The last close to a STREAMS device dismantles the Stream. Dismantling consists of popping any modules on the Stream and closing the driver. Before a module is popped, the close(2) may delay to allow any messages on the write message queue of the module to be drained by module processing. Similarly, before the driver is closed, the close(2) may delay to allow any messages on the write message queue of the driver to be drained by driver processing. If O_NDELAY (or O_NONBLOCK, see open(2) and fcntl(2)) is clear, close(2) waits up to 15 seconds for each module to drain and up to 15 seconds for the driver to drain. The default close delay is 15 seconds, but this can be changed on a per-Stream basis with the I_SETCLTIME ioctl(2).
The delay is independent of any delay that the module or driver's close routine itself chooses to impose. If O_NDELAY (or O_NONBLOCK) is set, the pop is performed immediately and the driver is closed without delay.
Messages can remain queued, for example, if flow control is inhibiting execution of the write queue service procedure. When all modules are popped and any wait for the driver to drain is completed, the driver close routine is called. On return from the driver close, any messages left on the driver's queues are freed, and the queue and Stream head structures are released.