After you create a disk set, you can create volumes and hot spare pools using the disks that you added to the disk set. You can use either the Enhanced Storage tool within the Solaris Management Console or the command line utilities.
To create volumes or other Solaris Volume Manager devices within a disk set, use one of the following methods:
From the Enhanced Storage tool within the Solaris Management Console, open the Volumes, State Database Replicas, or Hot Spare Pools node. Choose Action->Create, then follow the instructions in the wizard. For more information, see the online help.
Use the command line utilities with the same basic syntax you would without a disk set, but add -s diskset-name immediately after the command for every command.
# metainit -s blue d11 1 1 c1t6d0s0 blue/d11: Concat/Stripe is setup # metainit -s blue d12 1 1 c2t6d0s0 blue/d12: Concat/Stripe is setup # metainit -s blue d10 -m d11 blue/d10: Mirror is setup # metattach -s blue d10 d12 blue/d10: submirror blue/d12 is attached # metastat -s blue blue/d10: Mirror Submirror 0: blue/d11 State: Okay Submirror 1: blue/d12 State: Resyncing Resync in progress: 0 % done Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Size: 17674902 blocks blue/d11: Submirror of blue/d10 State: Okay Size: 17674902 blocks Stripe 0: Device Start Block Dbase State Reloc Hot Spare c1t6d0s0 0 No Okay blue/d12: Submirror of blue/d10 State: Resyncing Size: 17674902 blocks Stripe 0: Device Start Block Dbase State Reloc Hot Spare c2t6d0s0 0 No Okay |
This example shows the creation of a mirror, d10, in disk set blue, that consists of submirrors (RAID 0 devices) d11 and d12.