S

SCC module

FRU name

Motherboard Components in Sun SPARC Enterprise T5140 Servers

Motherboard Components in Sun SPARC Enterprise T5240 Servers

installing, Install the SCC Module

removing, Remove the SCC Module

screws for rack mounting, Install the Slide Rail Assemblies

serial port configuration property, commit a change, Commit a Change to a Serial Port Configuration Property

serial terminal settings, Power On the System for the First Time

server dismounting, Dismounting the Servers

service processor

accessing with network management port, Log Into the Service Processor Using the Network Management Port

accessing with serial management port, Log Into the Service Processor Using the Serial Management Port

connecting to the system console, Devices in the OpenBoot Device Tree

network management port not operational until configured, Configure the Service Processor

powering on for the first time, Power On the System for the First Time

powering on the system, Using the Service Processor for Common Operations

set command, Configure the Service Processor Network Management Port

service processor,

See also ILOM

service processor prompt, Power Off the Server (Service Processor Command)

Service Required (system LED), LED Overview

cleared byenablecomponent command, Clear POST-Detected Faults

interpreting to diagnose faults

LED Overview

LED Overview

triggered by ILOM, ILOM Troubleshooting Overview

triggered by power supply fault, Power Supplies Overview

set /SYS/LOCATE (-> command), Locate the System

set command, Configure the Service Processor Network Management Port

andcomponent_state property, Clear POST-Detected Faults

set keyswitch command

Examine the System for Faults

Examine the System for Faults

setdate command, Install a Battery

setenv (OpenBoot command), Use a Local Graphics Monitor

setkeyswitch parameter

Service-Related ILOM Command Summary

Upgrade Memory Configuration With Additional FB-DIMMs

setlocator command

Service-Related ILOM Command Summary

Extend the Server to the Maintenance Position

Extend the Server to the Maintenance Position

setscn command, Power Distribution/Fan Module Components in Sun SPARC Enterprise T5140 Servers

show /SP/network command, Configure the Service Processor Network Management Port

show-disks command, Boot the Solaris Operating System

show faulty command, Service-Related ILOM Command Summary

show faulty command, and Service Required LED, LED Overview

show faulty command, using to check for faults, Diagnostics Tools Quick Reference

showcomponent command, Display System Components

showenvironment command, Service-Related ILOM Command Summary

showfaults command, syntax, Service-Related ILOM Command Summary

showfru command, Service-Related ILOM Command Summary

showkeyswitch command, Service-Related ILOM Command Summary

showlocator command, Service-Related ILOM Command Summary

showlogs command, Service-Related ILOM Command Summary

showplatform command, Service-Related ILOM Command Summary

shutdown

usingpowercycle -f command (emergency shutdown), Service-Related ILOM Command Summary

usingpowercycle command (graceful shutdown), Service-Related ILOM Command Summary

usingpoweroff -f command (immediate shutdown), Service-Related ILOM Command Summary

usingpoweroff -y command (skip confirmation question), Service-Related ILOM Command Summary

slide rail assembly locks illustrated

front slide rail locks, Install the Slide Rail Assemblies

middle section lever, Install the Slide Rail Assemblies

mounting bracket locating pin lock, Install the Slide Rail Assemblies

mounting bracket release button, Install the Slide Rail Assemblies

slide rail latch, Extend the Server to the Maintenance Position

slide rail spacing tool, Install the Slide Rail Assemblies

slots, ports, and LEDs, illustrated, Port, Connector, and LED Locations for Both Servers

slots, ports, and LEDs illustrated, Port, Connector, and LED Locations for Both Servers

Solaris commands

cfgadm, Hot-Plug a Nonmirrored Disk

cfgadm install_device, cautions against using, Hot-Plug a Nonmirrored Disk

cfgadm remove_device, cautions against using, Hot-Plug a Nonmirrored Disk

raidctl, Hot-Plug a Mirrored Disk

Solaris log files, Diagnostics Tools Quick Reference

Solaris media kit contents, Configure the Host Software

Solaris OS, checking log files for fault information, Diagnostics Tools Quick Reference

Solaris Predictive Self-Healing (PSH),, See Predictive Self-Healing (PSH)

spacing tool for slide rails, Install the Slide Rail Assemblies

Standby mode, AC Power Cable Notes

standby mode, when AC connected, Cabling Notes for Both Servers

standby voltage, 3.3v, Power On the System for the First Time

standby voltage causes service processor to power on, Install the Hardware

stop /SYS (ILOM command), Power Off the Server (Service Processor Command)

stop bit, Power On the System for the First Time

strain relief housing

Assemble the DC Input Power Cable

Install the Strain Relief Housings

SunVTS

tests, Run the SunVTS Software

user interfaces, Run the SunVTS Software

using for fault diagnosis, Diagnostics Tools Quick Reference

switch, Physical Presence, Platform-Specific ILOM Features

system, communicating with, Communicating With the System

system components, See components

system console, log in, Log In to the System Console

system console escape sequence#., Power Cycle the System

system identification, change, Change System Identification Information (CLI)