Use one of the following methods to check the status of a soft partition:
From the Enhanced Storage tool within the Solaris Management Console, open the Volumes node. Choose the soft partition that you want to monitor, then choose Action->Properties, then follow the instructions on screen. For more information, see the online help.
To view the existing configuration, use the following format of the metastat command:
soft-partition is the name of the partition you want to check.
This example shows checking the status of soft partition d1, which includes two extents and is built on the RAID 1 volume d100.
# metastat d1 d1: soft partition component: d100 state: OKAY size: 42674285 blocks Extent Start Block Block Count 0 10234 40674285 1 89377263 2000000 d100: Mirror Submirror 0: d10 State: OKAY Read option: roundrobin (default) Write option: parallel (default) Size: 426742857 blocks d10: Submirror of d100 State: OKAY Hot spare pool: hsp002 Size: 426742857 blocks Stripe 0: (interlace: 32 blocks) Device Start Block Dbase State Hot Spare c3t3d0s0 0 No Okay