Documentation Home
>
man pages section 9: DDI and DKI Kernel Functions
>
Kernel Functions for Drivers
> P
man pages section 9: DDI and DKI Kernel Functions
P
pci_config_get16(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_get32(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_get64(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_get8(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_getb(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_getl(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_getll(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_getw(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_put16(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_put32(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_put64(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_put8(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_putb(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_putl(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_putll(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_putw(9F)
– read or write single datum of various sizes to the PCI Local Bus Configuration space
pci_config_setup(9F)
– setup or tear down the resources for enabling accesses to the PCI Local Bus Configuration space
pci_config_teardown(9F)
– setup or tear down the resources for enabling accesses to the PCI Local Bus Configuration space
pci_report_pmcap(9F)
– Report Power Management capability of a PCI device
pci_restore_config_regs(9F)
– save and restore the PCI configuration registers
pci_save_config_regs(9F)
– save and restore the PCI configuration registers
physio(9F)
– perform physical I/O
pm_busy_component(9F)
– Control device component availability for Power Management
pm_create_components(9F)
– Create or destroy power-manageable components
pm_destroy_components(9F)
– Create or destroy power-manageable components
pm_get_normal_power(9F)
– get or set a device component's normal power level
pm_idle_component(9F)
– Control device component availability for Power Management
pm_lower_power(9F)
– Raise or lower power of components
pm_power_has_changed(9F)
– Notify Power Management framework of autonomous power level change
pm_raise_power(9F)
– Raise or lower power of components
pm_set_normal_power(9F)
– get or set a device component's normal power level
pm_trans_check(9F)
– Device power cycle advisory check
pollwakeup(9F)
– inform a process that an event has occurred
proc_ref(9F)
– send a signal to a process
proc_signal(9F)
– send a signal to a process
proc_unref(9F)
– send a signal to a process
ptob(9F)
– convert size in pages to size in bytes
pullupmsg(9F)
– concatenate bytes in a message
put(9F)
– call a STREAMS put procedure
putbq(9F)
– place a message at the head of a queue
putctl1(9F)
– send a control message with a one-byte parameter to a queue
putctl(9F)
– send a control message to a queue
putnext(9F)
– send a message to the next queue
putnextctl1(9F)
– send a control message with a one-byte parameter to a queue
putnextctl(9F)
– send a control message to a queue
putq(9F)
– put a message on a queue
© 2010, Oracle Corporation and/or its affiliates