rtvctest Command Line Syntax
/opt/SUNWvts/bin/rtvctest [fmt=none|ntsc|pal] [port=none|cv1|cv2|svhs] dev=rtvc_device
Table 28-4 rtvctest Command Line Syntax|
Arguments |
Description |
|---|---|
|
fmt |
Select the format of the video source used for testing. Select either ntsc (video standard in the United States and Japan) or pal (video standard in Europe). |
|
port |
If you have selected a video source for testing, then you must state which input port you have used to connect the source to the SunVideo card. You may select from the following ports: o cv1 Composite video input port 1 (RCA type) o cv2 Composite video input port 2 (RCA type) o svhs Super VHS port |
|
dev |
You are required to state the SunVideo device when running the rtvctest from the command line. Replace rtvc_device with rtvcn, where n is the device number (from 0 to 31) of the SunVideo card being tested. |
Note -
64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".
- © 2010, Oracle Corporation and/or its affiliates