mkdevalloc(1M)

NAME | SYNOPSIS | DESCRIPTION | ATTRIBUTES | SEE ALSO

NAME

mkdevalloc- Make device_allocate entries

SYNOPSIS

/usr/sbin/mkdevalloc

DESCRIPTION

The mkdevalloc command writes to standard out a set of device_allocate(4) entries describing the system's frame buffer, audio and removable media devices.

The mkdevalloc command is used by the init.d(4) scripts to create or update the /etc/security/device_allocate file.

Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevalloc command checks for the following files under /dev:

audio           /dev/audio, /dev/audioctl, /dev/sound/...
tape            /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy          /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk  /dev/sr*, /dev/nsr*, /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer    /dev/fb

All entries set the device-minimum and device-maximum fields to the hex representations of ADMIN_LOW and ADMIN_HIGH, respectively. The device-authorization field is set to solaris.device.allocate, except for the framebuffer entry, where it is set to *. The device-name, device-type and device-clean fields are set to the following values:

                device-name      device-type   device-clean

audio           audio            audio         audio_clean_wrapper
tape            mag_tape_0,1,... st            st_clean
floppy          floppy_0,1,...   fd            disk_clean
removable disk  cdrom_0,1,...    sr            disk_clean
frame buffer    framebuffer      fb            /bin/true

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SUNWcsu

SEE ALSO

allocate(1), bsmconv(1M), attributes(5)

NAME | SYNOPSIS | DESCRIPTION | ATTRIBUTES | SEE ALSO