Reconnect the Node to Shared Storage

Steps

1. (Optional) If necessary, detach the submirrors on the storage array.

   For more information, see your Solstice DiskSuite/Solaris Volume Manager or VERITAS Volume Manager documentation.

2. Disconnect the SCSI terminator. Reattach the SCSI cable between the storage array and Node A.

   ---

   Caution –

   Connect this storage array to the same host adapter that the storage array was connected before you disconnected the SCSI cable.

   ---

3. Boot Node A into cluster mode.

4. If you detached submirrors in Step 1, reattach the submirrors on the storage array. Wait for the submirrors to resynchronize.

   For more information, see your Solstice DiskSuite/Solaris Volume Manager or VERITAS Volume Manager documentation.

5. Repeat Step 1 through Step 4 for the remaining storage array that you want to reconnect to Node A.

6. (Optional) Return the resource groups and device groups that you identified in Step 1 to Node A.

   # scswitch -z -g resource-group -h nodename # scswitch -z -D device-group-name -h nodename