Flash Module Architecture Overview
Energy Storage Module Overview
Perform ESD Prevention Measures
(Optional) Install Full-Height Bracket
Install the Card Into a System
FMod Alignment for Optimal Performance
(Optional) Using the SAS/SATA Controller as a Boot Device
SAS/SATA Controller as a Boot Device
Configure the SAS/SATA Controller as a Boot Device (SPARC Systems)
Configure the SAS/SATA Controller as a Boot Device (x86 Systems)
Replacing FMod Retention Clips
Update the FMod Firmware (Oracle Solaris OS)
Update the FMod Firmware (Windows and Linux OS)
Updating the SAS/SATA Controller Firmware
Update the SAS/SATA Controller Firmware (Oracle Solaris OS)
Update the SAS/SATA Controller Firmware (Linux OS)
See the Sun Flash Accelerator PCIe Card Product Notes and your system product notes for support information and any restrictions that might apply to your system. Install the card in a slot with maximum cooling.
Caution - Ensure the system and the Sun Flash Accelerator F20 PCIe card are properly cooled. Do not mix the Sun Flash Accelerator F20 PCIe card and other PCIe devices before verifying that such configurations are supported by your system. |