Documentation, Support, and Training
Check Network Management Port Status LEDs
Check Power Supply Status LEDs
Understanding Routing Through the Switch
CXP Connectors and Link LEDs to Switch Chip Port Routes
Switch Chip Port to Switch Chip Port Routes
Switch Chip Port to CXP Connectors and Link LED Routes
Signal Route Through the Switch
Administrative Command Overview
Display Switch Environmental and Operational Data
Locate a Switch Chip or Connector From the GUID
Display Switch Chip Boot Status
Display Switch Chip Port Status
Monitoring the InfiniBand Fabric
Identify All Switches in the Fabric
Identify All HCAs in the Fabric
Display the InfiniBand Fabric Topology
Display a Route Through the Fabric
Display the Link Status of a Node
Display Data Counters for a Node
Display Low-Level Detailed Information About a Node
Display Low-Level Detailed Information About a Port
Restart the Management Controller
Recover Ports After Switch Chip Reset
Change the Administrator Password
Controlling the InfiniBand Fabric
Perform Comprehensive Diagnostics for the Entire Fabric
Perform Comprehensive Diagnostics for a Route
Determine Changes to the InfiniBand Fabric Topology
Find 1x or SDR or DDR Links in the Fabric
Determine Which Links Are Experiencing Significant Errors
Controlling the Subnet Manager
Set the Subnet Manager Priority
Start the Subnet Manager With the opensmd Daemon
In time, newer or updated switch firmware might become available. The nm2version command displays the versions of the firmware within the switch chassis.
On the management controller, type:
# nm2version NM2-72p version: 0.1.0-1 Build time: Aug 24 2009 16:41:03 FPGA version: 0x94 ComExpress info: Board Name: "NOW1" Manufacturer Name: "JUMP" Manufacturing Date: 2009.02.19 Last Repair Date: 1980.01.01 Serial Number: "NCD2S0240" Hardware Revision: 0x0100 Firmware Revision: 0x0102 Jida Revision: 0x0103 Feature Number: 0x0001 #
Note - The output of the nm2version command contains extraneous information. In this example, only the output that is bold is relevant to the administration of the switch.
Switch Reference, nm2version command