
|
If this is > 0, then disable use of plaintext passwords unless a security layer (SSL or TLS) is activated. This forces users to enable SSL or TLS on their client to login which prevents exposure of their passwords on the network. Syntax: integer. Default: 0 |
|
IMAP server port number. (Restart of IMAP service required). Syntax: unsigned integer. Default: 143 |
|
Number of SSL sessions to be cached. (Restart of IMAP service required). Syntax: unsigned integer. Default: 0 |
|
IMAP over SSL port number. (Restart of IMAP service required). Syntax: unsigned integer. Default: 993 |
|
Sets whether or not to enable SSL. The initial value for this parameter is no, but if it is not present in the configuration, it defaults to yes. (Restart of IMAP service required). Syntax: boolean. Default: no |
|
Default LDAP pool size. Syntax: integer. Default: 0 |
|
Experimental LDAP SDK memcache size in bytes. Syntax: unsigned integer. Default: 131072 |
|
Experimental LDAP SDK memcache entry time to live in seconds. Syntax: unsigned integer. Default: 30 |
|
The IP address to listen on. (Restart of all services required). Syntax: string. Default: INADDR_ANY |
|
Character(s) to be used as login separator (between userid and domain). (Restart of all services required). Syntax: string. Default: @ |
|
Sets whether or not anonymous login is allowed. Syntax: boolean. Default: no |
|
POP protocol welcome banner. One line string, with virtual parameters: %h=hostname, %p=protocol(ESMTP,POP or IMAP), %P=Product Name ('Sun Java(tm) System Messaging Server'), %v and %V=Version (short or long). Syntax: string. Default: %h %p service (%P %V) |
|
Maximum number of connections per IP address. The syntax is: 'realm1,realm2,...' where a realm has the form of address ranges and maximum number of connections expressed as: 'IP|MASK:NUM'. There should be at least 1 realm of the form: '0.0.0.0|0.0.0.0:n' to cover the default case. Syntax: string. Default: NULL |
|
List of domains and/or IP addresses allowed POP access. Syntax: string. Default: NULL |
|
List of domains and/or IP addresses not allowed POP access. Syntax: string. Default: NULL |
|
Enable pop server on start-msg startup (note: POP over SSL service is enabled/disabled separately using service.pop.enablesslport). (Restart of POP service required). Syntax: boolean. Default: msmaEnable |
|
Sets whether or not POP over SSL service is started. (Restart of POP service required). Syntax: boolean. Default: no |
|
Maximum idle time for connections (in minutes). Syntax: unsigned integer. Default: 10 |
|
Maximum number of sessions per server process. (Restart of POP service required). Syntax: unsigned integer. Default: 600 |
|
Maximum number of threads per server process. (Restart of POP service required). Syntax: unsigned integer. Default: 250 |
|
Number of POP server processes. (Restart of POP service required). Syntax: unsigned integer. Default: 1 |
|
If this is > 0, then disable use of plaintext passwords unless a security layer (SSL or TLS) is activated. This forces users to enable SSL or TLS on their client to login which prevents exposure of their passwords on the network. Syntax: integer. Default: 0 |
|
POP server port number. (Restart of POP service required). Syntax: unsigned integer. Default: 110 |
|
Number of SSL sessions to be cached. (Restart of POP service required). Syntax: unsigned integer. Default: 0 |
|
POP over SSL port. (Restart of POP service required). Syntax: unsigned integer. Default: 995 |
|
Sets whether or not to enable SSL. The initial value for this parameter is no, but if it is not present in the configuration, it defaults to yes. (Restart of POP service required). Syntax: boolean. Default: no |
|
Period that msprobe waits after sending an request that goes unfulfilled before restarting a service. See local.schedule.msprobe. Syntax: unsigned integer. Default: 30 |
|
Session store module name. Syntax: string. Default: session_store_simple |
|
Space separated list of user ids with message store administrator privileges. Syntax: string. Default: admin |
|
Enable compliance archive. Syntax: boolean. Default: off |
|
Enable operational archive. Syntax: boolean. Default: off |
|
Archive injection directory. (Restart of all services required). Syntax: string. Default: NULL |
|
Archive confirm report directory. (Restart of all services required). Syntax: string. Default: NULL |
|
Archive retrieve server port. Syntax: unsigned integer. Default: 80 |
|
Archive retrieve server. (Restart of all services required). Syntax: string. Default: NULL |
|
Archive retrieve timeout in seconds. Syntax: unsigned integer. Default: 30 |
|
Temporary directory for archived message retrieval. If not set, local.tmpdir is used. (Restart of all services required). Syntax: string. Default: NULL |
|
stored checkpoint debug. Syntax: boolean. Default: 0 |
|
Age (in hours) of expired or expunged message before purge will permanently remove it. Syntax: unsigned integer. Default: 1 |
|
Mailbox list database cache size. Setting the optimal cache size can make a big difference in overall Message Store performance. Cache efficiency can be determined by running msg-svr-base/lib/db_stat -m -h store.dbtmpdir/mboxlist, where store.dbtmpdir is the value of the store.dbtmpdir parameter. (Restart of IMAP service required; Restart of POP service required). Syntax: unsigned integer. Default: 16777216 |
|
