Error Message |
Probable Cause(s) |
Recommended Action |
|
---|---|---|---|
8000
|
Unable to open driver driver name: sys error msg |
Device name is wrong or driver is not loaded. |
Check the device name (if entered) or load driver. |
Device busy. |
Kill all other processes accessing driver. |
||
8001 |
kstat_open failed |
No kernel resource available. |
Consult /var/adm/messages file for more information. |
System software error |
|||
8002 |
kstat_lookup failed for env2test structure in kstat module |
env2test module not found. |
Check revision and reload envctrl driver. |
No kernel resource available |
Consult /var/adm/messages file for more information. |
||
System software error. |
|||
8003 |
kstat_read failed env2test structure in kstat module |
env2test module not found. |
Check revision /reload envctrl driver. |
No kernel resource available. |
Consult the /var/adm/messages file for more information. |
||
System software error. |
|||
8004 |
Unable to close kstat |
No kernel resource available. |
Consult the /var/adm/messages file for more information. |
System software error. |
|||
8005 |
Unable to set mode to DIAG using ioctl.: sys error msg |
System software error |
Consult the /var/adm/messages file for more information. |
8006 |
Unable to set disk LEDs: sys error msg |
System software error |
Consult the /var/adm/messages file for more information. |
8007 |
Unable to get disk LEDs: sys error msg |
System software error. |
Consult the /var/adm/messages file for more information. |
8008 |
Unable to set fan speed to speed: sys error msg |
Fan hardware failure |
Manually check the fan speed and replace the fan. |
System software error. |
Consult the /var/adm/messages file for more information. |
||
8009 |
Unable to get fan speed: sys error msg |
System software error |
Consult the /var/adm/messages file for more information. |
8010 |
Fan speed speed out of range: MIN speed MAX speed |
Fan hardware failure. |
Manually check the fan speed and replace the fan. |
System software error. |
Consult the /var/adm/messages file for more information. |
||
8011 |
Forced fan fault did not occur for fan type fanbank |
Hardware failure. |
Replace the hardware. |
|
System software error. |
Consult the /var/adm/messages file for more information. |
|
8015 |
Power Supply supply has failed: State state |
Power supply hardware failure. |
Replace the power supply. |
8016 |
Unable to allocate memory using malloc. : sys error msg |
System software error. |
Consult the /var/adm/messages file for more information. |
8017 |
Unable to set mode to NORMAL using ioctl. : sys error msg |
System software error. |
Consult the /var/adm/messages file for more information. |
8018 |
Error encountered during call to function name |
|
|
8019 |
Unable to set front panel LEDs using ioctl.: sys error msg |
System software error. |
Consult the /var/adm/messages file for more information. |
8020 |
Unable to reset front panel LEDs to original state |
System software error. |
Consult the /var/adm/messages file for more information. |
8021 |
Unable to get front panel LEDs. |
System software error. |
Consult the /var/adm/messages file for more information. |
8022 |
Ambient temperature temperature Celsius out of range |
envctrl hardware error. |
|
8023 |
CPU CPU # temperature temperature Celsius out of range |
envctrl hardware error. |
|
8024 |
Data Miscompare: ioctl diskled mask = diskled mask kstat diskled mask = diskled mask |
hardware error |
|
System software error. |
Consult the /var/adm/messages file for more information. |
||
8025 |
Illegal options passed to env2test option |
User error. |
Check usage by typing env2test -u. |
8026 |
Unable to retrieve power supply information. |
I2C hardware failure. |
Replace power supply. |
I2C bus wedged. |
Check for other I2C devices that may be corrupting the I2C bus. |
||
8033 |
Temperature temperature celsius out of range. |
Hardware error. |
Check all thermistors. |