DIP switches for the Courier V.Everything modem should be set according to the following table.
Table B-5 Courier V.Everything DIP Switch Settings
Switch |
Switch Function |
Setting: Off/On |
---|---|---|
1 |
Normal response to DTR signal/ignore DTR signal |
Normal response to DTR signal: Off |
2 |
Verbal/numeric result code format |
Verbal result code format: Off |
3 |
Display/suppress result codes |
Display result codes: On |
4 |
Echo/do not echo offline commands |
Do not echo offline commands: On |
5 |
Auto-answer/do not auto-answer |
Auto-answer: Off |
6 |
Send carrier detect signal normally/always send CD |
Send carrier detect signal normally: Off |
7 |
Display all result codes/display only when originating |
Display all result codes: Off |
8 |
Act on AT commands (smart)/ignore AT commands (dumb) |
Act on AT commands: On |
9 |
Disconnect on receipt of +++/enter online command mode on receipt of +++ |
Disconnect on receipt of +++: Off |
10 |
Load the configuration that is stored in non-volatile memory/load the &F0 configuration from read-only memory |
Load the configuration that is stored in non-volatile memory: Off |