man Pages(7):Device and Network Interfaces

fd(7D)

NAME

fd, fdc- drivers for floppy disks and floppy disk controllers

SYNOPSIS

SPARC

/dev/diskette0

/dev/rdiskette0

x86

/dev/diskette[0-1]

/dev/rdiskette[0-1]

DESCRIPTION

The fd driver provides the interfaces to the floppy disks using the Intel 82072 on sun4c systems and the Intel 82077 on sun4m systems.

The fd and fdc drivers provide the interfaces to floppy disks using the Intel 8272, Intel 82077, NEC 765, or compatible disk controllers on x86 based systems.

The default partitions for the floppy driver are:

`a`	All cylinders except the last
`b`	Only the last cylinder
`c`	Entire diskette

The fd driver autosenses the density of the diskette.

When the floppy is first opened the driver looks for a SunOS label in logical block 0 of the diskette. If attempts to read the SunOS label fail, the open will fail. If block 0 is read successfully but a SunOS label is not found, auto-sensed geometry and default partitioning are assumed.

The fd driver supports both block and raw interfaces. The block files access the diskette using the system's normal buffering mechanism and may be read and written without regard to physical diskette records. There is also a "raw" interface that provides for direct transmission between the diskette and the user's read or write buffer. A single read(2) or write(2) call usually results in one I/O operation; therefore raw I/O is considerably more efficient when many words are transmitted.

3.5" Diskettes

For 3.5" double-sided diskettes, the following densities are supported:

SPARC

1.7 Mbyte density: 80 cylinders, 21 sectors per track, 1.7 Mbyte capacity
high density: 80 cylinders, 18 sectors per track, 1.44 Mbyte capacity
double density: 80 cylinders, 9 sectors per track, 720 Kbyte capacity
medium density: 77 cylinders, 8 sectors per track, 1.2 Mbyte capacity (sun4m only)

x86

extended density: 80 cylinders, 36 sectors per track, 2.88 Mbyte capacity
1.7 Mbyte density: 80 cylinders, 21 sectors per track, 1.7 Mbyte capacity
high density: 80 cylinders, 18 sectors per track, 1.44 Mbyte capacity
double density: 80 cylinders, 9 sectors per track, 760 Kbyte capacity

5.25" Diskettes

For 5.25" double-sided diskettes, the following densities are supported:

SPARC

5.25" diskettes are not supported.

x86

high density: 80 cylinders, 15 sectors per track, 1.2 Mbyte capacity
double density: 40 cylinders, 9 sectors per track, 360 Kbyte capacity
double density: 40 cylinders, 8 sectors per track, 320 Kbyte capacity
quad density: 80 cylinders, 9 sectors per track, 720 Kbyte capacity
double density: 40 cylinders, 16 sectors per track (256 bytes per sector), 320 Kbyte capacity
double density: 40 cylinders, 4 sectors per track (1024 bytes per sector), 320 Kbyte capacity

ERRORS

EBUSY: During opening, the partition has been opened for exclusive access and another process wants to open the partition. Once open, this error is returned if the floppy disk driver attempted to pass a command to the floppy disk controller when the controller was busy handling another command. In this case, the application should try the operation again.
EFAULT: An invalid address was specified in an ioctl command (see fdio(7I) ).
EINVAL: The number of bytes read or written is not a multiple of the diskette's sector size. This error is also returned when an unsupported command is specified using the FDIOCMD ioctl command (see fdio(7I) ).
EIO: During opening, the diskette does not have a label or there is no diskette in the drive. Once open, this error is returned if the requested I/O transfer could not be completed.
ENOSPC: An attempt was made to write past the end of the diskette.
ENOTTY: The floppy disk driver does not support the requested ioctl functions (see fdio(7I) ).
ENXIO: The floppy disk device does not exist or the device is not ready.
EROFS: The floppy disk device is opened for write access and the diskette in the drive is write protected.

x86 Only

ENOSYS: The floppy disk device does not support the requested ioctl function ( FDEJECT ).

x86 CONFIGURATION

The driver attempts to initialize itself using the information found in the configuration file, /platform/i86pc/kernel/drv/fd.conf .

name="fd"  parent="fdc"  unit=0;
name="fd"  parent="fdc"  unit=1;

