Modify RSC Configuration Variables
Using the RSC GUI or RSC shell, set the following configuration variables as shown.
Table B-4 MultiTech Modem II RSC Settings|
GUI Setting |
Configuration Variable Setting |
|---|---|
|
Serial Port Settings
Baud Rate: 9600 Enable hardware handshaking |
serial_baud 9600 serial_hw_handshake true |
|
Alert Settings->Pager->Pager 1->Advanced
Baud Rate: 9600 Modem Init. String: &D3&E0&E14$BA1 |
page_baud1 9600 page_init1 &D3&E0&E14$BA1 |
|
Alert Settings->Pager->Pager 2->Advanced
Baud Rate: 9600 Modem Init. String: &D3&E0&E14$BA1 |
page_baud2 9600 page_init2 &D3&E0&E14$BA1 |
The string &D3 sets the modem to reset when DTR drops, the string &E0 disables error correction, the string &E14 disables data compression, and the string $BA1 turns off speed conversion.
To check that these settings are correct, use the rscadm show command.
- © 2010, Oracle Corporation and/or its affiliates