cfsadmin(1M)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OPERANDS | USAGE | EXAMPLES | EXIT STATUS | ATTRIBUTES | SEE ALSO
NAME
- cfsadmin– administer disk space used for caching file systems with the Cache File-System (CacheFS)
SYNOPSIS
-
cfsadmin -c [-o cacheFS-parameters] cache_directory
cfsadmin -d {cache_ID | all} cache_directory
cfsadmin -l cache_directory
cfsadmin -s {mntpt1 ....} | all
cfsadmin -u [-o cacheFS-parameters] cache_directory
DESCRIPTION
-
cache creation
-
deletion of cached file systems
-
listing of cache contents and statistics
-
resource parameter adjustment when the file system is unmounted.
The cfsadmin command provides the following functions:
You must always supply an option for cfsadmin. For each form of the command except -s, you must specify a cache directory, that is, the directory under which the cache is actually stored. A path name in the front file system identifies the cache directory. For the -s form of the command, you must specify a mount point.
You can specify a cache ID when you mount a file system with CacheFS, or you can let the system generate one for you. The -l option includes the cache ID in its listing of information. You must know the cache ID to delete a cached file system.
OPTIONS
- -c [ -o cacheFS-parameters ] cache_directory
-
Create a cache under the directory specified by cache_directory. This directory must not exist prior to cache creation.
- -d { cache_ID | all } cache_directory
-
Remove the file system whose cache ID you specify and release its resources, or remove all file systems in the cache by specifying all. After deleting a file system from the cache, you must run the fsck_cachefs(1M) command to correct the resource counts for the cache.
As indicated by the syntax above, you must supply either a cache_ID or all, in addition to cache_directory.
- -l cache_directory
-
List file systems stored in the specified cache, as well as statistics about them. Each cached file system is listed by cache ID. The statistics document resource utilization and cache resource parameters.
- -s { mntpt1 ... } | all
-
Request a consistency check on the specified file system (or all cachefs mounted file systems). The -s option will only work if the cache file system was mounted with demandconst enabled (see mount_cachefs(1M)). Each file in the specified cache file system is checked for consistency with its corresponding file in the back file system. Note that the consistency check is performed file by file as files are accessed. If no files are accessed, no checks are performed. Use of this option does not result in a sudden "storm" of consistency checks.
As indicated by the syntax above, you must supply one or more mount points, or all.
- -u [ -o cacheFS-parameters ] cache_directory
-
Update resource parameters of the specified cache directory. Parameter values can only be increased. To decrease the values, you must remove the cache and recreate it. All file systems in the cache directory must be unmounted when you use this option. Changes will take effect the next time you mount any file system in the specified cache directory. The -u option with no -o option sets all parameters to their default values.
- maxblocks=n
-
Maximum amount of storage space that CacheFS can use, expressed as a percentage of the total number of blocks in the front file system. If CacheFS does not have exclusive use of the front file system, there is no guarantee that all the space the maxblocks parameter allows will be available. The default is 90.
- minblocks=n
-
Minimum amount of storage space, expressed as a percentage of the total number of blocks in the front file system, that CacheFS is always allowed to use without limitation by its internal control mechanisms. If CacheFS does not have exclusive use of the front file system, there is no guarantee that all the space the minblocks parameter attempts to reserve will be available. The default is 0.
- threshblocks=n
-
A percentage of the total blocks in the front file system beyond which CacheFS cannot claim resources once its block usage has reached the level specified by minblocks. The default is 85.
- maxfiles=n
-
Maximum number of files that CacheFS can use, expressed as a percentage of the total number of inodes in the front file system. If CacheFS does not have exclusive use of the front file system, there is no guarantee that all the inodes the maxfiles parameter allows will be available. The default is 90.
- minfiles=n
-
Minimum number of files, expressed as a percentage of the total number of inodes in the front file system, that CacheFS is always allowed to use without limitation by its internal control mechanisms. If CacheFS does not have exclusive use of the front file system, there is no guarantee that all the inodes the minfiles parameter attempts to reserve will be available. The default is 0.
- threshfiles=n
-
A percentage of the total inodes in the front file system beyond which CacheFS cannot claim inodes once its usage has reached the level specified by minfiles. The default is 85.
- maxfilesize=n
-
Largest file size, expressed in megabytes, that CacheFS is allowed to cache. The default is 3. You cannot decrease the block or inode allotment for a cache. To decrease the size of a cache, you must remove it and create it again with different parameters.
Currently maxfilesize is ignored by cachefs, therefore, setting it will have no effect.
CacheFS Resource Parameters
You can specify the following CacheFS resource parameters as arguments to the -o option. Separate multiple parameters with commas.
OPERANDS
- cache_directory
-
The directory under which the cache is actually stored.
- mntpt1
-
The directory where the CacheFS is mounted.
USAGE
See largefile(5) for the description of the behavior of cfsadmin when encountering files greater than or equal to 2 Gbyte ( 231 bytes).
EXAMPLES
Example 1 Creating a cache directory.
The following example creates a cache directory named /cache:
example# cfsadmin -c /cache |
Example 2 Creating a cache specifying maxblocks, minblocks and threshblocks.
The following example creates a cache named /cache1 that can claim a maximum of 60 percent of the blocks in the front file system, can use 40 percent of the front file system blocks without interference by CacheFS internal control mechanisms, and has a threshold value of 50 percent. The threshold value indicates that after CacheFS reaches its guaranteed minimum, it cannot claim more space if 50 percent of the blocks in the front file system are already used.
example# cfsadmin -c -o maxblocks=60,minblocks=40, threshblocks=50 /cache1 |
Example 3 Changing the maxfilesize parameter.
The following example changes the maxfilesize parameter for the cache directory /cache2 to 2 megabytes:
example# cfsadmin -u -o maxfilesize=2 /cache2 |
Example 4 Listing the contents of a cache directory.
The following example lists the contents of a cache directory named /cache3 and provides statistics about resource utilization:
example# cfsadmin -l /cache3 |
Example 5 Removing a cached file system.
The following example removes the cached file system with cache ID 23 from the cache directory /cache3 and frees its resources (the cache ID is part of the information returned by cfsadmin -l):
example# cfsadmin -d 23 /cache3 |
Example 6 Removeing all cached file systems.
The following example removes all cached file systems from the cache directory /cache3:
example# cfsadmin -d all /cache3 |
Example 7 Checking for consistency in file systems.
The following example checks for consistency all file systems mounted with demandconst enabled. No errors will be reported if no demandconst file systems were found.
example# cfsadmin -s all |
EXIT STATUS
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|---|---|
| Availability | SUNWcsu |
SEE ALSO
cachefslog(1M), cachefsstat(1M), cachefswssize(1M), fsck_cachefs(1M), mount_cachefs(1M), attributes(5), largefile(5)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OPERANDS | USAGE | EXAMPLES | EXIT STATUS | ATTRIBUTES | SEE ALSO
- © 2010, Oracle Corporation and/or its affiliates