FILES

SPARC

/platform/sun4c/kernel/drv/fd: driver module
/platform/sun4m/kernel/drv/fd: driver module
/platform/sun4u/kernel/drv/fd: driver module
/usr/include/sys/fdreg.h: structs and definitions for Intel 82072 and 82077 controllers
/usr/include/sys/fdvar.h: structs and definitions for floppy drivers
/dev/diskette: device file
/dev/diskette0: device file
/dev/rdiskette: raw device file
/dev/rdiskette0: raw device file

For ucb compatibility:

/dev/fd0[a-c]: block file
/dev/rfd0[a-c]: raw file
/vol/dev/diskette0: directory containing volume management character device file
/vol/dev/rdiskette0: directory containing the volume management raw character device file
/vol/dev/aliases/floppy0: symbolic link to the entry in /vol/dev/rdiskette0

x86

/platform/i86pc/kernel/drv/fd: driver module
/platform/i86pc/kernel/drv/fd.conf: configuration file for floppy driver
/platform/i86pc/kernel/drv/fdc: floppy-controller driver module
/platform/i86pc/kernel/drv/fdc.conf: configuration file for the floppy-controller
/usr/include/sys/fdc.h: structs and definitions for x86 floppy devices
/usr/include/sys/fdmedia.h: structs and definitions for x86 floppy media
x86 First Drive :

/dev/diskette: device file
/dev/diskette0: device file
/dev/rdiskette: raw device file
/dev/rdiskette0: raw device file

For ucb compatibility:

/dev/fd0[a-c]: block file
/dev/rfd0[a-c]: raw file
/vol/dev/diskette0: directory containing volume management character device file
/vol/dev/rdiskette0: directory containing the volume management raw character device file
/vol/dev/aliases/floppy0: symbolic link to the entry in /vol/dev/rdiskette0
x86 Second Drive :

/dev/diskette1: device file
/dev/rdiskette1: raw device file

For ucb compatibility:

/dev/fd1[a-c]: block file
/dev/rfd1[a-c]: raw file
/vol/dev/diskette1: directory containing volume management character device file
/vol/dev/rdiskette1: directory containing the volume management raw character device file
/vol/dev/aliases/floppy1: symbolic link to the entry in /vol/dev/rdiskette1

DIAGNOSTICS

fd<n>: <command name> failed (<sr1> <sr2> <sr3>)

The <command name> failed after several retries on drive <n>. The three hex values in parenthesis are the contents of status register 0, status register 1, and status register 2 of the Intel 8272, the Intel 82072, and the Intel 82077 Floppy Disk Controller on completion of the command as documented in the data sheet for that part. This error message is usually followed by one of the following, interpreting the bits of the status register:

fd< n >:: not writable
fd< n >:: crc error blk <block number> There was a data error on <block number>.
fd< n >:: bad format
fd< n >:: timeout
fd< n >:: drive not ready
fd< n >:: unformatted diskette or no diskette in drive
fd< n >:: block <block number> is past the end! (nblk=<total number of blocks>) The operation tried to access a block number that is greater than the total number of blocks.
fd< n >:: b_bcount 0x<op_size> not % 0x<sect_size> The size of an operation is not a multiple of the sector size.
fd< n >:: overrun/underrun
fd< n >:: host bus error There was a hardware error on a system bus.

SPARC Only

Overrun/underrun errors occur when accessing a diskette while the system is heavily loaded. Decrease the load on the system and retry the diskette access.

NOTES

3.5" high density diskettes have 18 sectors per track and 5.25" high density diskettes have 15 sectors per track. They can cross a track (though not a cylinder) boundary without losing data, so when using dd(1M) to or from a diskette, you should specify bs=18k or multiples thereof for 3.5" diskettes, and bs=15k or multiples thereof for 5.25" diskettes.

The SPARC fd driver is not an unloadable module.

Under Solaris (Intel Platform Edition), the configuration of the floppy drives is specified in CMOS configuration memory. Use the BIOS setup program or an EISA configuration program for the system to define the diskette size and density/capacity for each installed drive. Note that MS-DOS may operate the floppy drives correctly, even though the CMOS configuration may be in error. Solaris (Intel Platform Edition) relies on the CMOS configuration to be accurate.

SunOS 5.7 Last Revised 24 Feb 1998

fd(7D)

NAME

SYNOPSIS

SPARC

x86

DESCRIPTION

3.5" Diskettes

SPARC

x86

5.25" Diskettes

SPARC

x86

ERRORS

x86 Only

x86 CONFIGURATION

FILES

SPARC

x86

SEE ALSO

DIAGNOSTICS

SPARC Only

NOTES