Mailbox list database temporary directory. This is a directory which is very heavily accessed. At install time, the value of this parameter is not defined and defaults to a subdirectory underneath the msg-svr-base location. If the disks that house the mboxlist database temporary directory are not fast enough at very large sites, performance problems might occur. As part of their performance and tuning steps, sites should take a note of this and define a value for this parameter which either points to a memory mapped file system, or which points to a location on a fast file system. (Restart of IMAP service required; Restart of POP service required). Syntax: file path name. Default: NULL |
|
Default mailbox quota (in bytes). (Restart of all services required). Syntax: string. Default: -1 |
|
Default message quota (in number of messages). (Restart of all services required). Syntax: string. Default: -1 |
|
Default partition. Only applicable on INBOX. Subfolders will be created in the partition of the parent folder. (Restart of all services required). Syntax: string. Default: primary |
|
Enable sieve script in expire rules. Syntax: boolean. Default: off |
|
Syntax: 'and'|'or'. Deleted is a message status flag. This attribute set to 'and' specifies that the message must be seen and other criteria must be met before the rule is fulfilled. Set to 'or', this attribute specifies that the message only need to be seen or another criteria be met before the rule is fulfilled. Syntax: string. Default: NULL |
|
When this parameter is set to 'yes', it is the only rule applied even if other rules match the given criteria. Syntax: boolean. Default: no |
|
Folders for which the rule apply. Syntax: POSIX regular expression. Syntax: string. Default: NULL |
|
Maximum number of bytes in folder. Syntax: unsigned integer. Default: 0 |
|
Upper limit on number of messages to be kept in the specified folders. Syntax: unsigned integer. Default: 0 |
|
Upper limit on how long a message is kept in the specified folders (in days). Syntax: unsigned integer. Default: 0 |
|
Size of an over-sized message. Syntax: unsigned integer. Default: 0 |
|
Days an over-sized message should remain in a folder. Syntax: unsigned integer. Default: 0 |
|
Syntax: 'and'|'or'. Seen is a message status flag. This attribute set to 'and' specifies that the message must be seen and other criteria must be met before the rule is fulfilled. Set to 'or', this attribute specifies that the message only need to be seen or another criteria be met before the rule is fulfilled. Syntax: string. Default: NULL |
|
Enable quota by folder. Syntax: boolean. Default: no |
|
Defines a message type. (Restart of all services required). Syntax: string. Default: NULL |
|
Flag name of a message type. (Restart of all services required). Syntax: string. Default: NULL |
|
Quota root of a message type. (Restart of all services required). Syntax: string. Default: NULL |
|
Enable the message type feature. (Restart of all services required). Syntax: boolean. Default: no |
|
Defines an alternative message type header field. (Restart of all services required). Syntax: string. Default: NULL |
|
Message hash database cache size. Syntax: unsigned integer. Default: 8388608 |
|
Enable message hash database. Syntax: boolean. Default: off |
|
Message hash database size. Syntax: unsigned integer. Default: 0 |
|
Controls the message file directory path. (Restart of all services required). Syntax: file path name. Default: NULL |
|
Controls the store index file directory path. (Restart of all services required). Syntax: file path name. Default: NULL |
|
Full path name of the primary partition. (Restart of all services required). Syntax: file path name. Default: msg-svr-base/data/store/partition/primary |
|
Disallow regular users sharing private folders to anyone. Syntax: boolean. Default: 0 |
|
Disallow regular users sharing private folders to users in another domain. Syntax: boolean. Default: 0 |
|
Private shared folders share flags across users. Syntax: boolean. Default: 0 |
|
Public shared folder owner's userid. (Restart of all services required). Syntax: string. Default: NULL |
|
Enable quota enforcement. When off, the quota database is still updated, but messages are always delivered. Syntax: boolean. Default: on |
|
Message to be sent to user when quota exceeds store.quotawarn. The message must contain a header (with at least a subject line), followed by $$, then the message body. The $ represents a new line. There is support for the following variables: [ID] - userid, [DISKUSAGE] - disk usage, [NUMMSG] - number of messages, [PERCENT] - store.quotawarn percentage, [QUOTA] - mailquota attribute, [MSGQUOTA] - mailmsgquota attribute. Syntax: string. |
|
Localized message to be sent to user when quota exceeds store.quotawarn. The message must contain a header (with at least a subject line), followed by $$, then the message body. The $ represents a new line. There is support for the following variables: [ID] - userid, [DISKUSAGE] - disk usage, [NUMMSG] - number of messages, [PERCENT] - store.quotawarn percentage, [QUOTA] - mailquota attribute, [MSGQUOTA] - mailmsgquota attribute. Syntax: string. |
|
Interval (in days) to wait before sending another quota exceeded message. Syntax: integer. Default: 7 |
|
Time (in hours) a mailbox must be over quota before messages to the mailbox will bounce back to the sender. Syntax: unsigned integer. Default: 120 |
|
Enables quota notification for the message store. Syntax: boolean. Default: off |
|
Percentage of quota that must be exceeded before clients are sent an over quota warning. Syntax: integer. Default: 90 |
|
DN of service administrator group. Syntax: string. Default: cn=Service Administrators,ou=Groups, ugldapbasedn |
|
Enable quota by type. Syntax: boolean. Default: no |
|
Umask. (Restart of IMAP service required; Restart of POP service required). Syntax: string. Default: 077 |