Error Message |
Probable Cause(s) |
Recommended Action |
|
---|---|---|---|
8000
|
Unable to open driver driver name: sys error msg |
Device name is wrong or driver is not loaded. |
Check the device name (if entered) or load driver. |
Device busy. |
Kill all other processes accessing driver. |
||
8001 |
Unable to allocate memory using malloc: sys err msg |
System software error. |
Consult /var/adm/messages file for more information. |
8002 |
Illegal options passed to rsctest option |
User error. |
Check usage by typing rsctest -u. |
8003 |
Error encountered during call to function name |
|
|
8004 |
Error encountered during call to rsc_send(). Error Code: sys error msg |
RSC Hardware is not responding. |
Reset RSC. |
8005 |
Error encountered during call to rsc_recv(). Error Code: sys error msg |
RSC RTOS test timed out. |
Reset RSC. |
8006 |
Failing status received. Status:status |
RSC's RTOS test returned a failing status. |
|
8007 |
Invalid message type received from rsc_recv(). Msg_type: msg type |
RSC returned a unexpected message type. |
RSC RTOS/protocol error. |
8008 |
Error encountered during call to rsc_start(). Error Code: sys error msg |
Unable to initialize RSC test protocol. |
RSC RTOS/protocol error. Reset RSC. |
8009 |
RSC's Internal|External enettest failed for pattern type= patt type |
Internal: Bad hardware Improper RSC enet configuration. |
Check RSC configuration. Check 10 MB hub and cable. Replace mother board. |
External: Bad hardware, Improper RSC enet configuration, Missing 10 MB hub and cable. |
|||
8010 |
RSC's PING test failed. Pattern type = patt type Target host= target IP. |
Invalid RSC enet configuration. |
Check RSC's enet configuration. |
Missing/damaged cable Invalid target IP Hardware failure. |
Check cable connection. Check target IP address option. Replace mother board. |
||
8011 |
RSC's flash checksum test failed. Status: status |
Corrupted flash firmware. Error on I2C bus. Bad flash hardware. |
Reflash firmware. Check I2C bus using env2test. Replace Hardware. |
8013 |
term setting failed for TERMIO.:sys error msg |
RSC protocol error. |
|
System software error. |
Consult the /var/adm/messages file for more information. |
||
8014 |
Read failed.: sys error msg |
System software error. |
Consult the /var/adm/messages file for more information. |
8015 |
Data read does not match data sent. |
Bad hardware or System software error. |
|
8016 |
Data read exceeds data sent. |
Bad hardware or System software error. |
|
8017 |
Select timedout for read.:sys error msg |
System software error. Excessive load on RSC/system causing lost data. |
Reduce RSC and System load. Consult the /var/adm/messages file for more information. |
8018 |
Write failed for num bytes bytes of data.:sys error msg |
System software error. |
Consult the /var/adm/messages file for more information. |
8019 |
Select timedout for write.: sys error msg |
System software error. |
Consult the /var/adm/messages file for more information. |
8020 |
RSC Serial test failed. Test Name= testname Loopback= Loopback type Pattern_Type= patt type Baud= baud rate. |
Bad hardware or System software error. |
|
8021 |
OPEN of port failed.:sys error msg. |
System software error. |
Consult the /var/adm/messages file for more information. |
8022 |
RSC Status shows that the last run of POST failed. |
Bad hardware or System Firmware error. |
|
8023 |
Unable to access lib rsc lib.: sys error msg. |
System software error.
|
Consult the /var/adm/messages file for more information. |
8024 |
Unable to close lib.: sys error msg. |
System software error.
|
Consult the /var/adm/messages file for more information. |
8025 |
Call to rsc_init() failed. Error Code: rsc error msg |
System software error.
|
Consult the /var/adm/messages file for more information. |
8026 |
Unable to access function function name in lib.: sys error msg. |
System software error.
|
Consult the /var/adm/messages file for more information. |
8027 |
RSC's SEEPROM checksum test failed. Status: status. |
Corrupted Firmware or problem with I2C bus or system software error. |
|
8028 |
Select failed for [Write/Read]. |
Hung RSC. RSC data protocol error. | Consult /var/adm/messages file for more information. |
8029 |
Sending OFF to Serial test failed. Test Name= test_name Loopback= loopback_type pattern_type=pattern_type Baud=baud_rate |
Hung RSC. RSC data protocol error. | Reset RSC. |
8031 | Communication to RSC failed. | RSC Hung | Reset RSC. |
8032 | Unable to get RSC's console port from library. |
RSC lib not installed. System software error. | Check for RSC lib on host. |
8033 | Unable to get RSC's control port from library. |
RSC lib not installed. System software error. | Check for RSC lib on host. |
8034 | Unable to negotiate loopback mode on RSC for serial loopback. |
Excessive RSC load. RSC data protocol error. |
Reduce RSC and system load. Reset RSC. |