Use the download subcommand to download a prom image to the FEPROMs on a StorEdge A5000 disk array IB or on a SPARCstorage Array controller board.
In a StorEdge A5000 disk array, when the download is complete, the disk array is be reset and the downloaded code is executed.
In a SPARCstorage Array, when the download is complete, you must reset the SPARCstorage Array to execute the downloaded code.
StorEdge A5000
SPARCstorage Array
luxadm [ -v ] download [-s] [-f filename-path ]
When using the -s option, the download modifies the FEPROM in the StorEdge A5000 disk array.
The -s option does not apply to the SPARCstorage Array controller, as it always writes the downloaded firmware into the FEPROM.
Option/Argument |
Description |
---|---|
-s |
Saves the downloaded firmware in the FEPROM in a StorEdge A5000 disk array . If -s is not specified, the downloaded firmware will not be saved across power cycles. |
-f filename |
Downloads the prom image in filename. If you do not specify a filename, the default prom image is used. The default prom image in a StorEdge A5000 is in the directory /usr/lib/locale/C/LC_MESSAGES and is named ibfirmware. The default prom image in a SPARCstorage Array is in the directory /usr/lib/firmware/ssa and is named ssafirmware. |
-w WWN |
This option is for the SPARCstorage Array only. See "Changing a SPARCstorage Array WWN (download)". |