| Skip Navigation Links | |
| Exit Print View | |
|
Sun Flash Accelerator F20 PCIe Card User’s Guide |
Flash Module Architecture Overview
Energy Storage Module Overview
Perform ESD Prevention Measures
(Optional) Install Full-Height Bracket
Install the Card Into a System
FMod Alignment for Optimal Performance
(Optional) Using the SAS/SATA Controller as a Boot Device
SAS/SATA Controller as a Boot Device
Configure the SAS/SATA Controller as a Boot Device (SPARC Systems)
Configure the SAS/SATA Controller as a Boot Device (x86 Systems)
Replacing FMod Retention Clips
Update the FMod Firmware (Oracle Solaris OS)
Update the FMod Firmware (Windows and Linux OS)
Updating the SAS/SATA Controller Firmware
Update the SAS/SATA Controller Firmware (Oracle Solaris OS)
Update the SAS/SATA Controller Firmware (Linux OS)
This user’s guide provides detailed procedures that describe installing and configuring Oracle’s Sun Flash Accelerator F20 PCIe card. This guide also includes information about the installation and maintenance of the card. This document is written for technicians, system administrators, authorized service providers (ASPs), and users who have advanced experience troubleshooting and replacing hardware.
Note - For specific installation instructions, see your system installation guide. For information about restrictions and use of the Sun Flash Accelerator F20 PCIe card on your server, see the most recent version of the server product notes.
This preface contains the following topics:
The documents listed as online are available at:
http://www.oracle.com/technetwork/documentation
|
These web sites provide additional resources:
|