|
Error Message |
Probable Cause(s) |
Recommended Action |
---|---|---|---|
4001 |
Unable to communicate from string |
SCI adapter failure or no cable connected. |
Check cable connections. Replace the SCI adaptor. |
4002 |
Can not access /etc/sma.ip file. "I WILL STOP TESTING SCI INTERFACES" |
/etc/sma.ip is missing, or the cluster is not configured, or this is an old cluster version. |
Use sm_config to configure the cluster. Restore the files from a backup tape. Specify the cluster machines in the target host of test options before running the test. |
6000 |
RPC broadcast failure error_message |
|
|
6001 |
Unable to resolve host_name ethernet address |
|
|
6002 |
No ICMP echo reply from string |
SCI adaptor failure or no cable connected. |
Check cable connections. Replace the SCI adaptor.
|
6003 |
ICMP echo reply incorrect length from host_name, exp data obs data |
|
|
6004 |
ICMP echo reply length number from host_name, data mismatch at byte number, exp value obs value |
|
|
6005 |
Unable to find any test target |
|
|
8000 |
Unable to open device_name error_message |
|
|
8001 |
Bad ioctl name error_message |
|
|
8002 |
Unable to allocate number bytes of memory error_message |
|
|
8003 |
System call name returned value error_message |
|
|
8004 |
Unable to map network entry for host_name |
|
|
8006 |
Failed to allocate number bytes of swap space for configuration |
|
|
8007 |
dl_primitive response = value |
|
|
8008 |
dl_ok_ack: short response |
|
|
8009 |
dl_phys_addr_ack: short response |
|
|
8010 |
Invalid Argument string |
|
|
8011 |
Interface device_name not configured in system |
|
|
8012 |
SCITEST can not open/read /etc/sma.ip |
|
|