| Skip Navigation Links | |
| Exit Print View | |
|
Sun Rack II Power Distribution Units User’s Guide |
1. Preparing for the Installation
Reviewing the Facility Requirements
Circuit Breaker Capacity and Characteristics
2. Installing Power Distribution Units Into Sun Rack II Cabinets
Install a Standard PDU Into the Rack
Compact PDU Installation Locations
Mounting Bracket Screw and Spring Nut Locations
Install a Compact PDU Into the Rack
Connecting the PDU to the AC Power Source
Connect the PDU to the AC Power Source
Connecting Power Jumper Cords to Installed Equipment
3. Servicing Power Distribution Units
Removing and Replacing a Standard PDU
Removing and Replacing a Compact PDU
4. Connecting a Standard Power Distribution Unit to the Network
Connecting a Standard PDU to the Network for the First Time
Connect a Standard PDU to a DHCP Network
Connect a Standard PDU to a Network Using a Static IP Address
Configure a Solaris System for a Point-to-Point Connection
Configure a Windows PC for a Point-to-Point Connection
Connect a Standard PDU to a Network Using a Static IP Address
5. Monitoring a Standard Power Distribution Unit
Monitoring a Standard PDU Task Overview
Relationship Between Modules and Outlet Groups
Single-Phase PDU Module and Outlet Group Relationship
Three-Phase PDU Module and Outlet Group Relationship
Accessing a Metering Unit on the Network
Access a Metering Unit on the Network
Setting Threshold Parameter Levels
Set Threshold Parameter Levels
Monitor the PDU Using Metering Unit's LCD Screen
Monitor the PDU Using the HTML Interface
Add Users and Change Passwords
Send System Log Messages to Systems on the Network
Types of PDU Metering Unit SNMP Traps
Verifying and Updating the Firmware
Update the PDU Metering Unit Firmware
View Status Information on the LCD Screen
RJ-45 Ethernet Port LED and Pin Descriptions
Restoring the PDU to Factory Default Settings
|
