test

System Administration Guide: Devices and File Systems

ProcedureHow to Configure a SCSI Controller

The following procedure uses SCSI controller c1 as an example of configuring a SCSI controller.

Steps

  1. Become superuser.

  2. Configure a SCSI controller.


    # cfgadm -c configure c1

  3. Verify that the SCSI controller is configured.


    # cfgadm -al
Ap_Id                Type         Receptacle   Occupant     Condition
c0                   scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0       disk         connected    configured   unknown
c0::rmt/0            tape         connected    configured   unknown
c1                   scsi-bus     connected    configured   unknown
c1::dsk/c1t3d0       disk         connected    configured   unknown
c1::dsk/c1t4d0       unavailable  connected    unconfigured unknown

    The previous unconfigure procedure removed all devices on the SCSI bus. Now all the devices are configured back into the system.